patch-2.3.31 linux/Documentation/joystick.txt
Next file: linux/MAINTAINERS
Previous file: linux/Documentation/joystick-parport.txt
Back to the patch index
Back to the overall index
- Lines: 697
- Date:
Tue Dec 7 10:13:11 1999
- Orig file:
v2.3.30/linux/Documentation/joystick.txt
- Orig date:
Sun Nov 7 16:37:33 1999
diff -u --recursive --new-file v2.3.30/linux/Documentation/joystick.txt linux/Documentation/joystick.txt
@@ -1,5 +1,6 @@
- Linux Joystick driver v1.2.13
- (c) 1996-1998 Vojtech Pavlik <vojtech@suse.cz>
+ Linux Joystick driver v1.2.15
+ (c) 1996-1999 Vojtech Pavlik <vojtech@suse.cz>
+ Sponsored by SuSE
----------------------------------------------------------------------------
0. Disclaimer
@@ -38,18 +39,18 @@
In addition to these it also supports some of the new PC joysticks that
use proprietary digital protocols to communicate over the gameport,
-currently by FPGaming, Genius, Gravis, Logitech, MadCatz, Microsoft and
-ThrustMaster. Creative Labs protocol support is still to be done.
+currently by FPGaming, Gravis, Logitech, MadCatz, Microsoft, Creative and
+ThrustMaster. Saitek protocol support is still to be done.
The driver also includes support for many gamepads and joysticks that were
used by various non-PC computers and game consoles. These include Multi
system joysticks (Atari, Amiga, Commodore, Amstrad), Sega gamepads (Master
-System, Genesis, Saturn), Nintendo gamepads (NES, SNES), Sony gamepads (PSX).
-Support for N64, Atari Jaguar, Atari 2600, NES FourScore, SNES MultiTap,
-PSX NegCon and others might be added later.
+System, Genesis, Saturn), Nintendo gamepads (NES, SNES, N64), Sony gamepads
+(PSX). Support for Atari Jaguar, Atari 2600, NES FourScore, SNES MultiTap
+and others might be added later.
Last, but not least there is also native Amiga joystick support for the
-Amiga linux port.
+Amiga Linux port.
Should you encounter any problems while using the driver, or joysticks
this driver can't make complete use of, I'm very interested in hearing about
@@ -57,18 +58,13 @@
The joystick package is available at the following FTP sites:
+ ftp://ftp.suse.cz/pub/development/joystick/
ftp://atrey.karlin.mff.cuni.cz/pub/linux/joystick/
-
- The joystick driver is also included in the Linux 2.1+ kernels:
-
- ftp://linux.kernel.org/pub/linux/kernel/
+ ftp://ftp.gts.cz/pub/linux/joystick/
And a homepage of the driver is at:
http://www.suse.cz/development/joystick/
-
- Mirrors of the homepage are at:
-
http://atrey.karlin.mff.cuni.cz/~vojtech/joystick/
http://www.trylinux.com/projects/joystick/
http://www.linuxgames.com/joystick/
@@ -92,7 +88,21 @@
To compile the utilities in the joystick package, and the driver itself,
as a standalone module, you first unpack the package, and then edit the
Makefile to meet your needs (namely whether are you using versioned
-modules). Then you compile it
+modules). You will also need an unpacked and configured
+
+ make config
+
+kernel in
+
+ /usr/src/linux
+
+Furthermore, if you're using versioned modules, you'll also need
+
+ make dep
+
+done on the kernel, to create some needed files.
+
+After that, you compile the joystick driver
make
@@ -163,6 +173,14 @@
where 'something' is the type of your joystick. See below for more precise
explanation.
+ Alternately you can add the lines
+
+ alias char-major-15 joy-something
+ options joy-something js_xx=x,x,x,x,...
+
+ to the /etc/conf.modules file, so that the joystick module will be loaded
+automatically when the /dev/js devices are accessed.
+
2.5 Verifying that it works
~~~~~~~~~~~~~~~~~~~~~~~~~~~
For testing the joystick driver functionality, there is the jstest
@@ -197,14 +215,14 @@
calibration using the jstest command, and if you do, you then can save the
correction coefficients into a file
- jscal -s /dev/js0 > /etc/joystick.cal
+ jscal -p /dev/js0 > /etc/joystick.cal
And add a line to your rc script executing that file
source /etc/joystick.cal
This way, after the next reboot your joystick will remain calibrated. You
-can also add the jscal -s line to your shutdown script.
