commit 480787e5be113fba0207addd3c6befabd4532ff3 Author: Sasha Levin Date: Tue Jun 30 16:26:28 2020 -0400 Linux 4.4.229 Signed-off-by: Sasha Levin commit d9ed57ecc2947abcf5a8226b34e0634a8fe77692 Author: Takashi Iwai Date: Thu Aug 15 11:41:06 2019 +0200 ALSA: usb-audio: Fix invalid NULL check in snd_emuusb_set_samplerate() commit 6de3c9e3f6b3eaf66859e1379b3f35dda781416b upstream. The quirk function snd_emuusb_set_samplerate() has a NULL check for the mixer element, but this is useless in the current code. It used to be a check against mixer->id_elems[unitid] but it was changed later to the value after mixer_eleme_list_to_info() which is always non-NULL due to the container_of() usage. This patch fixes the check before the conversion. While we're at it, correct a typo in the comment in the function, too. Fixes: 8c558076c740 ("ALSA: usb-audio: Clean up mixer element list traverse") Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 7f9d01a3dac7a5b9ef2b80d1c7049c25743cd661 Author: Dongdong Liu Date: Thu Dec 28 17:53:32 2017 +0800 PCI: Disable MSI for HiSilicon Hip06/Hip07 only in Root Port mode commit deb86999323661c019ef2740eb9d479d1e526b5c upstream. HiSilicon Hip06/Hip07 can operate as either a Root Port or an Endpoint. It always advertises an MSI capability, but it can only generate MSIs when in Endpoint mode. The device has the same Vendor and Device IDs in both modes, so check the Class Code and disable MSI only when operating as a Root Port. [bhelgaas: changelog] Fixes: 72f2ff0deb87 ("PCI: Disable MSI for HiSilicon Hip06/Hip07 Root Ports") Signed-off-by: Dongdong Liu Signed-off-by: Bjorn Helgaas Reviewed-by: Zhou Wang Cc: stable@vger.kernel.org # v4.11+ Signed-off-by: Greg Kroah-Hartman commit cff6b73198f864e12d8fcf90ad26ddc12cfece3f Author: Olga Kornievskaia Date: Wed Jun 24 13:54:08 2020 -0400 NFSv4 fix CLOSE not waiting for direct IO compeletion commit d03727b248d0dae6199569a8d7b629a681154633 upstream. Figuring out the root case for the REMOVE/CLOSE race and suggesting the solution was done by Neil Brown. Currently what happens is that direct IO calls hold a reference on the open context which is decremented as an asynchronous task in the nfs_direct_complete(). Before reference is decremented, control is returned to the application which is free to close the file. When close is being processed, it decrements its reference on the open_context but since directIO still holds one, it doesn't sent a close on the wire. It returns control to the application which is free to do other operations. For instance, it can delete a file. Direct IO is finally releasing its reference and triggering an asynchronous close. Which races with the REMOVE. On the server, REMOVE can be processed before the CLOSE, failing the REMOVE with EACCES as the file is still opened. Signed-off-by: Olga Kornievskaia Suggested-by: Neil Brown CC: stable@vger.kernel.org Signed-off-by: Anna Schumaker Signed-off-by: Greg Kroah-Hartman commit 6791042e833cbaf1de5159140c56d7efb495de8f Author: Trond Myklebust Date: Mon Jun 22 15:04:15 2020 -0400 pNFS/flexfiles: Fix list corruption if the mirror count changes commit 8b04013737341442ed914b336cde866b902664ae upstream. If the mirror count changes in the new layout we pick up inside ff_layout_pg_init_write(), then we can end up adding the request to the wrong mirror and corrupting the mirror->pg_list. Fixes: d600ad1f2bdb ("NFS41: pop some layoutget errors to application") Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker Signed-off-by: Greg Kroah-Hartman commit 8deec224e90e09613a43e00124b719b26349714d Author: Chuck Lever Date: Thu Jun 25 11:32:34 2020 -0400 SUNRPC: Properly set the @subbuf parameter of xdr_buf_subsegment() commit 89a3c9f5b9f0bcaa9aea3e8b2a616fcaea9aad78 upstream. @subbuf is an output parameter of xdr_buf_subsegment(). A survey of call sites shows that @subbuf is always uninitialized before xdr_buf_segment() is invoked by callers. There are some execution paths through xdr_buf_subsegment() that do not set all of the fields in @subbuf, leaving some pointer fields containing garbage addresses. Subsequent processing of that buffer then results in a page fault. Signed-off-by: Chuck Lever Cc: Signed-off-by: Anna Schumaker Signed-off-by: Greg Kroah-Hartman commit d6f775f682e255b278868f11e806e6681de506cd Author: Vasily Averin Date: Mon Jun 1 11:54:57 2020 +0300 sunrpc: fixed rollback in rpc_gssd_dummy_populate() commit b7ade38165ca0001c5a3bd5314a314abbbfbb1b7 upstream. __rpc_depopulate(gssd_dentry) was lost on error path cc: stable@vger.kernel.org Fixes: commit 4b9a445e3eeb ("sunrpc: create a new dummy pipe for gssd to hold open") Signed-off-by: Vasily Averin Reviewed-by: Jeff Layton Signed-off-by: Anna Schumaker Signed-off-by: Greg Kroah-Hartman commit 5904c239c037c33b8b378da9f5484ccb8e241948 Author: Denis Efremov Date: Mon Jun 22 23:31:22 2020 +0300 drm/radeon: fix fb_div check in ni_init_smc_spll_table() commit 35f760b44b1b9cb16a306bdcc7220fbbf78c4789 upstream. clk_s is checked twice in a row in ni_init_smc_spll_table(). fb_div should be checked instead. Fixes: 69e0b57a91ad ("drm/radeon/kms: add dpm support for cayman (v5)") Cc: stable@vger.kernel.org Signed-off-by: Denis Efremov Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman commit ddb10a15bebe9039ab4b051df02bcb634cf776cb Author: Masami Hiramatsu Date: Sat Jun 20 12:46:03 2020 +0900 tracing: Fix event trigger to accept redundant spaces commit 6784beada631800f2c5afd567e5628c843362cee upstream. Fix the event trigger to accept redundant spaces in the trigger input. For example, these return -EINVAL echo " traceon" > events/ftrace/print/trigger echo "traceon if common_pid == 0" > events/ftrace/print/trigger echo "disable_event:kmem:kmalloc " > events/ftrace/print/trigger But these are hard to find what is wrong. To fix this issue, use skip_spaces() to remove spaces in front of actual tokens, and set NULL if there is no token. Link: http://lkml.kernel.org/r/159262476352.185015.5261566783045364186.stgit@devnote2 Cc: Tom Zanussi Cc: stable@vger.kernel.org Fixes: 85f2b08268c0 ("tracing: Add basic event trigger framework") Reviewed-by: Tom Zanussi Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman commit 50e22de32adfc0377749fe412a130bb37701061c Author: Jiping Ma Date: Mon May 11 10:52:07 2020 +0800 arm64: perf: Report the PC value in REGS_ABI_32 mode commit 8dfe804a4031ca6ba3a3efb2048534249b64f3a5 upstream. A 32-bit perf querying the registers of a compat task using REGS_ABI_32 will receive zeroes from w15, when it expects to find the PC. Return the PC value for register dwarf register 15 when returning register values for a compat task to perf. Cc: Acked-by: Mark Rutland Signed-off-by: Jiping Ma Link: https://lore.kernel.org/r/1589165527-188401-1-git-send-email-jiping.ma2@windriver.com [will: Shuffled code and added a comment] Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman commit 12a758a770a2bc43f51e59c23cd793b1491fbc1c Author: Junxiao Bi Date: Thu Jun 25 20:29:37 2020 -0700 ocfs2: fix panic on nfs server over ocfs2 commit e5a15e17a78d58f933d17cafedfcf7486a29f5b4 upstream. The following kernel panic was captured when running nfs server over ocfs2, at that time ocfs2_test_inode_bit() was checking whether one inode locating at "blkno" 5 was valid, that is ocfs2 root inode, its "suballoc_slot" was OCFS2_INVALID_SLOT(65535) and it was allocted from //global_inode_alloc, but here it wrongly assumed that it was got from per slot inode alloctor which would cause array overflow and trigger kernel panic. BUG: unable to handle kernel paging request at 0000000000001088 IP: [] _raw_spin_lock+0x18/0xf0 PGD 1e06ba067 PUD 1e9e7d067 PMD 0 Oops: 0002 [#1] SMP CPU: 6 PID: 24873 Comm: nfsd Not tainted 4.1.12-124.36.1.el6uek.x86_64 #2 Hardware name: Huawei CH121 V3/IT11SGCA1, BIOS 3.87 02/02/2018 RIP: _raw_spin_lock+0x18/0xf0 RSP: e02b:ffff88005ae97908 EFLAGS: 00010206 RAX: ffff88005ae98000 RBX: 0000000000001088 RCX: 0000000000000000 RDX: 0000000000020000 RSI: 0000000000000009 RDI: 0000000000001088 RBP: ffff88005ae97928 R08: 0000000000000000 R09: ffff880212878e00 R10: 0000000000007ff0 R11: 0000000000000000 R12: 0000000000001088 R13: ffff8800063c0aa8 R14: ffff8800650c27d0 R15: 000000000000ffff FS: 0000000000000000(0000) GS:ffff880218180000(0000) knlGS:ffff880218180000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000001088 CR3: 00000002033d0000 CR4: 0000000000042660 Call Trace: igrab+0x1e/0x60 ocfs2_get_system_file_inode+0x63/0x3a0 [ocfs2] ocfs2_test_inode_bit+0x328/0xa00 [ocfs2] ocfs2_get_parent+0xba/0x3e0 [ocfs2] reconnect_path+0xb5/0x300 exportfs_decode_fh+0xf6/0x2b0 fh_verify+0x350/0x660 [nfsd] nfsd4_putfh+0x4d/0x60 [nfsd] nfsd4_proc_compound+0x3d3/0x6f0 [nfsd] nfsd_dispatch+0xe0/0x290 [nfsd] svc_process_common+0x412/0x6a0 [sunrpc] svc_process+0x123/0x210 [sunrpc] nfsd+0xff/0x170 [nfsd] kthread+0xcb/0xf0 ret_from_fork+0x61/0x90 Code: 83 c2 02 0f b7 f2 e8 18 dc 91 ff 66 90 eb bf 0f 1f 40 00 55 48 89 e5 41 56 41 55 41 54 53 0f 1f 44 00 00 48 89 fb ba 00 00 02 00 0f c1 17 89 d0 45 31 e4 45 31 ed c1 e8 10 66 39 d0 41 89 c6 RIP _raw_spin_lock+0x18/0xf0 CR2: 0000000000001088 ---[ end trace 7264463cd1aac8f9 ]--- Kernel panic - not syncing: Fatal exception Link: http://lkml.kernel.org/r/20200616183829.87211-4-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi Reviewed-by: Joseph Qi Cc: Changwei Ge Cc: Gang He Cc: Joel Becker Cc: Jun Piao Cc: Mark Fasheh Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 