patch-2.4.22 linux-2.4.22/arch/ia64/sn/io/sn2/pci_bus_cvlink.c
Next file: linux-2.4.22/arch/ia64/sn/io/sn2/pcibr/Makefile
Previous file: linux-2.4.22/arch/ia64/sn/io/sn2/module.c
Back to the patch index
Back to the overall index
- Lines: 812
- Date:
1969-12-31 16:00:00.000000000 -0800
- Orig file:
linux-2.4.21/arch/ia64/sn/io/sn2/pci_bus_cvlink.c
- Orig date:
2003-06-13 07:51:30.000000000 -0700
diff -urN linux-2.4.21/arch/ia64/sn/io/sn2/pci_bus_cvlink.c linux-2.4.22/arch/ia64/sn/io/sn2/pci_bus_cvlink.c
@@ -1,811 +0,0 @@
-/* $Id$
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2002 Silicon Graphics, Inc. All rights reserved.
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/pci_ids.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <asm/sn/types.h>
-#include <asm/sn/hack.h>
-#include <asm/sn/sgi.h>
-#include <asm/sn/io.h>
-#include <asm/sn/driver.h>
-#include <asm/sn/iograph.h>
-#include <asm/param.h>
-#include <asm/sn/pio.h>
-#include <asm/sn/xtalk/xwidget.h>
-#include <asm/sn/sn_private.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/invent.h>
-#include <asm/sn/hcl.h>
-#include <asm/sn/hcl_util.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/xtalk/xtalkaddrs.h>
-#include <asm/sn/klconfig.h>
-#include <asm/sn/nodepda.h>
-#include <asm/sn/pci/pciio.h>
-#include <asm/sn/pci/pcibr.h>
-#include <asm/sn/pci/pcibr_private.h>
-#include <asm/sn/pci/pci_bus_cvlink.h>
-#include <asm/sn/simulator.h>
-#include <asm/sn/sn_cpuid.h>
-
-extern int bridge_rev_b_data_check_disable;
-
-devfs_handle_t busnum_to_pcibr_vhdl[MAX_PCI_XWIDGET];
-nasid_t busnum_to_nid[MAX_PCI_XWIDGET];
-void * busnum_to_atedmamaps[MAX_PCI_XWIDGET];
-unsigned char num_bridges;
-static int done_probing = 0;
-
-static int pci_bus_map_create(devfs_handle_t xtalk);
-devfs_handle_t devfn_to_vertex(unsigned char busnum, unsigned int devfn);
-
-extern unsigned char Is_pic_on_this_nasid[512];
-
-extern void sn_init_irq_desc(void);
-
-
-/*
- * For the given device, initialize whether it is a PIC device.
- */
-static void
-set_isPIC(struct sn_device_sysdata *device_sysdata)
-{
- pciio_info_t pciio_info = pciio_info_get(device_sysdata->vhdl);
- pcibr_soft_t pcibr_soft = (pcibr_soft_t) pciio_info_mfast_get(pciio_info);
-
- device_sysdata->isPIC = IS_PIC_SOFT(pcibr_soft);;
-}
-
-/*
- * pci_bus_cvlink_init() - To be called once during initialization before
- * SGI IO Infrastructure init is called.
- */
-void
-pci_bus_cvlink_init(void)
-{
-
- extern void ioconfig_bus_init(void);
-
- memset(busnum_to_pcibr_vhdl, 0x0, sizeof(devfs_handle_t) * MAX_PCI_XWIDGET);
- memset(busnum_to_nid, 0x0, sizeof(nasid_t) * MAX_PCI_XWIDGET);
-
- memset(busnum_to_atedmamaps, 0x0, sizeof(void *) * MAX_PCI_XWIDGET);
-
- num_bridges = 0;
-
- // ioconfig_bus_init();
-}
-
-/*
- * pci_bus_to_vertex() - Given a logical Linux Bus Number returns the associated
- * pci bus vertex from the SGI IO Infrastructure.