+can also add the jscal -p line to your shutdown script.
3. HW specific driver information
@@ -222,7 +240,7 @@
* 2-axis, 4-button joystick
* 3-axis, 4-button joystick
-* Two 2-axis, 2-button joysticks on an Y-cable
+* 4-axis, 4-button joystick
For other joystick types (more/less axes, hats, and buttons) support
you'll need to specify the types either on the kernel command line or on the
@@ -261,6 +279,8 @@
Joystick | 'm' value
----------------------------------------------------
+ Simple 2-button 2-axis joystick | 0x0033
+ Second simple joystick on Y-cable | 0x00cc
Genius Flight2000 F-12 | 0x00f3
Genius Flight2000 F-21 | 0x08f7
Genius Flight2000 F-22 | 0x02ff
@@ -268,9 +288,11 @@
Genius MaxFire G-07 | 0xf0f3
Genius PowerStation | 0xf0f3
Laing #1 PC SuperPad | 0xf0f3
+ Logitech Wingman | 0x003b
Microsoft SideWinder Standard | 0x003b
QuickShot QS-201 SuperWarrior | 0x00fb
Saitek Megapad XII | 0x30f3
+ PC Powerpad Pro | 0x30f3
In case you have one of the joystick in the table below, and it doesn't
work with a specific driver in digital mode for some reason, you can use
@@ -280,8 +302,7 @@
Joystick | 'm' value
----------------------------------------------------
Gravis GamePad Pro - analog mode | 0x00f3
- Genius Flight2000 F-23 - CHF mode | 0x02ff
- Genius Flight2000 F-23 - FCS mode | 0x08f7
+ Genius Flight2000 F-23 | 0x02ff
Microsoft SideWinder 3D Pro - CHF mode | 0x02ff
Microsoft SideWinder 3D Pro - FCS mode | 0x08f7
@@ -302,70 +323,85 @@
And it would do the same as the above explained command line. Use
whichever way you like best.
-3.2 Microsoft SideWinder and Genius Digital joysticks
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- SideWinder and Genius Digital joysticks are supported by the
+3.2 Microsoft SideWinder joysticks
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ Microsoft 'Digital Overdrive' protocol is supported by the
joy-sidewinder.c module. All currently supported joysticks:
-* SideWinder 3d Pro
-* SideWinder Precision Pro
+* SideWinder 3D Pro
* SideWinder Force Feedback Pro
-* SideWinder Game Pad (up to four, chained together)
-* Genius Flight2000 Digital F-23
+* SideWinder Force Feedback Wheel
+* SideWinder FreeStyle Pro
+* SideWinder GamePad (up to four, chained together)
+* SideWinder Precision Pro
are autodetected, and thus no module parameters are needed.
+ There is one caveat with the 3D Pro. There are 9 buttons reported,
+although the joystick has only 8. The 9th button is the mode switch on the
+rear side of the joystick. However, moving it, you'll reset the joystick,
+and make it unresponsive for about a one third of a second. Furthermore, the
+joystick will also re-center itself, taking the position it was in during
+this time as a new center position. Use it if you want, but think first.
+
The SideWinder Standard is not a digital joystick, and thus is supported
-by the analog driver described above. SideWinder FreeStyle Pro and
-SideWinder Force Feedback Wheel are not supported yet.
+by the analog driver described above.
-3.3 Logitech Digital joysticks
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Logitech Digital joysticks are supported by the joy-logitech.c module. It
-currently supports these devices:
+3.3 Logitech ADI devices
+~~~~~~~~~~~~~~~~~~~~~~~~
+ Logitech ADI protocol is supported by the joy-logitech.c module. It should
+support any Logitech device using this protocol. This includes, but is not
+limited to:
-* Logitech Wingman Extreme Digital
* Logitech CyberMan 2
* Logitech ThunderPad Digital
-
- All three are autodetected, and thus no parameters to the module are
-needed.
