patch-2.4.13 linux/drivers/pcmcia/sa1100_simpad.c

• Lines: 137
• Date: Thu Oct 11 09:43:29 2001
• Orig file: v2.4.12/linux/drivers/pcmcia/sa1100_simpad.c
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.4.12/linux/drivers/pcmcia/sa1100_simpad.c linux/drivers/pcmcia/sa1100_simpad.c
@@ -0,0 +1,136 @@
+/*
+ * drivers/pcmcia/sa1100_pangolin.c
+ *
+ * PCMCIA implementation routines for simpad
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/arch/pcmcia.h>
+
+static int simpad_pcmcia_init(struct pcmcia_init *init){
+  int irq, res;
+
+  /* set GPIO_CF_CD & GPIO_CF_IRQ as inputs */
+  GPDR &= ~(GPIO_CF_CD|GPIO_CF_IRQ);
+  //init_simpad_cs3();
+  printk("\nCS3:%x\n",cs3_shadow);
+  PCMCIA_setbit(PCMCIA_RESET);
+  PCMCIA_clearbit(PCMCIA_BUFF_DIS);
+
+  /* Set transition detect */
+  set_GPIO_IRQ_edge( GPIO_CF_CD, GPIO_BOTH_EDGES );
+  set_GPIO_IRQ_edge( GPIO_CF_IRQ, GPIO_FALLING_EDGE );
+
+  /* Register interrupts */
+  irq = IRQ_GPIO_CF_CD;
+  res = request_irq( irq, init->handler, SA_INTERRUPT, "CF_CD", NULL );
+  if( res < 0 ) goto irq_err;
+
+  /* There's only one slot, but it's "Slot 1": */
+  return 2;
+
+irq_err:
+  printk( KERN_ERR "%s: Request for IRQ %lu failed\n", __FUNCTION__, irq );
+  return -1;
+}
+
+static int simpad_pcmcia_shutdown(void)
+{
+  /* disable IRQs */
+  free_irq( IRQ_GPIO_CF_CD, NULL );
+
+  /* Disable CF bus: */
+
+  PCMCIA_setbit(PCMCIA_BUFF_DIS);
+  PCMCIA_clearbit(PCMCIA_RESET);
+  return 0;
+}
+
+static int simpad_pcmcia_socket_state(struct pcmcia_state_array
+				       *state_array)
+{
+  unsigned long levels;
+
+  if(state_array->size<2) return -1;
+
+  memset(state_array->state, 0,
+	 (state_array->size)*sizeof(struct pcmcia_state));
+
+  levels=GPLR;
+
+  state_array->state[1].detect=((levels & GPIO_CF_CD)==0)?1:0;
+
+  state_array->state[1].ready=(levels & GPIO_CF_IRQ)?1:0;
+
+  state_array->state[1].bvd1=1; /* Not available on Simpad. */
+
+  state_array->state[1].bvd2=1; /* Not available on Simpad. */
+
+  state_array->state[1].wrprot=0; /* Not available on Simpad. */
+
+  state_array->state[1].vs_3v=1;  /* Can only apply 3.3V on Simpad. */
+
+  state_array->state[1].vs_Xv=0;
+
+  return 1;
+}
+
+static int simpad_pcmcia_get_irq_info(struct pcmcia_irq_info *info){
+
+  if(info->sock>1) return -1;
+
+  if(info->sock==1)
+    info->irq=IRQ_GPIO_CF_IRQ;
+
+  return 0;
+}
+
+static int simpad_pcmcia_configure_socket(const struct pcmcia_configure
+					   *configure)
+{
+  unsigned long value, flags;
+
+  if(configure->sock>1) return -1;
+
+  if(configure->sock==0) return 0;
+
+  save_flags_cli(flags);
+
+  /* Murphy: BUS_ON different from POWER ? */
+
+  switch(configure->vcc){
+  case 0:
+    PCMCIA_setbit(PCMCIA_BUFF_DIS);
+    break;
+
+  case 33:
+  case 50:
+    PCMCIA_setbit(PCMCIA_BUFF_DIS);
+    break;
+
+  default:
+    printk(KERN_ERR "%s(): unrecognized Vcc %u\n", __FUNCTION__,
+	   configure->vcc);
+    restore_flags(flags);
+    return -1;
+  }
+
+  /* Silently ignore Vpp, output enable, speaker enable. */
+
+  restore_flags(flags);
+
+  return 0;
+}
+
+struct pcmcia_low_level simpad_pcmcia_ops = {
+  simpad_pcmcia_init,
+  simpad_pcmcia_shutdown,
+  simpad_pcmcia_socket_state,
+  simpad_pcmcia_get_irq_info,
+  simpad_pcmcia_configure_socket
+};
+