- */
-devfs_handle_t
-pci_bus_to_vertex(unsigned char busnum)
-{
-
- devfs_handle_t pci_bus = NULL;
-
-
- /*
- * First get the xwidget vertex.
- */
- pci_bus = busnum_to_pcibr_vhdl[busnum];
- return(pci_bus);
-}
-
-/*
- * devfn_to_vertex() - returns the vertex of the device given the bus, slot,
- * and function numbers.
- */
-devfs_handle_t
-devfn_to_vertex(unsigned char busnum, unsigned int devfn)
-{
-
- int slot = 0;
- int func = 0;
- char name[16];
- devfs_handle_t pci_bus = NULL;
- devfs_handle_t device_vertex = (devfs_handle_t)NULL;
-
- /*
- * Go get the pci bus vertex.
- */
- pci_bus = pci_bus_to_vertex(busnum);
- if (!pci_bus) {
- /*
- * During probing, the Linux pci code invents non existant
- * bus numbers and pci_dev structures and tries to access
- * them to determine existance. Don't crib during probing.
- */
- if (done_probing)
- printk("devfn_to_vertex: Invalid bus number %d given.\n", busnum);
- return(NULL);
- }
-
-
- /*
- * Go get the slot&function vertex.
- * Should call pciio_slot_func_to_name() when ready.
- */
- slot = PCI_SLOT(devfn);
- func = PCI_FUNC(devfn);
-
- /*
- * For a NON Multi-function card the name of the device looks like:
- * ../pci/1, ../pci/2 ..
- */
- if (func == 0) {
- sprintf(name, "%d", slot);
- if (hwgraph_traverse(pci_bus, name, &device_vertex) ==
- GRAPH_SUCCESS) {
- if (device_vertex) {
- return(device_vertex);
- }
- }
- }
-
- /*
- * This maybe a multifunction card. It's names look like:
- * ../pci/1a, ../pci/1b, etc.
- */
- sprintf(name, "%d%c", slot, 'a'+func);
- if (hwgraph_traverse(pci_bus, name, &device_vertex) != GRAPH_SUCCESS) {
- if (!device_vertex) {
- return(NULL);
- }
- }
-
- return(device_vertex);
-}
-
-/*
- * For the given device, initialize the addresses for both the Device(x) Flush
- * Write Buffer register and the Xbow Flush Register for the port the PCI bus
- * is connected.
- */
-static void
-set_flush_addresses(struct pci_dev *device_dev,
- struct sn_device_sysdata *device_sysdata)
-{
- pciio_info_t pciio_info = pciio_info_get(device_sysdata->vhdl);
- pciio_slot_t pciio_slot = pciio_info_slot_get(pciio_info);
- pcibr_soft_t pcibr_soft = (pcibr_soft_t) pciio_info_mfast_get(pciio_info);
- bridge_t *bridge = pcibr_soft->bs_base;
- nasid_t nasid;
-
- /*
- * Get the nasid from the bridge.
- */
- nasid = NASID_GET(device_sysdata->dma_buf_sync);
- if (IS_PIC_DEVICE(device_dev)) {
- device_sysdata->dma_buf_sync = (volatile unsigned int *)
- &bridge->b_wr_req_buf[pciio_slot].reg;
- device_sysdata->xbow_buf_sync = (volatile unsigned int *)
- XBOW_PRIO_LINKREGS_PTR(NODE_SWIN_BASE(nasid, 0),
- pcibr_soft->bs_xid);
- } else {
- /*
- * Accessing Xbridge and Xbow register when SHUB swapoper is on!.