-
- Logitech Wingman is not a digital joystick and is handled by the analog
-driver described above. Logitech Wingman Warrior communicates through a
-serial port and is not supported yet. Logitech Wingman Force, Wingman
-Formula, Wingman Formula Force, Wingman Gamepad, Wingman Interceptor are USB
-joysticks, with optional serial port connection, and are not supported yet.
+* Logitech WingMan Extreme Digital
+* Logitech WingMan Formula
+* Logitech WingMan Interceptor
+* Logitech WingMan GamePad
+* Logitech WingMan GamePad USB
+* Logitech WingMan GamePad Extreme
+* Logitech WingMan Extreme Digital 3D
+
+ ADI devices are autodetected, and the driver supports up to two (any
+combination of) devices on a single gameport, using an Y-cable or chained
+together.
+
+ Logitech WingMan Joystick, Logitech WingMan Attack, Logitech WingMan
+Extreme and Logitech WingMan ThunderPad are not digital joysticks and are
+handled by the analog driver described above. Logitech WingMan Warrior and
+Logitech Magellan are supported by serial drivers described below. Logitech
+CyberMan, Logitech WingMan Force and Logitech WingMan Formula Force are not
+supported yet.
3.4 Gravis GrIP
~~~~~~~~~~~~~~~
- Gravis GrIP gamepads are supported by the joy-gravis.c module. It
+ Gravis GrIP protocol is supported by the joy-gravis.c module. It
currently supports:
* Gravis GamePad Pro
* Gravis Xterminator
-* Gravis Blackhawk Digital
+* Gravis BlackHawk Digital
- All these pads are autodetected, and you can even use any combination of
-up to two of these pads either chained together or using an Y-cable on a single
-gameport.
-
-GrIP MultiPort support is in the works. Gravis Xcalibur, ArcadeXtreme,
-GamePad Pro/M are joysticks/pads that probably never reached mass
-production. Gravis Stinger is a serial device and hopefully will be
-supported in the future.
+ All these devices are autodetected, and you can even use any combination
+of up to two of these pads either chained together or using an Y-cable on a
+single gameport.
+
+GrIP MultiPort and Gravis Xterminator DualControl aren't supported yet.
+Gravis Stinger is a serial device and hopefully will be supported in the
+future. Other Gravis joysticks are supported by the joy-analog driver.
3.5 FPGaming A3D and MadCatz A3D
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- The Assasin 3D protocol created by FPGaming, is used both by FPGaming
+ The Assassin 3D protocol created by FPGaming, is used both by FPGaming
themselves and is licensed to MadCatz. A3D devices are supported by the
-joy-assasin.c module. It currently supports:
+joy-assassin.c module. It currently supports:
-* FPGaming Assasin 3D
+* FPGaming Assassin 3D
* MadCatz Panther
* MadCatz Panther XL
- All these devices are autodetected. Because the Assasin 3D and the Panther
+ All these devices are autodetected. Because the Assassin 3D and the Panther
allow connecting analog joysticks to them, these are supported in this
driver, too. The driver uses the js_as parameter for the analog joysticks,
which has the same syntax as js_an for the analog driver.
@@ -376,20 +412,33 @@
3.6 ThrustMaster DirectConnect (BSP)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The TM DirectConnect (BSP) protocol is supported by the joy-thrustmaster.c
-module. It currently supports:
+module. This includes, but is not limited to:
* ThrustMaster Millenium 3D Inceptor
* ThrustMaster 3D Rage Pad
+* ThrustMaster Fusion Digital Game Pad
- Both these drvices are autodetected, and thus no parameters to the module
+ Devices not directly supported, but hopefully working are:
+
+* ThrustMaster FragMaster
+* ThrustMaster Attack Throttle
+
+ If you have one of these, contact me.
+
+ BSP devices are autodetected, and thus no parameters to the module
are needed.
- The Millenium and Rage Pad should work fine now. TM WCS III won't work,
-because important parts of code for that are missing. I'm not sure if it was
-ever mass produced.
+3.7 Creative Labs Blaster
+~~~~~~~~~~~~~~~~~~~~~~~~~
+ The Blaster protocol is supported by the joy-creative.c module. It
+currently supports only the:
+
+* Creative Blaster GamePad Cobra
+
+ Up to two of these can be used on a single gameport, using an Y-cable.