1e0e46e511c4bee2046b720a2ace97aae5458848 Author: Junxiao Bi Date: Thu Jun 25 20:29:40 2020 -0700 ocfs2: fix value of OCFS2_INVALID_SLOT commit 9277f8334ffc719fe922d776444d6e4e884dbf30 upstream. In the ocfs2 disk layout, slot number is 16 bits, but in ocfs2 implementation, slot number is 32 bits. Usually this will not cause any issue, because slot number is converted from u16 to u32, but OCFS2_INVALID_SLOT was defined as -1, when an invalid slot number from disk was obtained, its value was (u16)-1, and it was converted to u32. Then the following checking in get_local_system_inode will be always skipped: static struct inode **get_local_system_inode(struct ocfs2_super *osb, int type, u32 slot) { BUG_ON(slot == OCFS2_INVALID_SLOT); ... } Link: http://lkml.kernel.org/r/20200616183829.87211-5-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Changwei Ge Cc: Gang He Cc: Jun Piao Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit aaba67dff58ef4a2de912a1db96f97cdb5032afb Author: Junxiao Bi Date: Thu Jun 25 20:29:33 2020 -0700 ocfs2: load global_inode_alloc commit 7569d3c754e452769a5747eeeba488179e38a5da upstream. Set global_inode_alloc as OCFS2_FIRST_ONLINE_SYSTEM_INODE, that will make it load during mount. It can be used to test whether some global/system inodes are valid. One use case is that nfsd will test whether root inode is valid. Link: http://lkml.kernel.org/r/20200616183829.87211-3-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi Reviewed-by: Joseph Qi Cc: Changwei Ge Cc: Gang He Cc: Joel Becker Cc: Jun Piao Cc: Mark Fasheh Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 97d501d149ea2a605ffe4a21a03e607f015b2ccc Author: Waiman Long Date: Thu Jun 25 20:29:52 2020 -0700 mm/slab: use memzero_explicit() in kzfree() commit 8982ae527fbef170ef298650c15d55a9ccd33973 upstream. The kzfree() function is normally used to clear some sensitive information, like encryption keys, in the buffer before freeing it back to the pool. Memset() is currently used for buffer clearing. However unlikely, there is still a non-zero probability that the compiler may choose to optimize away the memory clearing especially if LTO is being used in the future. To make sure that this optimization will never happen, memzero_explicit(), which is introduced in v3.18, is now used in kzfree() to future-proof it. Link: http://lkml.kernel.org/r/20200616154311.12314-2-longman@redhat.com Fixes: 3ef0e5ba4673 ("slab: introduce kzfree()") Signed-off-by: Waiman Long Acked-by: Michal Hocko Cc: David Howells Cc: Jarkko Sakkinen Cc: James Morris Cc: "Serge E. Hallyn" Cc: Joe Perches Cc: Matthew Wilcox Cc: David Rientjes Cc: Johannes Weiner Cc: Dan Carpenter Cc: "Jason A . Donenfeld" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 8807fbfcd94cf79ee9a6f99bef31ec577a5a97d5 Author: Xiaoyao Li Date: Tue Jun 16 15:33:07 2020 +0800 KVM: X86: Fix MSR range of APIC registers in X2APIC mode commit bf10bd0be53282183f374af23577b18b5fbf7801 upstream. Only MSR address range 0x800 through 0x8ff is architecturally reserved and dedicated for accessing APIC registers in x2APIC mode. Fixes: 0105d1a52640 ("KVM: x2apic interface to lapic") Signed-off-by: Xiaoyao Li Message-Id: <20200616073307.16440-1-xiaoyao.li@intel.com> Cc: stable@vger.kernel.org Reviewed-by: Sean Christopherson Reviewed-by: Jim Mattson Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit 2aaf2d30cca0daf1882bc3f70472db61445655c4 Author: Nathan Chancellor Date: Thu Jun 11 21:51:50 2020 -0700 ACPI: sysfs: Fix pm_profile_attr type commit e6d701dca9893990d999fd145e3e07223c002b06 upstream. When running a kernel with Clang's Control Flow Integrity implemented, there is a violation that happens when accessing /sys/firmware/acpi/pm_profile: $ cat /sys/firmware/acpi/pm_profile 0 $ dmesg ... [ 17.352564] ------------[ cut here ]------------ [ 17.352568] CFI failure (target: acpi_show_profile+0x0/0x8): [ 17.352572] WARNING: CPU: 3 PID: 497 at kernel/cfi.c:29 __cfi_check_fail+0x33/0x40 [ 17.352573] Modules linked in: [ 17.352575] CPU: 3 PID: 497 Comm: cat Tainted: G W 5.7.0-microsoft-standard+ #1 [ 17.352576] RIP: 0010:__cfi_check_fail+0x33/0x40 [ 17.352577] Code: 48 c7 c7 50 b3 85 84 48 c7 c6 50 0a 4e 84 e8 a4 d8 60 00 85 c0 75 02 5b c3 48 c7 c7 dc 5e 49 84 48 89 de 31 c0 e8 7d 06 eb ff <0f> 0b 5b c3 00 00 cc cc 00 00 cc cc 00 85 f6 74 25 41 b9 ea ff ff [ 17.352577] RSP: 0018:ffffaa6dc3c53d30 EFLAGS: 00010246 [ 17.352578] RAX: 331267e0c06cee00 RBX: ffffffff83d85890 RCX: ffffffff8483a6f8 [ 17.352579] RDX: ffff9cceabbb37c0 RSI: 0000000000000082 RDI: ffffffff84bb9e1c [ 17.352579] RBP: ffffffff845b2bc8 R08: 0000000000000001 R09: ffff9cceabbba200 [ 17.352579] R10: 000000000000019d R11: 0000000000000000 R12: ffff9cc947766f00 [ 17.352580] R13: ffffffff83d6bd50 R14: ffff9ccc6fa80000 R15: ffffffff845bd328 [ 17.352582] FS: 00007fdbc8d13580(0000) GS:ffff9cce91ac0000(0000) knlGS:0000000000000000 [ 17.352582] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 17.352583] CR2: 00007fdbc858e000 CR3: 00000005174d0000 CR4: 0000000000340ea0 [ 17.352584] Call Trace: [ 17.352586] ? rev_id_show+0x8/0x8 [ 17.352587] ? __cfi_check+0x45bac/0x4b640 [ 17.352589] ? kobj_attr_show+0x73/0x80 [ 17.352590] ? sysfs_kf_seq_show+0xc1/0x140 [ 17.352592] ? ext4_seq_options_show.cfi_jt+0x8/0x8 [ 17.352593] ? seq_read+0x180/0x600 [ 17.352595] ? sysfs_create_file_ns.cfi_jt+0x10/0x10 [ 17.352596] ? tlbflush_read_file+0x8/0x8 [ 17.352597] ? __vfs_read+0x6b/0x220 [ 17.352598] ? handle_mm_fault+0xa23/0x11b0 [ 17.352599] ? vfs_read+0xa2/0x130 [ 17.352599] ? ksys_read+0x6a/0xd0 [ 17.352601] ? __do_sys_getpgrp+0x8/0x8 [ 17.352602] ? do_syscall_64+0x72/0x120 [ 17.352603] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 17.352604] ---[ end trace 7b1fa81dc897e419 ]--- When /sys/firmware/acpi/pm_profile is read, sysfs_kf_seq_show is called, which in turn calls kobj_attr_show, which gets the ->show callback member by calling container_of on attr (casting it to struct kobj_attribute) then calls it. There is a CFI violation because pm_profile_attr is of type struct device_attribute but kobj_attr_show calls ->show expecting it to be from struct kobj_attribute. CFI checking ensures that function pointer types match when doing indirect calls. Fix pm_profile_attr to be defined in terms of kobj_attribute so there is no violation or mismatch. Fixes: 362b646062b2 ("ACPI: Export FADT pm_profile integer value to userspace") Link: https://github.com/ClangBuiltLinux/linux/issues/1051 Reported-by: yuu ichii Signed-off-by: Nathan Chancellor Cc: 3.10+ # 3.10+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit 157dafb4a734ce030077dce5f01c9e19277ab07c Author: Luis Chamberlain Date: Fri Jun 5 16:58:36 2020 +0200 blktrace: break out of blktrace setup on concurrent calls [ Upstream commit 1b0b283648163dae2a214ca28ed5a99f62a77319 ] We use one blktrace per request_queue, that means one per the entire disk. So we cannot run one blktrace on say /dev/vda and then /dev/vda1, or just two calls on /dev/vda. We check for concurrent setup only at the very end of the blktrace setup though. If we try to run two concurrent blktraces on the same block device the second one will fail, and the first one seems to go on. However when one tries to kill the first one one will see things like this: The kernel will show these: ``` debugfs: File 'dropped' in directory 'nvme1n1' already present! debugfs: File 'msg' in directory 'nvme1n1' already present! debugfs: File 'trace0' in directory 'nvme1n1' already present! `` And userspace just sees this error message for the second call: ``` blktrace /dev/nvme1n1 BLKTRACESETUP(2) /dev/nvme1n1 failed: 5/Input/output error ``` The first userspace process #1 will also claim that the files were taken underneath their nose as well. The files are taken away form the first process given that when the second blktrace fails, it will follow up with a BLKTRACESTOP and BLKTRACETEARDOWN. This means that even if go-happy process #1 is waiting for blktrace data, we *have* been asked to take teardown the blktrace. This can easily be reproduced with break-blktrace [0] run_0005.sh test. Just break out early if we know we're already going to fail, this will prevent trying to create the files all over again, which we know still exist. [0] https://github.com/mcgrof/break-blktrace Signed-off-by: Luis Chamberlain Signed-off-by: Jan Kara Reviewed-by: Bart Van Assche Reviewed-by: Christoph Hellwig Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit ea4f911f9c1ab2d8a37af68e18f0de2988b89d26 Author: Masahiro Yamada Date: Sun Jun 14 23:43:40 2020 +0900 kbuild: improve cc-option to clean up all temporary files [ Upstream commit f2f02ebd8f3833626642688b2d2c6a7b3c141fa9 ] When cc-option and friends evaluate compiler flags, the temporary file $$TMP is created as an output object, and automatically cleaned up. The actual file path of $$TMP is ..tmp, here is the process ID of $(shell ...) invoked from cc-option. (Please note $$$$ is the escape sequence of $$). Such garbage files are cleaned up in most cases, but some compiler flags create additional output files. For example, -gsplit-dwarf creates a .dwo file. When CONFIG_DEBUG_INFO_SPLIT=y, you will see a bunch of ..dwo files left in the top of build directories. You may not notice them unless you do 'ls -a', but the garbage files will increase every time you run 'make'. This commit changes the temporary object path to .tmp_/tmp, and removes .tmp_ directory when exiting. Separate build artifacts such as *.dwo will be cleaned up all together because their file paths are usually determined based on the base name of the object. Another example is -ftest-coverage, which outputs the coverage data into .gcno Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin commit 120736d175d2b339f1cdb98577ee09be89356275 Author: Zekun Shen Date: Mon Jun 15 11:50:29 2020 -0400 net: alx: fix race condition in alx_remove [ Upstream commit e89df5c4322c1bf495f62d74745895b5fd2a4393 ] There is a race condition exist during termination. The path is alx_stop and then alx_remove. An alx_schedule_link_check could be called before alx_stop by interrupt handler and invoke alx_link_check later. Alx_stop frees the napis, and alx_remove cancels any pending works. If any of the work is scheduled before termination and invoked before alx_remove, a null-ptr-deref occurs because both expect alx->napis[i]. This patch fix the race condition by moving cancel_work_sync functions before alx_free_napis inside alx_stop. Because interrupt handler can call alx_schedule_link_check again, alx_free_irq is moved before cancel_work_sync calls too. Signed-off-by: Zekun Shen Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 00a95b481eba7e5d98a34b9a66ac141d6439969c Author: Juri Lelli Date: Mon Nov 19 16:32:01 2018 +0100 sched/core: Fix PI boosting between RT and DEADLINE tasks [ Upstream commit 740797ce3a124b7dd22b7fb832d87bc8fba1cf6f ] syzbot reported the following warning: WARNING: CPU: 1 PID: 6351 at kernel/sched/deadline.c:628 enqueue_task_dl+0x22da/0x38a0 kernel/sched/deadline.c:1504 At deadline.c:628 we have: 623 static inline void setup_new_dl_entity(struct sched_dl_entity *dl_se) 624 { 625 struct dl_rq *dl_rq = dl_rq_of_se(dl_se); 626 struct rq *rq = rq_of_dl_rq(dl_rq); 627 628 WARN_ON(dl_se->dl_boosted); 629 WARN_ON(dl_time_before(rq_clock(rq), dl_se->deadline)); [...] } Which means that setup_new_dl_entity() has been called on a task currently boosted. This shouldn't happen though, as setup_new_dl_entity() is only called when the 'dynamic' deadline of the new entity is in the past w.r.t. rq_clock and boosted tasks shouldn't verify this condition. Digging through the PI code I noticed that what above might in fact happen if an RT tasks blocks on an rt_mutex hold by a DEADLINE task. In the first branch of boosting conditions we check only if a pi_task 'dynamic' deadline is earlier than mutex holder's and in this case we set mutex holder to be dl_boosted. However, since RT 'dynamic' deadlines are only initialized if such tasks get boosted at some point (or if they become DEADLINE of course), in general RT 'dynamic' deadlines are usually equal to 0 and this verifies the aforementioned condition. Fix it by checking that the potential donor task is actually (even if temporary because in turn boosted) running at DEADLINE priority before using its 'dynamic' deadline value. Fixes: 2d3d891d3344 ("sched/deadline: Add SCHED_DEADLINE inheritance logic") Reported-by: syzbot+119ba87189432ead09b4@syzkaller.appspotmail.com Signed-off-by: Juri Lelli Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Ingo Molnar Reviewed-by: Daniel Bristot de Oliveira Tested-by: Daniel Wagner Link: https://lkml.kernel.org/r/20181119153201.GB2119@localhost.localdomain Signed-off-by: Sasha Levin commit 8487115b6e0fc709c584c5e987450388e65fa4ff Author: Russell King Date: Wed Jun 10 21:51:11 2020 +0100 netfilter: ipset: fix unaligned atomic access [ Upstream commit 715028460082d07a7ec6fcd87b14b46784346a72 ] When using ip_set with counters and comment, traffic causes the kernel to panic on 32-bit ARM: Alignment trap: not handling instruction e1b82f9f at [] Unhandled fault: alignment exception (0x221) at 0xea08133c PC is at ip_set_match_extensions+0xe0/0x224 [ip_set] The problem occurs when we try to update the 64-bit counters - the faulting address above is not 64-bit aligned. The problem occurs due to the way elements are allocated, for example: set->dsize = ip_set_elem_len(set, tb, 0, 0); map = ip_set_alloc(sizeof(*map) + elements * set->dsize); If the element has a requirement for a member to be 64-bit aligned, and set->dsize is not a multiple of 8, but is a multiple of four, then every odd numbered elements will be misaligned - and hitting an atomic64_add() on that element will cause the kernel to panic. ip_set_elem_len() must return a size that is rounded to the maximum alignment of any extension field stored in the element. This change ensures that is the case. Fixes: 95ad1f4a9358 ("netfilter: ipset: Fix extension alignment") Signed-off-by: Russell King Acked-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit ea8532dd6fb6befe355d027fe51cc8d560fa1bce Author: Dan Carpenter Date: Mon Jun 15 14:27:19 2020 +0300 usb: gadget: udc: Potential Oops in error handling code [ Upstream commit e55f3c37cb8d31c7e301f46396b2ac6a19eb3a7c ] If this is in "transceiver" mode the the ->qwork isn't required and is a NULL pointer. This can lead to a NULL dereference when we call destroy_workqueue(udc->qwork). Fixes: 3517c31a8ece ("usb: gadget: mv_udc: use devm_xxx for probe") Signed-off-by: Dan Carpenter Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin commit fb0b63ed4084d97fce4355f2b86174136505944a Author: yu kuai Date: Thu Jun 4 20:42:06 2020 +0800 ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram() [ Upstream commit 586745f1598ccf71b0a5a6df2222dee0a865954e ] if of_find_device_by_node() succeed, imx_suspend_alloc_ocram() doesn't have a corresponding put_device(). Thus add a jump target to fix the exception handling for this function implementation. Fixes: 1579c7b9fe01 ("ARM: imx53: Set DDR pins to high impedance when in suspend to RAM.") Signed-off-by: yu kuai Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin commit 55344d5fdac029410ab0c1d947c905983bf47ad8 Author: Fan Guo Date: Fri Jun 12 14:38:24 2020 +0800 RDMA/mad: Fix possible memory leak in ib_mad_post_receive_mads() [ Upstream commit a17f4bed811c60712d8131883cdba11a105d0161 ] If ib_dma_mapping_error() returns non-zero value, ib_mad_post_receive_mads() will jump out of loops and return -ENOMEM without freeing mad_priv. Fix this memory-leak problem by freeing mad_priv in this case. Fixes: 2c34e68f4261 ("IB/mad: Check and handle potential DMA mapping errors") Link: https://lore.kernel.org/r/20200612063824.180611-1-guofan5@huawei.com Signed-off-by: Fan Guo Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit 8da5b2305f6244184f0debde4ff3029788f27228 Author: Qiushi Wu Date: Thu May 28 13:38:04 2020 -0500 efi/esrt: Fix reference count leak in esre_create_sysfs_entry. [ Upstream commit 4ddf4739be6e375116c375f0a68bf3893ffcee21 ] kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Previous commit "b8eb718348b8" fixed a similar problem. Fixes: 0bb549052d33 ("efi: Add esrt support") Signed-off-by: Qiushi Wu Link: https://lore.kernel.org/r/20200528183804.4497-1-wu000273@umn.edu Signed-off-by: Ard Biesheuvel Signed-off-by: Sasha Levin commit d1633159b6c8a1fe0b7e5a635738796e2d93de6e Author: Zhang Xiaoxu Date: Tue Jun 23 07:31:54 2020 -0400 cifs/smb3: Fix data inconsistent when zero file range [ Upstream commit 6b69040247e14b43419a520f841f2b3052833df9 ] CIFS implements the fallocate(FALLOC_FL_ZERO_RANGE) with send SMB ioctl(FSCTL_SET_ZERO_DATA) to server. It just set the range of the remote file to zero, but local page cache not update, then the data inconsistent with server, which leads the xfstest generic/008 failed. So we need to remove the local page caches before send SMB ioctl(FSCTL_SET_ZERO_DATA) to server. After next read, it will re-cache it. Fixes: 30175628bf7f5 ("[SMB3] Enable fallocate -z support for SMB3 mounts") Reported-by: Hulk Robot Signed-off-by: Zhang Xiaoxu Reviewed-by: Pavel Shilovsky Cc: stable@vger.kernel.org # v3.17 Signed-off-by: Steve French Signed-off-by: Sasha Levin commit fca24eff10d4cb75187a8b3042b63944df9b0f37 Author: Zhang Xiaoxu Date: Tue Jun 23 07:31:53 2020 -0400 cifs/smb3: Fix data inconsistent when punch hole [ Upstream commit acc91c2d8de4ef46ed751c5f9df99ed9a109b100 ] When punch hole success, we also can read old data from file: # strace -e trace=pread64,fallocate xfs_io -f -c "pread 20 40" \ -c "fpunch 20 40" -c"pread 20 40" file pread64(3, " version 5.8.0-rc1+"..., 40, 20) = 40 fallocate(3, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 20, 40) = 0 pread64(3, " version 5.8.0-rc1+"..., 40, 20) = 40 CIFS implements the fallocate(FALLOCATE_FL_PUNCH_HOLE) with send SMB ioctl(FSCTL_SET_ZERO_DATA) to server. It just set the range of the remote file to zero, but local page caches not updated, then the local page caches inconsistent with server. Also can be found by xfstests generic/316. So, we need to remove the page caches before send the SMB ioctl(FSCTL_SET_ZERO_DATA) to server. Fixes: 31742c5a33176 ("enable fallocate punch hole ("fallocate -p") for SMB3") Suggested-by: Pavel Shilovsky Reviewed-by: Pavel Shilovsky Signed-off-by: Zhang Xiaoxu Cc: stable@vger.kernel.org # v3.17 Signed-off-by: Steve French Signed-off-by: Sasha Levin commit 09ec04369def1a92755d8dbb981e9f17e5319996 Author: Kai-Heng Feng Date: Wed Jun 24 16:59:49 2020 +0300 xhci: Poll for U0 after disabling USB2 LPM [ Upstream commit b3d71abd135e6919ca0b6cab463738472653ddfb ] USB2 devices with LPM enabled may interrupt the system suspend: [ 932.510475] usb 1-7: usb suspend, wakeup 0 [ 932.510549] hub 1-0:1.0: hub_suspend [ 932.510581] usb usb1: bus suspend, wakeup 0 [ 932.510590] xhci_hcd 0000:00:14.0: port 9 not suspended [ 932.510593] xhci_hcd 0000:00:14.0: port 8 not suspended .. [ 932.520323] xhci_hcd 0000:00:14.0: Port change event, 1-7, id 7, portsc: 0x400e03 .. [ 932.591405] PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -16 [ 932.591414] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x160 returns -16 [ 932.591418] PM: Device 0000:00:14.0 failed to suspend async: error -16 During system suspend, USB core will let HC suspends the device if it doesn't have remote wakeup enabled and doesn't have any children. However, from the log above we can see that the usb 1-7 doesn't get bus suspended due to not in U0. After a while the port finished U2 -> U0 transition, interrupts the suspend process. The observation is that after disabling LPM, port doesn't transit to U0 immediately and can linger in U2. xHCI spec 4.23.5.2 states that the maximum exit latency for USB2 LPM should be BESL + 10us. The BESL for the affected device is advertised as 400us, which is still not enough based on my testing result. So let's use the maximum permitted latency, 10000, to poll for U0 status to solve the issue. Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200624135949.22611-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 137236fcdc6e4199a21cca5935565269ec4898e0 Author: Takashi Iwai Date: Wed Jun 24 14:23:40 2020 +0200 ALSA: usb-audio: Fix OOB access of mixer element list [ Upstream commit 220345e98f1cdc768eeb6e3364a0fa7ab9647fe7 ] The USB-audio mixer code holds a linked list of usb_mixer_elem_list, and several operations are performed for each mixer element. A few of them (snd_usb_mixer_notify_id() and snd_usb_mixer_interrupt_v2()) assume each mixer element being a usb_mixer_elem_info object that is a subclass of usb_mixer_elem_list, cast via container_of() and access it members. This may result in an out-of-bound access when a non-standard list element has been added, as spotted by syzkaller recently. This patch adds a new field, is_std_info, in usb_mixer_elem_list to indicate that the element is the usb_mixer_elem_info type or not, and skip the access to such an element if needed. Reported-by: syzbot+fb14314433463ad51625@syzkaller.appspotmail.com Reported-by: syzbot+2405ca3401e943c538b5@syzkaller.appspotmail.com Cc: Link: https://lore.kernel.org/r/20200624122340.9615-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 17553ecdd0b578b6eb0569b8b256310099b744ce Author: Takashi Iwai Date: Thu May 3 12:33:32 2018 +0200 ALSA: usb-audio: Clean up mixer element list traverse [ Upstream commit 8c558076c740e8009a96c6fdc3d4245dde62be77 ] Introduce a new macro for iterating over mixer element list for avoiding the open codes in many places. Also the open-coded container_of() and the forced cast to struct usb_mixer_elem_info are replaced with another simple macro, too. No functional changes but just readability improvement. Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 98f9e54a0d773489798485e93652657906b24774 Author: Daniel Mack Date: Fri Apr 8 19:52:02 2016 +0200 ALSA: usb-audio: allow clock source validity interrupts [ Upstream commit 191227d99a281333b50aaf82ab4152fbfa249c19 ] miniDSP USBStreamer UAC2 devices send clock validity changes with the control field set to zero. The current interrupt handler ignores all packets if the control field does not match the mixer element's, but it really should only do that in case that field is needed to distinguish multiple elements with the same ID. This patch implements a logic that lets notifications packets pass if the element ID is unique for a given device. Signed-off-by: Daniel Mack Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 5ac359df8c9f555699dadea1b4963d469e1d6678 Author: Julian Scheel Date: Thu Nov 16 17:35:17 2017 +0100 ALSA: usb-audio: uac1: Invalidate ctl on interrupt [ Upstream commit b2500b584cfd228d67e1e43daf27c8af865b499e ] When an interrupt occurs, the value of at least one of the belonging controls should have changed. To make sure they get re-read from device on the next read, invalidate the cache. This was correctly implemented for uac2 already, but missing for uac1. Signed-off-by: Julian Scheel Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit f5c6ecaa5cdf222c5674ef8ef64b36c445742029 Author: Joakim Tjernlund Date: Fri Jun 5 12:54:18 2020 +0200 cdc-acm: Add DISABLE_ECHO quirk for Microchip/SMSC chip commit 03894573f2913181ee5aae0089f333b2131f2d4b upstream. USB_DEVICE(0x0424, 0x274e) can send data before cdc_acm is ready, causing garbage chars on the TTY causing stray input to the shell and/or login prompt. Signed-off-by: Joakim Tjernlund Cc: stable@vger.kernel.org Acked-by: Oliver Neukum Link: https://lore.kernel.org/r/20200605105418.22263-1-joakim.tjernlund@infinera.com Signed-off-by: Greg Kroah-Hartman commit 08950ca6038a632a582ce3b173b1771eb3c7f6aa Author: Al Cooper Date: Wed Jun 24 16:59:46 2020 +0300 xhci: Fix enumeration issue when setting max packet size for FS devices. commit a73d9d9cfc3cfceabd91fb0b0c13e4062b6dbcd7 upstream. Unable to complete the enumeration of a USB TV Tuner device. Per XHCI spec (4.6.5), the EP state field of the input context shall be cleared for a set address command. In the special case of an FS device that has "MaxPacketSize0 = 8", the Linux XHCI driver does not do this before evaluating the context. With an XHCI controller that checks the EP state field for parameter context error this causes a problem in cases such as the device getting reset again after enumeration. When that field is cleared, the problem does not occur. This was found and fixed by Sasi Kumar. Cc: stable@vger.kernel.org Signed-off-by: Al Cooper Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200624135949.22611-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 56ee5f3070d798cb01cc33d22971667c54a8d6cd Author: Mathias Nyman Date: Wed Jun 24 16:59:45 2020 +0300 xhci: Fix incorrect EP_STATE_MASK commit dceea67058fe22075db3aed62d5cb62092be5053 upstream. EP_STATE_MASK should be 0x7 instead of 0xf xhci spec 6.2.3 shows that the EP state field in the endpoint context data structure consist of bits [2:0]. The old value included a bit from the next field which fortunately is a RsvdZ region. So hopefully this hasn't caused too much harm Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200624135949.22611-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 571b0abe7f4e5d5192c090c2d2642a1d21165d7f Author: Yick W. Tse Date: Sat Jun 13 11:40:06 2020 +0000 ALSA: usb-audio: add quirk for Denon DCD-1500RE commit c9808bbfed3cfc911ecb60fe8e80c0c27876c657 upstream. fix error "clock source 41 is not valid, cannot use" [] New USB device found, idVendor=154e, idProduct=1002, bcdDevice= 1.00 [] New USB device strings: Mfr=1, Product=2, SerialNumber=0 [] Product: DCD-1500RE [] Manufacturer: D & M Holdings Inc. [] [] clock source 41 is not valid, cannot use [] usbcore: registered new interface driver snd-usb-audio Signed-off-by: Yick W. Tse Cc: Link: https://lore.kernel.org/r/1373857985.210365.1592048406997@mail.yahoo.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit e79d2f7c853b52c36d68a5fa36456724e239dd65 Author: Tang Bin Date: Tue Jun 2 19:47:08 2020 +0800 usb: host: ehci-exynos: Fix error check in exynos_ehci_probe() commit 44ed240d62736ad29943ec01e41e194b96f7c5e9 upstream. If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in exynos_ehci_probe(). And when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here. Fixes: 1bcc5aa87f04 ("USB: Add initial S5P EHCI driver") Cc: stable Signed-off-by: Zhang Shengju Signed-off-by: Tang Bin Link: https://lore.kernel.org/r/20200602114708.28620-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman commit 1805eda1b533b07350a18a1a47c9624e458b4ad1 Author: Longfang Liu Date: Mon Jun 8 11:46:59 2020 +0800 USB: ehci: reopen solution for Synopsys HC bug commit 1ddcb71a3edf0e1682b6e056158e4c4b00325f66 upstream. A Synopsys USB2.0 core used in Huawei Kunpeng920 SoC has a bug which might cause the host controller not issuing ping. Bug description: After indicating an Interrupt on Async Advance, the software uses the doorbell mechanism to delete the Next Link queue head of the last executed queue head. At this time, the host controller still references the removed queue head(the queue head is NULL). NULL reference causes the host controller to lose the USB device. Solution: After deleting the Next Link queue head, when has_synopsys_hc_bug set to 1,the software can write one of the valid queue head addresses to the ASYNCLISTADDR register to allow the host controller to get the valid queue head. in order to solve that problem, this patch set the flag for Huawei Kunpeng920 There are detailed instructions and solutions in this patch: commit 2f7ac6c19997 ("USB: ehci: add workaround for Synopsys HC bug") Signed-off-by: Longfang Liu Cc: stable Acked-by: Alan Stern Link: https://lore.kernel.org/r/1591588019-44284-1-git-send-email-liulongfang@huawei.com Signed-off-by: Greg Kroah-Hartman commit 5e3d9f68f76a316a90387bc37d767d67a7a17658 Author: Dongdong Liu Date: Fri Feb 3 15:02:07 2017 -0600 PCI: Disable MSI for HiSilicon Hip06/Hip07 Root Ports commit 72f2ff0deb870145a5a2d24cd75b4f9936159a62 upstream. The PCIe Root Port in Hip06/Hip07 SoCs advertises an MSI capability, but it cannot generate MSIs. It can transfer MSI/MSI-X from downstream devices, but does not support MSI/MSI-X itself. Add a quirk to prevent use of MSI/MSI-X by the Root Port. [bhelgaas: changelog, sort vendor ID #define, drop device ID #define] Signed-off-by: Dongdong Liu Signed-off-by: Bjorn Helgaas Reviewed-by: Gabriele Paoloni Reviewed-by: Zhou Wang Signed-off-by: Greg Kroah-Hartman commit e04cbde43abe9a2c94716fd35f634a4867fbe6bd Author: Tomasz Meresiński Date: Wed Jun 3 22:33:46 2020 +0200 usb: add USB_QUIRK_DELAY_INIT for Logitech C922 commit 5d8021923e8a8cc37a421a64e27c7221f0fee33c upstream. The Logitech C922, just like other Logitech webcams, needs the USB_QUIRK_DELAY_INIT or it will randomly not respond after device connection Signed-off-by: Tomasz Meresiński Cc: stable Link: https://lore.kernel.org/r/20200603203347.7792-1-tomasz@meresinski.eu Signed-off-by: Greg Kroah-Hartman commit 736fa346f6d4572ff2b9cfcca19e203f1ffa7fa9 Author: Minas Harutyunyan Date: Tue Jun 9 12:28:11 2020 +0400 usb: dwc2: Postponed gadget registration to the udc class driver commit 207324a321a866401b098cadf19e4a2dd6584622 upstream. During dwc2 driver probe, after gadget registration to the udc class driver, if exist any builtin function driver it immediately bound to dwc2 and after init host side (dwc2_hcd_init()) stucked in host mode. Patch postpone gadget registration after host side initialization done. Fixes: 117777b2c3bb9 ("usb: dwc2: Move gadget probe function into platform code") Reported-by: kbuild test robot Tested-by: Marek Vasut Cc: stable Signed-off-by: Minas Harutyunyan Link: https://lore.kernel.org/r/f21cb38fecc72a230b86155d94c7e60c9cb66f58.1591690938.git.hminas@synopsys.com Signed-off-by: Greg Kroah-Hartman commit 2aefbfc6b4fb0d553b872b000e35f434d3e962ac Author: Chuhong Yuan Date: Wed Jun 10 10:48:44 2020 +0800 USB: ohci-sm501: Add missed iounmap() in remove commit 07c112fb09c86c0231f6ff0061a000ffe91c8eb9 upstream. This driver misses calling iounmap() in remove to undo the ioremap() called in probe. Add the missed call to fix it. Fixes: f54aab6ebcec ("usb: ohci-sm501 driver") Cc: stable Signed-off-by: Chuhong Yuan Acked-by: Alan Stern Link: https://lore.kernel.org/r/20200610024844.3628408-1-hslester96@gmail.com Signed-off-by: Greg Kroah-Hartman commit 7f8a6bbeec89a98e0c4cdcfe97841d5c8c6fc29e Author: Wang Hai Date: Thu Jun 11 15:57:50 2020 +0800 mld: fix memory leak in ipv6_mc_destroy_dev() [ Upstream commit ea2fce88d2fd678ed9d45354ff49b73f1d5615dd ] Commit a84d01647989 ("mld: fix memory leak in mld_del_delrec()") fixed the memory leak of MLD, but missing the ipv6_mc_destroy_dev() path, in which mca_sources are leaked after ma_put(). Using ip6_mc_clear_src() to take care of the missing free. BUG: memory leak unreferenced object 0xffff8881113d3180 (size 64): comm "syz-executor071", pid 389, jiffies 4294887985 (age 17.943s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 ff 02 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 ................ backtrace: [<000000002cbc483c>] kmalloc include/linux/slab.h:555 [inline] [<000000002cbc483c>] kzalloc include/linux/slab.h:669 [inline] [<000000002cbc483c>] ip6_mc_add1_src net/ipv6/mcast.c:2237 [inline] [<000000002cbc483c>] ip6_mc_add_src+0x7f5/0xbb0 net/ipv6/mcast.c:2357 [<0000000058b8b1ff>] ip6_mc_source+0xe0c/0x1530 net/ipv6/mcast.c:449 [<000000000bfc4fb5>] do_ipv6_setsockopt.isra.12+0x1b2c/0x3b30 net/ipv6/ipv6_sockglue.c:754 [<00000000e4e7a722>] ipv6_setsockopt+0xda/0x150 net/ipv6/ipv6_sockglue.c:950 [<0000000029260d9a>] rawv6_setsockopt+0x45/0x100 net/ipv6/raw.c:1081 [<000000005c1b46f9>] __sys_setsockopt+0x131/0x210 net/socket.c:2132 [<000000008491f7db>] __do_sys_setsockopt net/socket.c:2148 [inline] [<000000008491f7db>] __se_sys_setsockopt net/socket.c:2145 [inline] [<000000008491f7db>] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2145 [<00000000c7bc11c5>] do_syscall_64+0xa1/0x530 arch/x86/entry/common.c:295 [<000000005fb7a3f3>] entry_SYSCALL_64_after_hwframe+0x49/0xb3 Fixes: 1666d49e1d41 ("mld: do not remove mld souce list info when set link down") Reported-by: Hulk Robot Signed-off-by: Wang Hai Acked-by: Hangbin Liu Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit e1f795de2ddf1e06e470c07aadbf589cac58178e Author: Taehee Yoo Date: Tue Jun 16 15:52:05 2020 +0000 net: core: reduce recursion limit value [ Upstream commit fb7861d14c8d7edac65b2fcb6e8031cb138457b2 ] In the current code, ->ndo_start_xmit() can be executed recursively only 10 times because of stack memory. But, in the case of the vxlan, 10 recursion limit value results in a stack overflow. In the current code, the nested interface is limited by 8 depth. There is no critical reason that the recursion limitation value should be 10. So, it would be good to be the same value with the limitation value of nesting interface depth. Test commands: ip link add vxlan10 type vxlan vni 10 dstport 4789 srcport 4789 4789 ip link set vxlan10 up ip a a 192.168.10.1/24 dev vxlan10 ip n a 192.168.10.2 dev vxlan10 lladdr fc:22:33:44:55:66 nud permanent for i in {9..0} do let A=$i+1 ip link add vxlan$i type vxlan vni $i dstport 4789 srcport 4789 4789 ip link set vxlan$i up ip a a 192.168.$i.1/24 dev vxlan$i ip n a 192.168.$i.2 dev vxlan$i lladdr fc:22:33:44:55:66 nud permanent bridge fdb add fc:22:33:44:55:66 dev vxlan$A dst 192.168.$i.2 self done hping3 192.168.10.2 -2 -d 60000 Splat looks like: [ 103.814237][ T1127] ============================================================================= [ 103.871955][ T1127] BUG kmalloc-2k (Tainted: G B ): Padding overwritten. 0x00000000897a2e4f-0x000 [ 103.873187][ T1127] ----------------------------------------------------------------------------- [ 103.873187][ T1127] [ 103.874252][ T1127] INFO: Slab 0x000000005cccc724 objects=5 used=5 fp=0x0000000000000000 flags=0x10000000001020 [ 103.881323][ T1127] CPU: 3 PID: 1127 Comm: hping3 Tainted: G B 5.7.0+ #575 [ 103.882131][ T1127] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 103.883006][ T1127] Call Trace: [ 103.883324][ T1127] dump_stack+0x96/0xdb [ 103.883716][ T1127] slab_err+0xad/0xd0 [ 103.884106][ T1127] ? _raw_spin_unlock+0x1f/0x30 [ 103.884620][ T1127] ? get_partial_node.isra.78+0x140/0x360 [ 103.885214][ T1127] slab_pad_check.part.53+0xf7/0x160 [ 103.885769][ T1127] ? pskb_expand_head+0x110/0xe10 [ 103.886316][ T1127] check_slab+0x97/0xb0 [ 103.886763][ T1127] alloc_debug_processing+0x84/0x1a0 [ 103.887308][ T1127] ___slab_alloc+0x5a5/0x630 [ 103.887765][ T1127] ? pskb_expand_head+0x110/0xe10 [ 103.888265][ T1127] ? lock_downgrade+0x730/0x730 [ 103.888762][ T1127] ? pskb_expand_head+0x110/0xe10 [ 103.889244][ T1127] ? __slab_alloc+0x3e/0x80 [ 103.889675][ T1127] __slab_alloc+0x3e/0x80 [ 103.890108][ T1127] __kmalloc_node_track_caller+0xc7/0x420 [ ... ] Fixes: 11a766ce915f ("net: Increase xmit RECURSION_LIMIT to 10.") Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 31394a198cf91f03e676f7fb829361cf91230b0a Author: Tariq Toukan Date: Mon Jun 22 23:26:04 2020 +0300 net: Do not clear the sock TX queue in sk_set_socket() [ Upstream commit 41b14fb8724d5a4b382a63cb4a1a61880347ccb8 ] Clearing the sock TX queue in sk_set_socket() might cause unexpected out-of-order transmit when called from sock_orphan(), as outstanding packets can pick a different TX queue and bypass the ones already queued. This is undesired in general. More specifically, it breaks the in-order scheduling property guarantee for device-offloaded TLS sockets. Remove the call to sk_tx_queue_clear() in sk_set_socket(), and add it explicitly only where needed. Fixes: e022f0b4a03f ("net: Introduce sk_tx_queue_mapping") Signed-off-by: Tariq Toukan Reviewed-by: Boris Pismenny Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit c91b5162af314ad62f061f1047af5edc16a066dd Author: guodeqing Date: Wed Jun 17 10:07:16 2020 +0800 net: Fix the arp error in some cases [ Upstream commit 5eea3a63ff4aba6a26002e657a6d21934b7e2b96 ] ie., $ ifconfig eth0 6.6.6.6 netmask 255.255.255.0 $ ip rule add from 6.6.6.6 table 6666 $ ip route add 9.9.9.9 via 6.6.6.6 $ ping -I 6.6.6.6 9.9.9.9 PING 9.9.9.9 (9.9.9.9) from 6.6.6.6 : 56(84) bytes of data. 3 packets transmitted, 0 received, 100% packet loss, time 2079ms $ arp Address HWtype HWaddress Flags Mask Iface 6.6.6.6 (incomplete) eth0 The arp request address is error, this is because fib_table_lookup in fib_check_nh lookup the destnation 9.9.9.9 nexthop, the scope of the fib result is RT_SCOPE_LINK,the correct scope is RT_SCOPE_HOST. Here I add a check of whether this is RT_TABLE_MAIN to solve this problem. Fixes: 3bfd847203c6 ("net: Use passed in table for nexthop lookups") Signed-off-by: guodeqing Reviewed-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 73ec90cc942ece0754a207b3dfecdec7310f59fc Author: Marcelo Ricardo Leitner Date: Wed Jun 24 17:34:18 2020 -0300 sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket [ Upstream commit 471e39df96b9a4c4ba88a2da9e25a126624d7a9c ] If a socket is set ipv6only, it will still send IPv4 addresses in the INIT and INIT_ACK packets. This potentially misleads the peer into using them, which then would cause association termination. The fix is to not add IPv4 addresses to ipv6only sockets. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Corey Minyard Signed-off-by: Marcelo Ricardo Leitner Tested-by: Corey Minyard Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 363031b3bfedeba1c604107bb34320b299bcfba2 Author: Eric Dumazet Date: Mon Jun 15 20:37:07 2020 -0700 tcp: grow window for OOO packets only for SACK flows [ Upstream commit 662051215c758ae8545451628816204ed6cd372d ] Back in 2013, we made a change that broke fast retransmit for non SACK flows. Indeed, for these flows, a sender needs to receive three duplicate ACK before starting fast retransmit. Sending ACK with different receive window do not count. Even if enabling SACK is strongly recommended these days, there still are some cases where it has to be disabled. Not increasing the window seems better than having to rely on RTO. After the fix, following packetdrill test gives : // Initialize connection 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 32792 +0 > S. 0:0(0) ack 1 +0 < . 