- */
- device_sysdata->dma_buf_sync = (volatile unsigned int *)
- ((uint64_t)&(bridge->b_wr_req_buf[pciio_slot].reg)^4);
- device_sysdata->xbow_buf_sync = (volatile unsigned int *)
- ((uint64_t)(XBOW_PRIO_LINKREGS_PTR(
- NODE_SWIN_BASE(nasid, 0), pcibr_soft->bs_xid)) ^ 4);
- }
-
-#ifdef DEBUG
- printk("set_flush_addresses: dma_buf_sync %p xbow_buf_sync %p\n",
- device_sysdata->dma_buf_sync, device_sysdata->xbow_buf_sync);
-
-printk("set_flush_addresses: dma_buf_sync\n");
- while((volatile unsigned int )*device_sysdata->dma_buf_sync);
-printk("set_flush_addresses: xbow_buf_sync\n");
- while((volatile unsigned int )*device_sysdata->xbow_buf_sync);
-#endif
-
-}
-
-/*
- * Most drivers currently do not properly tell the arch specific pci dma
- * interfaces whether they can handle A64. Here is where we privately
- * keep track of this.
- */
-static void __init
-set_sn_pci64(struct pci_dev *dev)
-{
- unsigned short vendor = dev->vendor;
- unsigned short device = dev->device;
-
- if (vendor == PCI_VENDOR_ID_QLOGIC) {
- if ((device == PCI_DEVICE_ID_QLOGIC_ISP2100) ||
- (device == PCI_DEVICE_ID_QLOGIC_ISP2200)) {
- SET_PCIA64(dev);
- return;
- }
- }
-
- if (vendor == PCI_VENDOR_ID_SGI) {
- if (device == PCI_DEVICE_ID_SGI_IOC3) {
- SET_PCIA64(dev);
- return;
- }
- }
-
-}
-
-/*
- * sn_pci_fixup() - This routine is called when platform_pci_fixup() is
- * invoked at the end of pcibios_init() to link the Linux pci
- * infrastructure to SGI IO Infrasturcture - ia64/kernel/pci.c
- *
- * Other platform specific fixup can also be done here.
- */
-void
-sn_pci_fixup(int arg)
-{
- struct list_head *ln;
- struct pci_bus *pci_bus = NULL;
- struct pci_dev *device_dev = NULL;
- struct sn_widget_sysdata *widget_sysdata;
- struct sn_device_sysdata *device_sysdata;
- pciio_intr_t intr_handle;
- int cpuid, bit;
- devfs_handle_t device_vertex;
- pciio_intr_line_t lines;
- extern void sn_pci_find_bios(void);
- extern int numnodes;
- int cnode;
- extern void io_sh_swapper(int, int);
-
- for (cnode = 0; cnode < numnodes; cnode++) {
- if ( !Is_pic_on_this_nasid[cnodeid_to_nasid(cnode)] )
- io_sh_swapper((cnodeid_to_nasid(cnode)), 0);
- }
-
- if (arg == 0) {
-#ifdef CONFIG_PROC_FS
- extern void register_sn_partition_id(void);
- extern void register_sn_serial_numbers(void);
-#endif
-
- sn_init_irq_desc();
- sn_pci_find_bios();
- for (cnode = 0; cnode < numnodes; cnode++) {
- extern void intr_init_vecblk(nodepda_t *npda, cnodeid_t, int);
- intr_init_vecblk(NODEPDA(cnode), cnode, 0);
- }
-
- /*
- * When we return to generic Linux, Swapper is always on ..
- */
- for (cnode = 0; cnode < numnodes; cnode++) {
- if ( !Is_pic_on_this_nasid[cnodeid_to_nasid(cnode)] )
- io_sh_swapper((cnodeid_to_nasid(cnode)), 1);
- }
-#ifdef CONFIG_PROC_FS
- register_sn_partition_id();
- register_sn_serial_numbers();
-#endif
- return;
- }
-
-
- done_probing = 1;
-
- /*
- * Initialize the pci bus vertex in the pci_bus struct.