-3.7 PDPI Lightning 4 gamecards
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+3.8 PDPI Lightning 4 gamecards
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PDPI Lightning 4 gamecards are supported by the joy-lightning.c module.
This driver is only for analog joysticks connected to the card - if you want
to use some of the digital devices, you need to use its specific driver. The
@@ -420,8 +469,49 @@
See the description of analog joystick driver for explanations of m0 and
n0 values.
-3.8 Amiga
-~~~~~~~~~
+3.9 Trident 4DWave / Aureal Vortex
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ Soundcards with a Trident 4DWave DX/NX or Aureal Vortex chipset provide an
+"Enhanced Game Port" mode where the soundcard handles polling the joystick.
+This mode is supported by the joy-pci module.
+
+ If no module parameters are given, the joy-pci module will set all the
+soundcards it finds to "enhanced" mode, and will try to autodetect the type
+of attached joystick. It can only detect the same types of joysticks that
+the joy-analog module can.
+
+ This module accepts parameters in the form:
+
+ js_pci=t0,i0,m0,n0,t1,i1,m1,n1,....
+
+ The "t" value specifies the type of card, as follows:
+
+ t | Card Type
+ ----------------------------
+ 0 | Trident 4DWave DX
+ 1 | Trident 4DWave NX
+ 2 | Aureal Vortex1 (Au8820 chipset)
+ 3 | Aureal Vortex2 (Au8830 chipset)
+
+ If you have more than one card of the same type, the "i" parameter lets
+you choose which card to apply the "m" and "n" values to. It counts from
+"0". (The driver detects cards in the order listed in the above table.)
+
+ The "m" and "n" values have the same meaning as for the analog module,
+with the exception that the value m=0, n=0 indicates that joy-pci should
+completely ignore that port. This can be useful to reserve a certain port
+for purely MIDI operation.
+
+ For example, let's say you have 3 sound cards - a 4Dwave DX, a 4DWave NX,
+and a Vortex 2. You have a three-axis, four-button, one-hat CHF- compatible
+joystick on the DX. You use the NX to interface to an external MIDI device.
+Finally, you have two two-axis, two-button joysticks on the Vortex. Your
+command line might look like:
+
+ js_pci=0,0,0x207,0,1,1,0,0,3,0,0x33,0xcc
+
+3.10 Amiga
+~~~~~~~~~~
Amiga joysticks, connected to an Amiga, are supported by the joy-amiga.c
driver. Since they can't be autodetected, the driver has a command line.
@@ -438,10 +528,75 @@
No more joystick types are supported now, but that should change in the
future if I get an Amiga in the reach of my fingers.
-3.9 Game console and 8-bit pads and joysticks
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+3.11 Game console and 8-bit pads and joysticks
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
See joystick-parport.txt for more info.
+3.12 SpaceTec/LabTec devices
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ SpaceTec serial devices communicate using the SpaceWare protocol. It is
+supported by the joy-spaceorb and joy-spaceball drivers. The devices currently
+supported by joy-spaceorb are:
+
+* SpaceTec SpaceBall Avenger
+* SpaceTec SpaceOrb 360
+
+Devices currently supported by joy-spaceball are:
+
+* SpaceTec SpaceBall 4000 FLX
+
+ In addition to having the joy-spaceorb/spaceball module in the kernel, you
+also need to attach a serial port to it. to do that, run the jsattach
+program:
+
+ jsattach --spaceorb /dev/ttySx &
+or
+ jsattach --sball4 /dev/ttySx &
+
+where /dev/ttySx is the serial port which the device is connected to. After
+doing this, the device will be reported and will start working.
+
+ There is one caveat with the SpaceOrb. The button #6, the on the bottom
+side of the orb, although reported as an ordinary button, causes internal
+recentering of the spaceorb, moving the zero point to the position in which
+the ball is at the moment of pressing the button. So, think first before
+you bind it to some other function.
+
+SpaceTec SpaceBall 2003 FLX and 3003 FLX are not supported yet.
+
+3.13 Logitech SWIFT devices
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ The SWIFT serial protocol is supported by the joy-warrior module. It
+currently supports only the:
+
+* Logitech WingMan Warrior
+
+but in the future, Logitech CyberMan (the original one, not CM2) could be
+supported as well. To use the module, you need to run jsattach after you
+insert/compile the module into your kernel:
+
+ jsattach --warrior /dev/ttySx &
+
+ttySx is the serial port your Warrior is attached to.
+
+3.14 Magellan / Space Mouse
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ The Magellan (or Space Mouse), manufactured by LogiCad3d (formerly Space
+Systems), for many other companies (Logitech, HP, ...) is supported by the
+joy-magellan module. It currently supports only the:
+
+* Magellan 3D
+* Space Mouse
+
+models, the additional buttons on the 'Plus' versions are not supported yet.
+
+ To use it, you need to attach the serial port to the driver using the
+
+ jsattach --magellan /dev/ttySx &
+
+command. After that the Magellan will be detected, initialized, will beep,
+and the /dev/jsX device should become useable.
+
4. Troubleshooting
~~~~~~~~~~~~~~~~~~
There is quite a high probability that you run into some problems. For
@@ -452,9 +607,10 @@
jstest --normal /dev/js0
jstest --old /dev/js0
- If your trouble stems from the fact the drivers can't detect the attached
-joystick, and/or you decide you need my help (which I will gladly provide),
-please use the joydump utility first. It's created just by typing
+ If your trouble stems from the fact the drivers can't detect the joystick
+attached to your gameport, and you decide you need my help (which I will
+gladly provide), please use the joydump utility first. It's created just by
+typing
make joydump.o
@@ -465,64 +621,73 @@
in the same directory. It will return a 'device busy' or 'initialization
failed' error. This is perfectly okay. It has already done it's job. The
-results can be found in the system log. Please send me the results along
-with your problem report.
+results can be found in the system log or in the output of the
+
+ dmesg
+
+command. Please send me the results along with your problem report.
Oh, and read the FAQ! :)
5. FAQ
~~~~~~
- Q: The driver doesn't find any joysticks connected to my soundcard with the
-message "joy-something: no joysticks found" and "joy-something.o:
-init_module: Device or resource busy." or "Initialization of joy-something
-failed" What could be the cause?
- A: The most common cause is that the joystick port on your soundcard is
-not enabled. If it is an ISA PnP card, you'll need isapnptools to configure
-the gameport. Non-PnP cards usually use some option to the sound driver -
-see the sound driver docs and source and enable the port.
-
- Q: Any access to the joystick devices gives me "Operation not supported by
-device". What am I doing wrong?
- A: You're running a 2.0 kernel and you forgot to insmod the hardware
-specific module. You not only need the joystick.o, but also one of the other
-joy-*.o files (most usually joy-analog.o), as described in this document,
-section 2. If you are not using modules, then you didn't say 'Y' to any of
-the hardware-specific questions. Again, see section 2. If you did select
-the specific support, and you still get this message, check that you
-selected the right one, and if it still doesn't work, go to the previous
-FAQ.
-
- Q: Everything is fine, except I get "No such device" error when I try to
-do anything with /dev/js0. What's the cause?
- A: You're running a 2.1 kernel and you want to read the previous FAQ.
-
- Q: Upon 'insmod joystick.o' I get a LOT of unresolved symbols, including
-printk and others. Why?
- A: You either don't have your kernel compiled with module support. If
-that's the cause, re-compile your kernel with module support switched on.
-Or, you use versioned symbols, and don't have -DMODVERSIONS in the joystick
-driver Makefile, or vice versa. Correct the situation by either removing or
-adding -DMODVERSIONS to the Makefile.
-
- Q: Running 'jstest 1' or 'jscal 1' doesn't work, and returns with "File
-not found" error. What is the problem?
- A: The command line interface for these tools is different from what
-version 0.8.0 used. You have to specify the whole device name, eg. 'jstest
-/dev/js0'.
-
- Q: Running 'jstest /dev/js0' results in "File not found" error. What's the
-cause?
- A: The device files don't exist. Run 'make devs'.
-
- Q: Is it possible to connect my old Atari/Commodore/Amiga/console joystick
-or pad that uses a 9-pin D-type cannon connector to the serial port of my
-PC?