- */
- for( ln = pci_root_buses.next; ln != &pci_root_buses; ln = ln->next) {
- pci_bus = pci_bus_b(ln);
- widget_sysdata = kmalloc(sizeof(struct sn_widget_sysdata),
- GFP_KERNEL);
- widget_sysdata->vhdl = pci_bus_to_vertex(pci_bus->number);
- pci_bus->sysdata = (void *)widget_sysdata;
- }
-
- /*
- * set the root start and end so that drivers calling check_region()
- * won't see a conflict
- */
- ioport_resource.start = 0xc000000000000000;
- ioport_resource.end = 0xcfffffffffffffff;
-
- /*
- * Set the root start and end for Mem Resource.
- */
- iomem_resource.start = 0;
- iomem_resource.end = 0xffffffffffffffff;
-
- /*
- * Initialize the device vertex in the pci_dev struct.
- */
- pci_for_each_dev(device_dev) {
- unsigned int irq;
- int idx;
- u16 cmd;
- devfs_handle_t vhdl;
- unsigned long size;
- extern int bit_pos_to_irq(int);
-
- if (device_dev->vendor == PCI_VENDOR_ID_SGI &&
- device_dev->device == PCI_DEVICE_ID_SGI_IOC3) {
- extern void pci_fixup_ioc3(struct pci_dev *d);
- pci_fixup_ioc3(device_dev);
- }
-
- /* Set the device vertex */
-
- device_sysdata = kmalloc(sizeof(struct sn_device_sysdata),
- GFP_KERNEL);
- device_sysdata->vhdl = devfn_to_vertex(device_dev->bus->number, device_dev->devfn);
- device_sysdata->isa64 = 0;
- /*
- * Set the xbridge Device(X) Write Buffer Flush and Xbow Flush
- * register addresses.
- */
- (void) set_flush_addresses(device_dev, device_sysdata);
-
- device_dev->sysdata = (void *) device_sysdata;
- set_sn_pci64(device_dev);
- set_isPIC(device_sysdata);
-
- pci_read_config_word(device_dev, PCI_COMMAND, &cmd);
-
- /*
- * Set the resources address correctly. The assumption here
- * is that the addresses in the resource structure has been
- * read from the card and it was set in the card by our
- * Infrastructure ..
- */
- vhdl = device_sysdata->vhdl;
- for (idx = 0; idx < PCI_ROM_RESOURCE; idx++) {
- size = 0;
- size = device_dev->resource[idx].end -
- device_dev->resource[idx].start;
- if (size) {
- device_dev->resource[idx].start = (unsigned long)pciio_pio_addr(vhdl, 0, PCIIO_SPACE_WIN(idx), 0, size, 0, (IS_PIC_DEVICE(device_dev)) ? 0 : PCIIO_BYTE_STREAM);
- device_dev->resource[idx].start |= __IA64_UNCACHED_OFFSET;
- }
- else
- continue;
-
- device_dev->resource[idx].end =
- device_dev->resource[idx].start + size;
-#ifdef BRINGUP2
- printk("Device Vendor 0x%x, resource[%d] PIO Address = 0x%lx\n", device_dev->vendor, idx, (long)device_dev->resource[idx].start);
-#endif
-
- if (device_dev->resource[idx].flags & IORESOURCE_IO)
- cmd |= PCI_COMMAND_IO;
-
- if (device_dev->resource[idx].flags & IORESOURCE_MEM)
- cmd |= PCI_COMMAND_MEMORY;
- }
- /*
- * Now handle the ROM resource ..
- */
-#if 0
- /*
- * Software WAR for a Software BUG.
- * This is only temporary.
- * See PV 872791
- */
- size = device_dev->resource[PCI_ROM_RESOURCE].end -
- device_dev->resource[PCI_ROM_RESOURCE].start;
-
- if (size) {
- device_dev->resource[PCI_ROM_RESOURCE].start =
- (unsigned long) pciio_pio_addr(vhdl, 0, PCIIO_SPACE_ROM, 0,
- size, 0, (IS_PIC_DEVICE(device_dev)) ? 0 : PCIIO_BYTE_STREAM);
- device_dev->resource[PCI_ROM_RESOURCE].start |= __IA64_UNCACHED_OFFSET;
- device_dev->resource[PCI_ROM_RESOURCE].end =
- device_dev->resource[PCI_ROM_RESOURCE].start + size;
- }
-#endif
-
- /*
- * Update the Command Word on the Card.
- */
- cmd |= PCI_COMMAND_MASTER; /* If the device doesn't support */
- /* bit gets dropped .. no harm */
- pci_write_config_word(device_dev, PCI_COMMAND, cmd);
-
- pci_read_config_byte(device_dev, PCI_INTERRUPT_PIN, (unsigned char *)&lines);
- if (device_dev->vendor == PCI_VENDOR_ID_SGI &&
- device_dev->device == PCI_DEVICE_ID_SGI_IOC3 ) {
- lines = 1;
- }
-
- device_sysdata = (struct sn_device_sysdata *)device_dev->sysdata;
- device_vertex = device_sysdata->vhdl;
-
- intr_handle = pciio_intr_alloc(device_vertex, NULL, lines, device_vertex);
-
- bit = intr_handle->pi_irq;
- cpuid = intr_handle->pi_cpu;
- irq = bit;
- irq = irq + (cpuid << 8);
- pciio_intr_connect(intr_handle, (intr_func_t)0, (intr_arg_t)0);
- device_dev->irq = irq;
-#ifdef ajmtestintr
- {
- int slot = PCI_SLOT(device_dev->devfn);
- static int timer_set = 0;
- pcibr_intr_t pcibr_intr = (pcibr_intr_t)intr_handle;
- pcibr_soft_t pcibr_soft = pcibr_intr->bi_soft;
- extern void intr_test_handle_intr(int, void*, struct pt_regs *);
-
- if (!timer_set) {
- intr_test_set_timer();
- timer_set = 1;
- }
- intr_test_register_irq(irq, pcibr_soft, slot);
- request_irq(irq, intr_test_handle_intr,0,NULL, NULL);
- }
-#endif
-
- }
-
- for (cnode = 0; cnode < numnodes; cnode++) {
- if ( !Is_pic_on_this_nasid[cnodeid_to_nasid(cnode)] )
- io_sh_swapper((cnodeid_to_nasid(cnode)), 1);
- }
-}
-
-/*
- * linux_bus_cvlink() Creates a link between the Linux PCI Bus number
- * to the actual hardware component that it represents:
- * /dev/hw/linux/busnum/0 -> ../../../hw/module/001c01/slab/0/Ibrick/xtalk/15/pci
- */
-void
-linux_bus_cvlink(void)
-{
- char name[8];
- int index;
-
- for (index=0; index < MAX_PCI_XWIDGET; index++) {
- if (!busnum_to_pcibr_vhdl[index])
- continue;
-
- sprintf(name, "%d", index);
- (void) hwgraph_edge_add(linux_busnum, busnum_to_pcibr_vhdl[index],
- name);
- }
-}
-
-/*
- * pci_bus_map_create() - Called by pci_bus_to_hcl_cvlink() to finish the job.
- *
- * Linux PCI Bus numbers are assigned from lowest module_id numbers
- * (rack/slot etc.) starting from HUB_WIDGET_ID_MAX down to
- * HUB_WIDGET_ID_MIN:
- * widgetnum 15 gets lower Bus Number than widgetnum 14 etc.
- *
- * Given 2 modules 001c01 and 001c02 we get the following mappings:
- * 001c01, widgetnum 15 = Bus number 0
- * 001c01, widgetnum 14 = Bus number 1
- * 001c02, widgetnum 15 = Bus number 3
- * 001c02, widgetnum 14 = Bus number 4
- * etc.
- *
- * The rational for starting Bus Number 0 with Widget number 15 is because
- * the system boot disks are always connected via Widget 15 Slot 0 of the
- * I-brick. Linux creates /dev/sd* devices(naming) strating from Bus Number 0
- * Therefore, /dev/sda1 will be the first disk, on Widget 15 of the lowest
- * module id(Master Cnode) of the system.