- A: Yes, it is possible, but it'll burn your serial port or the pad. It
-won't work, of course.
-
- Q: My joystick doesnt work with Quake / Quake 2. What's the cause?
- A: Quake / Quake 2 don't support joystick. Use joy2key to simulate keypresses
-for them.
+Q: The driver doesn't find any joysticks connected to my soundcard with the
+ message "joy-something: no joysticks found" and "joy-something.o:
+ init_module: Device or resource busy." or "Initialization of joy-something
+ failed" What could be the cause?
+A: The most common cause is that the joystick port on your soundcard is
+ not enabled. If it is an ISA PnP card, you'll need isapnptools to configure
+ the gameport. Non-PnP cards usually use some option to the sound driver -
+ see the sound driver docs and source and enable the port. Note that in case
+ of a PnP card you have to load the joystick driver as a module after running
+ the isapnp command, it will not work in the opposite order.
+
+Q: Any access to the joystick devices gives me "Operation not supported by
+ device". What am I doing wrong?
+A: You're running a 2.0 kernel and you forgot to insmod the hardware
+ specific module. You not only need the joystick.o, but also one of the other
+ joy-*.o files (most usually joy-analog.o), as described in this document,
+ section 2. If you are not using modules, then you didn't say 'Y' to any of
+ the hardware-specific questions. Again, see section 2. If you did select
+ the specific support, and you still get this message, check that you
+ selected the right one, and if it still doesn't work, go to the previous
+ FAQ.
+
+Q: Everything is fine, except I get "No such device" error when I try to
+ do anything with /dev/js0. What's the cause?
+A: You're running a 2.1 or 2.2. kernel and you want to read the previous FAQ.
+
+Q: Upon 'insmod joystick.o' I get a LOT of unresolved symbols, including
+ 'printk' and others. Why?
+A: You either don't have your kernel compiled with module support. If
+ that's the cause, re-compile your kernel with module support switched on.
+ Or, you use versioned symbols, and don't have -DMODVERSIONS in the joystick
+ driver Makefile, or vice versa. Correct the situation by either removing or
+ adding -DMODVERSIONS to the Makefile.
+
+Q: Upon 'insmod joy-something' I get a bunch of unresolved symbols, like
+ 'js_register_port, js_unregister device' and others. What's wrong?
+A: You need to 'insmod joystick.o' first.
+
+Q: Running 'jstest 1' or 'jscal 1' doesn't work, and returns with "File
+ not found" error. What is the problem?
+A: The command line interface for these tools is different from what
+ version 0.8.0 used. You have to specify the whole device name, eg. 'jstest
+ /dev/js0'.
+
+Q: Running 'jstest /dev/js0' results in "File not found" error. What's the
+ cause?
+A: The device files don't exist. Run 'make devs'.
+
+Q: Is it possible to connect my old Atari/Commodore/Amiga/console joystick
+ or pad that uses a 9-pin D-type cannon connector to the serial port of my
+ PC?
+A: Yes, it is possible, but it'll burn your serial port or the pad. It
+ won't work, of course.
+
+Q: My joystick doesn't work with Quake / Quake 2. What's the cause?
+A: Quake / Quake 2 don't support joystick. Use joy2key to simulate keypresses
+ for them.
6. Programming Interface
~~~~~~~~~~~~~~~~~~~~~~~~
@@ -565,23 +730,31 @@
Brian Gerst <bgerst@quark.vpplus.com>
Andree Borrmann <a.borrmann@tu-bs.de>
Martin Giguere <zefrench@hotmail.com>
+ David Thompson <dcthomp@mail.utexas.edu>
+ Justin Wake <spectre@telefragged.com>
+ Benoit Triquet <benoit@adsl-216-100-248-201.dsl.pacbell.net>
+ John Dahlstrom <jodaman@bradley.edu>
+ Dan Gohman <gohmandj@mrs.umn.edu>
+ Joe Krahn <krahn@niehs.nih.gov>
+ David Kuder <alphagod@penguinpowered.com>
+ Raymond Ingles <sorceror@tir.com>
If you think you should be in this list and are not, it's possible that
I forgot to include you - contact me and I'll correct the error. :)
Thanks to KYE Systems Europe, who provided me with driver sources for the
-Genius Flight2000 Digital F-23, which happens to be compatible with
-Microsoft SideWinder 3d Pro.