- *
- */
-static int
-pci_bus_map_create(devfs_handle_t xtalk)
-{
-
- devfs_handle_t master_node_vertex = NULL;
- devfs_handle_t xwidget = NULL;
- devfs_handle_t pci_bus = NULL;
- hubinfo_t hubinfo = NULL;
- xwidgetnum_t widgetnum;
- char pathname[128];
- graph_error_t rv;
- int bus;
-
- /*
- * Loop throught this vertex and get the Xwidgets ..
- */
-
-
- /* PCI devices */
-
- for (widgetnum = HUB_WIDGET_ID_MAX; widgetnum >= HUB_WIDGET_ID_MIN; widgetnum--) {
-
-#if 0
- {
- int pos;
- char dname[256];
- pos = devfs_generate_path(xtalk, dname, 256);
- printk("%s : path= %s\n", __FUNCTION__, &dname[pos]);
- }
-#endif
-
- sprintf(pathname, "%d", widgetnum);
- xwidget = NULL;
-
- /*
- * Example - /hw/module/001c16/Pbrick/xtalk/8 is the xwidget
- * /hw/module/001c16/Pbrick/xtalk/8/pci/1 is device
- */
- rv = hwgraph_traverse(xtalk, pathname, &xwidget);
- if ( (rv != GRAPH_SUCCESS) ) {
- if (!xwidget) {
- continue;
-}
- }
-
- sprintf(pathname, "%d/"EDGE_LBL_PCI, widgetnum);
- pci_bus = NULL;
- if (hwgraph_traverse(xtalk, pathname, &pci_bus) != GRAPH_SUCCESS)
- if (!pci_bus) {
- continue;
-}
-
- /*
- * Assign the correct bus number and also the nasid of this
- * pci Xwidget.
- *
- * Should not be any race here ...
- */
- num_bridges++;
- busnum_to_pcibr_vhdl[num_bridges - 1] = pci_bus;
-
- /*
- * Get the master node and from there get the NASID.
- */
- master_node_vertex = device_master_get(xwidget);
- if (!master_node_vertex) {
- printk("WARNING: pci_bus_map_create: Unable to get .master for vertex 0x%p\n", (void *)xwidget);
- }
-
- hubinfo_get(master_node_vertex, &hubinfo);
- if (!hubinfo) {
- printk("WARNING: pci_bus_map_create: Unable to get hubinfo for master node vertex 0x%p\n", (void *)master_node_vertex);
- return(1);
- } else {
- busnum_to_nid[num_bridges - 1] = hubinfo->h_nasid;
- }
-
- /*
- * Pre assign DMA maps needed for 32 Bits Page Map DMA.
- */
- busnum_to_atedmamaps[num_bridges - 1] = (void *) kmalloc(
- sizeof(struct sn_dma_maps_s) * MAX_ATE_MAPS, GFP_KERNEL);
- if (!busnum_to_atedmamaps[num_bridges - 1])
- printk("WARNING: pci_bus_map_create: Unable to precreate ATE DMA Maps for busnum %d vertex 0x%p\n", num_bridges - 1, (void *)xwidget);
-
- memset(busnum_to_atedmamaps[num_bridges - 1], 0x0,
- sizeof(struct sn_dma_maps_s) * MAX_ATE_MAPS);
-
- }
-
- /*
- * PCIX devices
- * We number busses differently for PCI-X devices.
- * We start from Lowest Widget on up ..
- */
-
- for (widgetnum = HUB_WIDGET_ID_MIN; widgetnum <= HUB_WIDGET_ID_MAX; widgetnum++) {
-
- /* Do both buses */
- for ( bus = 0; bus < 2; bus++ ) {
- sprintf(pathname, "%d", widgetnum);
- xwidget = NULL;
-
- /*
- * Example - /hw/module/001c16/Pbrick/xtalk/8 is the xwidget
- * /hw/module/001c16/Pbrick/xtalk/8/pci-x/0 is the bus
- * /hw/module/001c16/Pbrick/xtalk/8/pci-x/0/1 is device
- */
- rv = hwgraph_traverse(xtalk, pathname, &xwidget);
- if ( (rv != GRAPH_SUCCESS) ) {
- if (!xwidget) {
- continue;
- }
- }
-
- if ( bus == 0 )
- sprintf(pathname, "%d/"EDGE_LBL_PCIX_0, widgetnum);
- else
- sprintf(pathname, "%d/"EDGE_LBL_PCIX_1, widgetnum);
- pci_bus = NULL;
- if (hwgraph_traverse(xtalk, pathname, &pci_bus) != GRAPH_SUCCESS)
- if (!pci_bus) {
- continue;
- }
-
- /*
- * Assign the correct bus number and also the nasid of this
- * pci Xwidget.
- *
- * Should not be any race here ...
- */
- num_bridges++;
- busnum_to_pcibr_vhdl[num_bridges - 1] = pci_bus;
-
- /*
- * Get the master node and from there get the NASID.
- */
- master_node_vertex = device_master_get(xwidget);
- if (!master_node_vertex) {
- printk("WARNING: pci_bus_map_create: Unable to get .master for vertex 0x%p\n", (void *)xwidget);
- }
-
- hubinfo_get(master_node_vertex, &hubinfo);
- if (!hubinfo) {
- printk("WARNING: pci_bus_map_create: Unable to get hubinfo for master node vertex 0x%p\n", (void *)master_node_vertex);
- return(1);
- } else {
- busnum_to_nid[num_bridges - 1] = hubinfo->h_nasid;
- }
-
- /*
- * Pre assign DMA maps needed for 32 Bits Page Map DMA.
- */
- busnum_to_atedmamaps[num_bridges - 1] = (void *) kmalloc(
- sizeof(struct sn_dma_maps_s) * MAX_ATE_MAPS, GFP_KERNEL);
- if (!busnum_to_atedmamaps[num_bridges - 1])
- printk("WARNING: pci_bus_map_create: Unable to precreate ATE DMA Maps for busnum %d vertex 0x%p\n", num_bridges - 1, (void *)xwidget);
-
- memset(busnum_to_atedmamaps[num_bridges - 1], 0x0,
- sizeof(struct sn_dma_maps_s) * MAX_ATE_MAPS);
- }
- }
-
- return(0);
-}
-
-/*
- * pci_bus_to_hcl_cvlink() - This routine is called after SGI IO Infrastructure
- * initialization has completed to set up the mappings between Xbridge
- * and logical pci bus numbers. We also set up the NASID for each of these
- * xbridges.
- *
- * Must be called before pci_init() is invoked.
- */
-int
-pci_bus_to_hcl_cvlink(void)
-{
-
- devfs_handle_t devfs_hdl = NULL;
- devfs_handle_t xtalk = NULL;
- int rv = 0;
- char name[256];
- char tmp_name[256];
- int master_iobrick;
- slabid_t master_slab;
- int i, ii;
- extern nasid_t master_baseio_nasid;
- extern nasid_t get_master_baseio_nasid(void);
-
- /*
- * Iterate throught each xtalk links in the system ..
- * /hw/module/001c01/slab/0/node/xtalk/ 8|9|10|11|12|13|14|15
- *
- * /hw/module/001c01/slab/0/node/xtalk/15 -> /hw/module/001c01/slab/0/Ibrick/xtalk/15
- *
- * What if it is not pci?
- */
- devfs_hdl = hwgraph_path_to_vertex("/dev/hw/module");
-
- /*
- * To provide consistent(not persistent) device naming, we need to start
- * bus number allocation from the C-Brick with the lowest module id e.g. 001c01
- * with an attached I-Brick. Find the master_iobrick.