+Genius Flight2000 Digital F-23, which happens to be identical (in software)
+to Microsoft SideWinder 3D Pro.
Thanks to ThrustMaster Inc. who provided me with docs for their digital
-protocol, and to Trystan A Larey-williams <axe@mail.wsu.edu>, who wrote an
-attempt of a driver for them.
+protocol specifications, and to Trystan A Larey-Williams <axe@mail.wsu.edu>,
+who wrote an attempt of a driver for them.
Thanks to Creative Labs Europe, and Ifor Powell <ipowell@cle.creaf.com>,
-who provided me with docs for their first generation gamepad.
+who provided me with docs for their first generation Blaster GamePad.
Special thanks go to FP-Gaming, Inc. and James C Barnes <james@fpgaming.com>,
-who provided me with help and detailed information about the Assasin 3D
+who provided me with help and detailed information about the Assassin 3D
protocol and devices, and even sent me a Panther and Panther XL for testing,
along with cool T-shirts.
@@ -590,10 +763,20 @@
code for their L4 gamecard, and sending me the card to test my driver with
it.
+ Thanks to LogiCad3D for their support, for having the specifications
+online and for the nice music on their telephone.
+
+ Special thanks to Logitech, Jerry de Raad <Jerry_de_Raad@logitech.com>,
+Thomas Burgel <Thomas_Burgel@logitech.com>, Avinash Shinde
+<Avinash_Shinde@logitech.com> for providing me with a lot of documentation
+for their devices, and also for a big box, containing a CyberMan2, Wingman
+Extreme, Magellan, Wingman Warrior, two MouseMan mice, and a NewTouch
+keyboard.
+
Thanks to everyone else who helped me develop this package of drivers!
- No thanks to Microsoft, Logitech, and Gravis, who don't release a word
-about their hardware .... :(
+ No thanks to Microsoft and Gravis, who don't release a word about their
+hardware .... :(
8. ChangeLog
~~~~~~~~~~~~
@@ -602,50 +785,3 @@
9. To do
~~~~~~~~
See the TODO file for the list of things planned.
-
-10. Current driver status
-~~~~~~~~~~~~~~~~~~~~~~~~~
- OK means tested and not touched till this driver revision, unknown means
-that the driver was changed since last test, broken means doesn't work,
-incomplete means can't work, because vital parts of support are missing.
-
-joystick.c: 2.1.x kernel interface - OK
-joy-amiga.c: Multi1 stick - unknown
-joy-analog.c: standard joysticks - OK
- FCS hats - OK
- CHF hats & buttons - OK
- XY buttons - OK
- UV buttons - OK
-joy-assasin.c: MadCatz Panther XL - OK
- MadCatz PXL rudder - OK
- MadCatz Panther - OK
- FPG Assasin 3D - OK
-joy-console.c: NES pad - OK
- SNES pad - OK
- Multi1 stick - OK
- Multi2 stick - OK
- PSX - SW OK, HW unreliable
-joy-db9.c: Multi1 stick - OK
- Multi2 stick - OK
- Sega Genesis pad - OK
- Sega Genesis 5 pad - OK
- Sega Genesis 6 pad - OK
- Sega Saturn pad - unknown
-joy-gravis.c Gravis GamePad Pro - OK
- Gravis Xterminator - OK
- Gravis Blackhawk Digital- OK
-joy-lightning.c PDPI Lightning 4 - OK
-joy-logitech.c WingMan Extreme Digital - OK
- CyberMan 2 - OK
- Thunder Pad Digital - unknown
-joy-sidewinder.c SW 3D Pro - OK
- Genius F-23 - OK
- SW GP - OK
- SW PP - OK
- SW FFP - OK
-joy-thrustmaster.c Millenium 3D Inceptor - OK
- 3D-Rage Pad - OK
-joy-turbografx.c Multi1 stick - OK
-
-Please help me and send me success / failure reports for the drivers,
-I need to know what works, and what needs to be debugged. Thank you.
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)