- */
- master_baseio_nasid = get_master_baseio_nasid();
- master_iobrick = -1;
- master_slab = -1;
- if ( master_baseio_nasid >= 0 ) {
- /* Valid nasid, need the slab ID */
- for (i = 0; i < nummodules; i++) {
- extern int iobrick_module_get_nasid(nasid_t);
- moduleid_t iobrick_id;
- nasid_t nasid = -1;
- int n = 0;
- for ( n = 0; n < modules[i]->nodecnt; n++ ) {
- nasid = cnodeid_to_nasid(modules[i]->nodes[n]);
- iobrick_id = iobrick_module_get_nasid(nasid);
- if (iobrick_id > 0) { /* Valid module id */
- if ( master_baseio_nasid == nasid ) {
- master_iobrick = i;
- master_slab = geo_slab(modules[i]->geoid[n]);
- printk("pci_bus_to_hcl_cvlink: Found Master Base IO Brick type %d Master Base I/O nasid %d Master Cbrick Index %d Slab %d\n", MODULE_GET_BTYPE(iobrick_id), master_baseio_nasid, master_iobrick, master_slab);
- break;
- }
- }
- }
- if (master_slab >= 0)
- break;
- }
- }
- else {
- /* Not sure which nasid it is - call failed, so make a guess */
- for (i = 0; i < nummodules; i++) {
- extern int iobrick_module_get_nasid(nasid_t);
- moduleid_t iobrick_id;
- nasid_t nasid = -1;
- int n = 0;
- for ( n = 0; n < modules[i]->nodecnt; n++ ) {
- nasid = cnodeid_to_nasid(modules[i]->nodes[n]);
- iobrick_id = iobrick_module_get_nasid(nasid);
- if (iobrick_id > 0) { /* Valid module id */
- if ( (MODULE_GET_BTYPE(iobrick_id) == MODULE_IBRICK) ||
- (MODULE_GET_BTYPE(iobrick_id) == MODULE_PXBRICK) ||
- (MODULE_GET_BTYPE(iobrick_id) == MODULE_PBRICK) ) {
- master_iobrick = i;
- master_baseio_nasid = nasid;
- master_slab = geo_slab(modules[i]->geoid[n]);
- printk("pci_bus_to_hcl_cvlink: Found Master Base IO Brick type %d Master Cbrick Index %d Slab %d\n", MODULE_GET_BTYPE(iobrick_id), master_iobrick, master_slab);
- break;
- }
- }
- }
- if (master_iobrick >= 0)
- break;
- }
- }
-
- if (master_iobrick == -1) {
- panic("Unable to find the Master BaseIO PCI/PCIX Bus\n");
- }
-
- /*
- * The master_iobrick gets bus 0 and 1.
- */
- if (master_iobrick >= 0) {
- memset(name, 0, 256);
- memset(tmp_name, 0, 256);
- format_module_id(name, modules[master_iobrick]->id, MODULE_FORMAT_BRIEF);
- sprintf(tmp_name, "/slab/%d/node/xtalk", master_slab);
- strcat(name, tmp_name);
- xtalk = NULL;
- rv = hwgraph_edge_get(devfs_hdl, name, &xtalk);
- pci_bus_map_create(xtalk);
- }
-
- /*
- * Now go do the rest of the modules, starting from the C-Brick with the lowest
- * module id, remembering to skip the master_iobrick, which was done above.
- */
- for (i = 0; i < nummodules ; i++) {
- for ( ii = 0; ii < MAX_SLABS; ii++ ) {
- if ((i == master_iobrick) && (master_slab == ii))
- continue; /* Did the master_iobrick/slab already. */
- memset(name, 0, 256);
- memset(tmp_name, 0, 256);
- format_module_id(name, modules[i]->id, MODULE_FORMAT_BRIEF);
- sprintf(tmp_name, "/slab/%d/node/xtalk", ii);
- strcat(name, tmp_name);
- xtalk = NULL;
- rv = hwgraph_edge_get(devfs_hdl, name, &xtalk);
- pci_bus_map_create(xtalk);
- }
- }
-
- /*
- * Create the Linux PCI bus number vertex link.
- */
- (void)linux_bus_cvlink();
-
- return(0);
-}
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)