1:1(0) ack 1 win 514 +0 accept(3, ..., ...) = 4 +0 < . 1:1001(1000) ack 1 win 514 // Quick ack +0 > . 1:1(0) ack 1001 win 264 +0 < . 2001:3001(1000) ack 1 win 514 // DUPACK : Normally we should not change the window +0 > . 1:1(0) ack 1001 win 264 +0 < . 3001:4001(1000) ack 1 win 514 // DUPACK : Normally we should not change the window +0 > . 1:1(0) ack 1001 win 264 +0 < . 4001:5001(1000) ack 1 win 514 // DUPACK : Normally we should not change the window +0 > . 1:1(0) ack 1001 win 264 +0 < . 1001:2001(1000) ack 1 win 514 // Hole is repaired. +0 > . 1:1(0) ack 5001 win 272 Fixes: 4e4f1fc22681 ("tcp: properly increase rcv_ssthresh for ofo packets") Signed-off-by: Eric Dumazet Reported-by: Venkat Venkatsubra Acked-by: Neal Cardwell Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit b4a09240f5678de861d2c22824093251096b4eb5 Author: Taehee Yoo Date: Tue Jun 16 16:04:00 2020 +0000 ip6_gre: fix use-after-free in ip6gre_tunnel_lookup() [ Upstream commit dafabb6590cb15f300b77c095d50312e2c7c8e0f ] In the datapath, the ip6gre_tunnel_lookup() is used and it internally uses fallback tunnel device pointer, which is fb_tunnel_dev. This pointer variable should be set to NULL when a fb interface is deleted. But there is no routine to set fb_tunnel_dev pointer to NULL. So, this pointer will be still used after interface is deleted and it eventually results in the use-after-free problem. Test commands: ip netns add A ip netns add B ip link add eth0 type veth peer name eth1 ip link set eth0 netns A ip link set eth1 netns B ip netns exec A ip link set lo up ip netns exec A ip link set eth0 up ip netns exec A ip link add ip6gre1 type ip6gre local fc:0::1 \ remote fc:0::2 ip netns exec A ip -6 a a fc:100::1/64 dev ip6gre1 ip netns exec A ip link set ip6gre1 up ip netns exec A ip -6 a a fc:0::1/64 dev eth0 ip netns exec A ip link set ip6gre0 up ip netns exec B ip link set lo up ip netns exec B ip link set eth1 up ip netns exec B ip link add ip6gre1 type ip6gre local fc:0::2 \ remote fc:0::1 ip netns exec B ip -6 a a fc:100::2/64 dev ip6gre1 ip netns exec B ip link set ip6gre1 up ip netns exec B ip -6 a a fc:0::2/64 dev eth1 ip netns exec B ip link set ip6gre0 up ip netns exec A ping fc:100::2 -s 60000 & ip netns del B Splat looks like: [ 73.087285][ C1] BUG: KASAN: use-after-free in ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.088361][ C1] Read of size 4 at addr ffff888040559218 by task ping/1429 [ 73.089317][ C1] [ 73.089638][ C1] CPU: 1 PID: 1429 Comm: ping Not tainted 5.7.0+ #602 [ 73.090531][ C1] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 73.091725][ C1] Call Trace: [ 73.092160][ C1] [ 73.092556][ C1] dump_stack+0x96/0xdb [ 73.093122][ C1] print_address_description.constprop.6+0x2cc/0x450 [ 73.094016][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.094894][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.095767][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.096619][ C1] kasan_report+0x154/0x190 [ 73.097209][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.097989][ C1] ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.098750][ C1] ? gre_del_protocol+0x60/0x60 [gre] [ 73.099500][ C1] gre_rcv+0x1c5/0x1450 [ip6_gre] [ 73.100199][ C1] ? ip6gre_header+0xf00/0xf00 [ip6_gre] [ 73.100985][ C1] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 73.101830][ C1] ? ip6_input_finish+0x5/0xf0 [ 73.102483][ C1] ip6_protocol_deliver_rcu+0xcbb/0x1510 [ 73.103296][ C1] ip6_input_finish+0x5b/0xf0 [ 73.103920][ C1] ip6_input+0xcd/0x2c0 [ 73.104473][ C1] ? ip6_input_finish+0xf0/0xf0 [ 73.105115][ C1] ? rcu_read_lock_held+0x90/0xa0 [ 73.105783][ C1] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 73.106548][ C1] ipv6_rcv+0x1f1/0x300 [ ... ] Suggested-by: Eric Dumazet Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit e7589b2b72ebab5ad130cd1d6994865d27bf4c84 Author: Neal Cardwell Date: Wed Jun 24 12:42:02 2020 -0400 tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT [ Upstream commit b344579ca8478598937215f7005d6c7b84d28aee ] Mirja Kuehlewind reported a bug in Linux TCP CUBIC Hystart, where Hystart HYSTART_DELAY mechanism can exit Slow Start spuriously on an ACK when the minimum rtt of a connection goes down. From inspection it is clear from the existing code that this could happen in an example like the following: o The first 8 RTT samples in a round trip are 150ms, resulting in a curr_rtt of 150ms and a delay_min of 150ms. o The 9th RTT sample is 100ms. The curr_rtt does not change after the first 8 samples, so curr_rtt remains 150ms. But delay_min can be lowered at any time, so delay_min falls to 100ms. The code executes the HYSTART_DELAY comparison between curr_rtt of 150ms and delay_min of 100ms, and the curr_rtt is declared far enough above delay_min to force a (spurious) exit of Slow start. The fix here is simple: allow every RTT sample in a round trip to lower the curr_rtt. Fixes: ae27e98a5152 ("[TCP] CUBIC v2.3") Reported-by: Mirja Kuehlewind Signed-off-by: Neal Cardwell Signed-off-by: Eric Dumazet Acked-by: Soheil Hassas Yeganeh Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit aa0405f44245603adc48b97b975bb1e203c3173a Author: Taehee Yoo Date: Tue Jun 16 16:51:51 2020 +0000 ip_tunnel: fix use-after-free in ip_tunnel_lookup() [ Upstream commit ba61539c6ae57f4146284a5cb4f7b7ed8d42bf45 ] In the datapath, the ip_tunnel_lookup() is used and it internally uses fallback tunnel device pointer, which is fb_tunnel_dev. This pointer variable should be set to NULL when a fb interface is deleted. But there is no routine to set fb_tunnel_dev pointer to NULL. So, this pointer will be still used after interface is deleted and it eventually results in the use-after-free problem. Test commands: ip netns add A ip netns add B ip link add eth0 type veth peer name eth1 ip link set eth0 netns A ip link set eth1 netns B ip netns exec A ip link set lo up ip netns exec A ip link set eth0 up ip netns exec A ip link add gre1 type gre local 10.0.0.1 \ remote 10.0.0.2 ip netns exec A ip link set gre1 up ip netns exec A ip a a 10.0.100.1/24 dev gre1 ip netns exec A ip a a 10.0.0.1/24 dev eth0 ip netns exec B ip link set lo up ip netns exec B ip link set eth1 up ip netns exec B ip link add gre1 type gre local 10.0.0.2 \ remote 10.0.0.1 ip netns exec B ip link set gre1 up ip netns exec B ip a a 10.0.100.2/24 dev gre1 ip netns exec B ip a a 10.0.0.2/24 dev eth1 ip netns exec A hping3 10.0.100.2 -2 --flood -d 60000 & ip netns del B Splat looks like: [ 77.793450][ C3] ================================================================== [ 77.794702][ C3] BUG: KASAN: use-after-free in ip_tunnel_lookup+0xcc4/0xf30 [ 77.795573][ C3] Read of size 4 at addr ffff888060bd9c84 by task hping3/2905 [ 77.796398][ C3] [ 77.796664][ C3] CPU: 3 PID: 2905 Comm: hping3 Not tainted 5.8.0-rc1+ #616 [ 77.797474][ C3] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 77.798453][ C3] Call Trace: [ 77.798815][ C3] [ 77.799142][ C3] dump_stack+0x9d/0xdb [ 77.799605][ C3] print_address_description.constprop.7+0x2cc/0x450 [ 77.800365][ C3] ? ip_tunnel_lookup+0xcc4/0xf30 [ 77.800908][ C3] ? ip_tunnel_lookup+0xcc4/0xf30 [ 77.801517][ C3] ? ip_tunnel_lookup+0xcc4/0xf30 [ 77.802145][ C3] kasan_report+0x154/0x190 [ 77.802821][ C3] ? ip_tunnel_lookup+0xcc4/0xf30 [ 77.803503][ C3] ip_tunnel_lookup+0xcc4/0xf30 [ 77.804165][ C3] __ipgre_rcv+0x1ab/0xaa0 [ip_gre] [ 77.804862][ C3] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 77.805621][ C3] gre_rcv+0x304/0x1910 [ip_gre] [ 77.806293][ C3] ? lock_acquire+0x1a9/0x870 [ 77.806925][ C3] ? gre_rcv+0xfe/0x354 [gre] [ 77.807559][ C3] ? erspan_xmit+0x2e60/0x2e60 [ip_gre] [ 77.808305][ C3] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 77.809032][ C3] ? rcu_read_lock_held+0x90/0xa0 [ 77.809713][ C3] gre_rcv+0x1b8/0x354 [gre] [ ... ] Suggested-by: Eric Dumazet Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.") Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit c55e6da867de877521c37bdafe1ab690cc50d8c5 Author: David Christensen Date: Wed Jun 17 11:51:17 2020 -0700 tg3: driver sleeps indefinitely when EEH errors exceed eeh_max_freezes [ Upstream commit 3a2656a211caf35e56afc9425e6e518fa52f7fbc ] The driver function tg3_io_error_detected() calls napi_disable twice, without an intervening napi_enable, when the number of EEH errors exceeds eeh_max_freezes, resulting in an indefinite sleep while holding rtnl_lock. Add check for pcierr_recovery which skips code already executed for the "Frozen" state. Signed-off-by: David Christensen Reviewed-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 585fe3065d32397711c057e8b968cd04742e3125 Author: Jeremy Kerr Date: Mon Jun 15 10:54:56 2020 +0800 net: usb: ax88179_178a: fix packet alignment padding [ Upstream commit e869e7a17798d85829fa7d4f9bbe1eebd4b2d3f6 ] Using a AX88179 device (0b95:1790), I see two bytes of appended data on every RX packet. For example, this 48-byte ping, using 0xff as a payload byte: 04:20:22.528472 IP 192.168.1.1 > 192.168.1.2: ICMP echo request, id 2447, seq 1, length 64 0x0000: 000a cd35 ea50 000a cd35 ea4f 0800 4500 0x0010: 0054 c116 4000 4001 f63e c0a8 0101 c0a8 0x0020: 0102 0800 b633 098f 0001 87ea cd5e 0000 0x0030: 0000 dcf2 0600 0000 0000 ffff ffff ffff 0x0040: ffff ffff ffff ffff ffff ffff ffff ffff 0x0050: ffff ffff ffff ffff ffff ffff ffff ffff 0x0060: ffff 961f Those last two bytes - 96 1f - aren't part of the original packet. In the ax88179 RX path, the usbnet rx_fixup function trims a 2-byte 'alignment pseudo header' from the start of the packet, and sets the length from a per-packet field populated by hardware. It looks like that length field *includes* the 2-byte header; the current driver assumes that it's excluded. This change trims the 2-byte alignment header after we've set the packet length, so the resulting packet length is correct. While we're moving the comment around, this also fixes the spelling of 'pseudo'. Signed-off-by: Jeremy Kerr Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 81f8ebaa9cbcd76f420676b4f52396653182afbb Author: Yang Yingliang Date: Tue Jun 16 09:39:21 2020 +0000 net: fix memleak in register_netdevice() [ Upstream commit 814152a89ed52c722ab92e9fbabcac3cb8a39245 ] I got a memleak report when doing some fuzz test: unreferenced object 0xffff888112584000 (size 13599): comm "ip", pid 3048, jiffies 4294911734 (age 343.491s) hex dump (first 32 bytes): 74 61 70 30 00 00 00 00 00 00 00 00 00 00 00 00 tap0............ 00 ee d9 19 81 88 ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<000000002f60ba65>] __kmalloc_node+0x309/0x3a0 [<0000000075b211ec>] kvmalloc_node+0x7f/0xc0 [<00000000d3a97396>] alloc_netdev_mqs+0x76/0xfc0 [<00000000609c3655>] __tun_chr_ioctl+0x1456/0x3d70 [<000000001127ca24>] ksys_ioctl+0xe5/0x130 [<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0 [<00000000e1023498>] do_syscall_64+0x56/0xa0 [<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 unreferenced object 0xffff888111845cc0 (size 8): comm "ip", pid 3048, jiffies 4294911734 (age 343.491s) hex dump (first 8 bytes): 74 61 70 30 00 88 ff ff tap0.... backtrace: [<000000004c159777>] kstrdup+0x35/0x70 [<00000000d8b496ad>] kstrdup_const+0x3d/0x50 [<00000000494e884a>] kvasprintf_const+0xf1/0x180 [<0000000097880a2b>] kobject_set_name_vargs+0x56/0x140 [<000000008fbdfc7b>] dev_set_name+0xab/0xe0 [<000000005b99e3b4>] netdev_register_kobject+0xc0/0x390 [<00000000602704fe>] register_netdevice+0xb61/0x1250 [<000000002b7ca244>] __tun_chr_ioctl+0x1cd1/0x3d70 [<000000001127ca24>] ksys_ioctl+0xe5/0x130 [<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0 [<00000000e1023498>] do_syscall_64+0x56/0xa0 [<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 unreferenced object 0xffff88811886d800 (size 512): comm "ip", pid 3048, jiffies 4294911734 (age 343.491s) hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff c0 66 3d a3 ff ff ff ff .........f=..... backtrace: [<0000000050315800>] device_add+0x61e/0x1950 [<0000000021008dfb>] netdev_register_kobject+0x17e/0x390 [<00000000602704fe>] register_netdevice+0xb61/0x1250 [<000000002b7ca244>] __tun_chr_ioctl+0x1cd1/0x3d70 [<000000001127ca24>] ksys_ioctl+0xe5/0x130 [<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0 [<00000000e1023498>] do_syscall_64+0x56/0xa0 [<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 If call_netdevice_notifiers() failed, then rollback_registered() calls netdev_unregister_kobject() which holds the kobject. The reference cannot be put because the netdev won't be add to todo list, so it will leads a memleak, we need put the reference to avoid memleak. Reported-by: Hulk Robot Signed-off-by: Yang Yingliang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 1a78856e7bc85f7442ba49074ce28331f2df8028 Author: Al Viro Date: Sat Jun 6 23:44:24 2020 -0400 fix a braino in "sparc32: fix register window handling in genregs32_[gs]et()" [ Upstream commit 9d964e1b82d8182184153b70174f445ea616f053 ] lost npc in PTRACE_SETREGSET, breaking PTRACE_SETREGS as well Fixes: cf51e129b968 "sparc32: fix register window handling in genregs32_[gs]et()" Signed-off-by: Al Viro Signed-off-by: Sasha Levin commit ab1276b9abaceae236fc44bfc867d9682eda45bb Author: Valentin Longchamp Date: Tue Jun 9 22:11:54 2020 +0200 net: sched: export __netdev_watchdog_up() [ Upstream commit 1a3db27ad9a72d033235b9673653962c02e3486e ] Since the quiesce/activate rework, __netdev_watchdog_up() is directly called in the ucc_geth driver. Unfortunately, this function is not available for modules and thus ucc_geth cannot be built as a module anymore. Fix it by exporting __netdev_watchdog_up(). Since the commit introducing the regression was backported to stable branches, this one should ideally be as well. Fixes: 79dde73cf9bc ("net/ethernet/freescale: rework quiesce/activate for ucc_geth") Signed-off-by: Valentin Longchamp Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 387654fc19509d6aef9d08399b4665b9117b820c Author: Ridge Kennedy Date: Tue Feb 4 12:24:00 2020 +1300 l2tp: Allow duplicate session creation with UDP commit 0d0d9a388a858e271bb70e71e99e7fe2a6fd6f64 upstream. In the past it was possible to create multiple L2TPv3 sessions with the same session id as long as the sessions belonged to different tunnels. The resulting sessions had issues when used with IP encapsulated tunnels, but worked fine with UDP encapsulated ones. Some applications began to rely on this behaviour to avoid having to negotiate unique session ids. Some time ago a change was made to require session ids to be unique across all tunnels, breaking the applications making use of this "feature". This change relaxes the duplicate session id check to allow duplicates if both of the colliding sessions belong to UDP encapsulated tunnels. Fixes: dbdbc73b4478 ("l2tp: fix duplicate session creation") Signed-off-by: Ridge Kennedy Acked-by: James Chapman Signed-off-by: David S. Miller Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit de4700c2c877fa4774295eb11efb4d5cd6b24380 Author: Martin Wilck Date: Mon Nov 27 23:47:34 2017 +0100 scsi: scsi_devinfo: handle non-terminated strings commit ba69ead9e9e9bb3cec5faf03526c36764ac8942a upstream. devinfo->vendor and devinfo->model aren't necessarily zero-terminated. Fixes: b8018b973c7c "scsi_devinfo: fixup string compare" Signed-off-by: Martin Wilck Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit 1ab4cc9c614e9cff3a802551114892b15b8ecb4a Author: Toke Høiland-Jørgensen Date: Tue Jun 23 17:00:53 2020 +0200 net: Revert "pkt_sched: fq: use proper locking in fq_dump_stats()" This reverts commit 191cf872190de28a92e1bd2b56d8860e37e07443 which is commit 695b4ec0f0a9cf29deabd3ac075911d58b31f42b upstream. That commit should never have been backported since it relies on a change in locking semantics that was introduced in v4.8 and not backported. Because of this, the backported commit to sch_fq leads to lockups because of the double locking. Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: Greg Kroah-Hartman commit 602c47fbf46b50444d0dba76f8a4d9cedcb0f308 Author: Ahmed S. Darwish Date: Wed Jun 3 16:49:44 2020 +0200 net: core: device_rename: Use rwsem instead of a seqcount [ Upstream commit 11d6011c2cf29f7c8181ebde6c8bc0c4d83adcd7 ] Sequence counters write paths are critical sections that must never be preempted, and blocking, even for CONFIG_PREEMPTION=n, is not allowed. Commit 5dbe7c178d3f ("net: fix kernel deadlock with interface rename and netdev name retrieval.") handled a deadlock, observed with CONFIG_PREEMPTION=n, where the devnet_rename seqcount read side was infinitely spinning: it got scheduled after the seqcount write side blocked inside its own critical section. To fix that deadlock, among other issues, the commit added a cond_resched() inside the read side section. While this will get the non-preemptible kernel eventually unstuck, the seqcount reader is fully exhausting its slice just spinning -- until TIF_NEED_RESCHED is set. The fix is also still broken: if the seqcount reader belongs to a real-time scheduling policy, it can spin forever and the kernel will livelock. Disabling preemption over the seqcount write side critical section will not work: inside it are a number of GFP_KERNEL allocations and mutex locking through the drivers/base/ :: device_rename() call chain. >From all the above, replace the seqcount with a rwsem. Fixes: 5dbe7c178d3f (net: fix kernel deadlock with interface rename and netdev name retrieval.) Fixes: 30e6c9fa93cf (net: devnet_rename_seq should be a seqcount) Fixes: c91f6df2db49 (sockopt: Change getsockopt() of SO_BINDTODEVICE to return an interface name) Cc: Reported-by: kbuild test robot [ v1 missing up_read() on error exit ] Reported-by: Dan Carpenter [ v1 missing up_read() on error exit ] Signed-off-by: Ahmed S. Darwish Reviewed-by: Sebastian Andrzej Siewior Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 20f05ba16c567b8ee66a7598d2726dd32cdc4434 Author: Thomas Gleixner Date: Tue Oct 15 21:18:08 2019 +0200 sched/rt, net: Use CONFIG_PREEMPTION.patch [ Upstream commit 2da2b32fd9346009e9acdb68c570ca8d3966aba7 ] CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT. Both PREEMPT and PREEMPT_RT require the same functionality which today depends on CONFIG_PREEMPT. Update the comment to use CONFIG_PREEMPTION. Signed-off-by: Thomas Gleixner Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Thomas Gleixner Acked-by: David S. Miller Cc: Linus Torvalds Cc: Peter Zijlstra Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20191015191821.11479-22-bigeasy@linutronix.de Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 496fed53d83ecd8a1f6309bd8f07936e7ba70649 Author: Chen Yu Date: Fri May 22 01:59:00 2020 +0800 e1000e: Do not wake up the system via WOL if device wakeup is disabled [ Upstream commit 6bf6be1127f7e6d4bf39f84d56854e944d045d74 ] Currently the system will be woken up via WOL(Wake On LAN) even if the device wakeup ability has been disabled via sysfs: cat /sys/devices/pci0000:00/0000:00:1f.6/power/wakeup disabled The system should not be woken up if the user has explicitly disabled the wake up ability for this device. This patch clears the WOL ability of this network device if the user has disabled the wake up ability in sysfs. Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver") Reported-by: "Rafael J. Wysocki" Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Chen Yu Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin commit 7b692b9696d597964fb41293f0ee1c9732a8fa7d Author: Jiri Olsa Date: Tue May 12 17:03:18 2020 +0900 kretprobe: Prevent triggering kretprobe from within kprobe_flush_task [ Upstream commit 9b38cc704e844e41d9cf74e647bff1d249512cb3 ] Ziqian reported lockup when adding retprobe on _raw_spin_lock_irqsave. My test was also able to trigger lockdep output: ============================================ WARNING: possible recursive locking detected 5.6.0-rc6+ #6 Not tainted -------------------------------------------- sched-messaging/2767 is trying to acquire lock: ffffffff9a492798 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_hash_lock+0x52/0xa0 but task is already holding lock: ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(kretprobe_table_locks[i].lock)); lock(&(kretprobe_table_locks[i].lock)); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by sched-messaging/2767: #0: ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50 stack backtrace: CPU: 3 PID: 2767 Comm: sched-messaging Not tainted 5.6.0-rc6+ #6 Call Trace: dump_stack+0x96/0xe0 __lock_acquire.cold.57+0x173/0x2b7 ? native_queued_spin_lock_slowpath+0x42b/0x9e0 ? lockdep_hardirqs_on+0x590/0x590 ? __lock_acquire+0xf63/0x4030 lock_acquire+0x15a/0x3d0 ? kretprobe_hash_lock+0x52/0xa0 _raw_spin_lock_irqsave+0x36/0x70 ? kretprobe_hash_lock+0x52/0xa0 kretprobe_hash_lock+0x52/0xa0 trampoline_handler+0xf8/0x940 ? kprobe_fault_handler+0x380/0x380 ? find_held_lock+0x3a/0x1c0 kretprobe_trampoline+0x25/0x50 ? lock_acquired+0x392/0xbc0 ? _raw_spin_lock_irqsave+0x50/0x70 ? __get_valid_kprobe+0x1f0/0x1f0 ? _raw_spin_unlock_irqrestore+0x3b/0x40 ? finish_task_switch+0x4b9/0x6d0 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 The code within the kretprobe handler checks for probe reentrancy, so we won't trigger any _raw_spin_lock_irqsave probe in there. The problem is in outside kprobe_flush_task, where we call: kprobe_flush_task kretprobe_table_lock raw_spin_lock_irqsave _raw_spin_lock_irqsave where _raw_spin_lock_irqsave triggers the kretprobe and installs kretprobe_trampoline handler on _raw_spin_lock_irqsave return. The kretprobe_trampoline handler is then executed with already locked kretprobe_table_locks, and first thing it does is to lock kretprobe_table_locks ;-) the whole lockup path like: kprobe_flush_task kretprobe_table_lock raw_spin_lock_irqsave _raw_spin_lock_irqsave ---> probe triggered, kretprobe_trampoline installed ---> kretprobe_table_locks locked kretprobe_trampoline trampoline_handler kretprobe_hash_lock(current, &head, &flags); <--- deadlock Adding kprobe_busy_begin/end helpers that mark code with fake probe installed to prevent triggering of another kprobe within this code. Using these helpers in kprobe_flush_task, so the probe recursion protection check is hit and the probe is never set to prevent above lockup. Link: http://lkml.kernel.org/r/158927059835.27680.7011202830041561604.stgit@devnote2 Fixes: ef53d9c5e4da ("kprobes: improve kretprobe scalability with hashed locking") Cc: Ingo Molnar Cc: "Gustavo A . R . Silva" Cc: Anders Roxell Cc: "Naveen N . Rao" Cc: Anil S Keshavamurthy Cc: David Miller Cc: Ingo Molnar Cc: Peter Zijlstra Cc: stable@vger.kernel.org Reported-by: "Ziqian SUN (Zamir)" Acked-by: Masami Hiramatsu Signed-off-by: Jiri Olsa Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Sasha Levin commit 7f0e8bc7e71c1b42e81a0fcd52675bb039b4ac82 Author: Masami Hiramatsu Date: Sun Feb 24 01:50:49 2019 +0900 x86/kprobes: Avoid kretprobe recursion bug [ Upstream commit b191fa96ea6dc00d331dcc28c1f7db5e075693a0 ] Avoid kretprobe recursion loop bg by setting a dummy kprobes to current_kprobe per-CPU variable. This bug has been introduced with the asm-coded trampoline code, since previously it used another kprobe for hooking the function return placeholder (which only has a nop) and trampoline handler was called from that kprobe. This revives the old lost kprobe again. With this fix, we don't see deadlock anymore. And you can see that all inner-called kretprobe are skipped. event_1 235 0 event_2 19375 19612 The 1st column is recorded count and the 2nd is missed count. Above shows (event_1 rec) + (event_2 rec) ~= (event_2 missed) (some difference are here because the counter is racy) Reported-by: Andrea Righi Tested-by: Andrea Righi Signed-off-by: Masami Hiramatsu Acked-by: Steven Rostedt Cc: Linus Torvalds Cc: Mathieu Desnoyers Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: stable@vger.kernel.org Fixes: c9becf58d935 ("[PATCH] kretprobe: kretprobe-booster") Link: http://lkml.kernel.org/r/155094064889.6137.972160690963039.stgit@devbox Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 190d22176f8d3790533e5aae85b9937df3ac61c0 Author: Naveen N. Rao Date: Wed Feb 8 14:27:31 2017 +0530 powerpc/kprobes: Fixes for kprobe_lookup_name() on BE [ Upstream commit 30176466e36aadba01e1a630cf42397a3438efa4 ] Fix two issues with kprobes.h on BE which were exposed with the optprobes work: - one, having to do with a missing include for linux/module.h for MODULE_NAME_LEN -- this didn't show up previously since the only users of kprobe_lookup_name were in kprobes.c, which included linux/module.h through other headers, and - two, with a missing const qualifier for a local variable which ends up referring a string literal. Again, this is unique to how kprobe_lookup_name is being invoked in optprobes.c Signed-off-by: Naveen N. Rao Signed-off-by: Michael Ellerman Signed-off-by: Sasha Levin commit f637e2c75f9a8bc451ca0e4731c2bd6395e4c365 Author: Masami Hiramatsu Date: Tue May 12 17:02:56 2020 +0900 kprobes: Fix to protect kick_kprobe_optimizer() by kprobe_mutex [ Upstream commit 1a0aa991a6274161c95a844c58cfb801d681eb59 ] In kprobe_optimizer() kick_kprobe_optimizer() is called without kprobe_mutex, but this can race with other caller which is protected by kprobe_mutex. To fix that, expand kprobe_mutex protected area to protect kick_kprobe_optimizer() call. Link: http://lkml.kernel.org/r/158927057586.27680.5036330063955940456.stgit@devnote2 Fixes: cd7ebe2298ff ("kprobes: Use text_poke_smp_batch for optimizing") Cc: Ingo Molnar Cc: "Gustavo A . R . Silva" Cc: Anders Roxell Cc: "Naveen N . Rao" Cc: Anil S Keshavamurthy Cc: David Miller Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Ziqian SUN Cc: stable@vger.kernel.org Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Sasha Levin commit 44f5e4fc2605b4dd35360bf77557bf7577cb3e3f Author: Eric Biggers Date: Thu Jun 4 11:52:53 2020 -0700 crypto: algboss - don't wait during notifier callback commit 77251e41f89a813b4090f5199442f217bbf11297 upstream. When a crypto template needs to be instantiated, CRYPTO_MSG_ALG_REQUEST is sent to crypto_chain. cryptomgr_schedule_probe() handles this by starting a thread to instantiate the template, then waiting for this thread to complete via crypto_larval::completion. This can deadlock because instantiating the template may require loading modules, and this (apparently depending on userspace) may need to wait for the crc-t10dif module (lib/crc-t10dif.c) to be loaded. But crc-t10dif's module_init function uses crypto_register_notifier() and therefore takes crypto_chain.rwsem for write. That can't proceed until the notifier callback has finished, as it holds this semaphore for read. Fix this by removing the wait on crypto_larval::completion from within cryptomgr_schedule_probe(). It's actually unnecessary because crypto_alg_mod_lookup() calls crypto_larval_wait() itself after sending CRYPTO_MSG_ALG_REQUEST. This only actually became a problem in v4.20 due to commit b76377543b73 ("crc-t10dif: Pick better transform if one becomes available"), but the unnecessary wait was much older. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207159 Reported-by: Mike Gerow Fixes: 398710379f51 ("crypto: algapi - Move larval completion into algboss") Cc: # v3.6+ Cc: Martin K. Petersen Signed-off-by: Eric Biggers Reported-by: Kai Lüke Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 578c6ed26c57ec8e96bf7baf9b1b56d25eb8f918 Author: Ahmed S. Darwish Date: Wed Jun 3 16:49:48 2020 +0200 block: nr_sects_write(): Disable preemption on seqcount write [ Upstream commit 15b81ce5abdc4b502aa31dff2d415b79d2349d2f ] For optimized block readers not holding a mutex, the "number of sectors" 64-bit value is protected from tearing on 32-bit architectures by a sequence counter. Disable preemption before entering that sequence counter's write side critical section. Otherwise, the read side can preempt the write side section and spin for the entire scheduler tick. If the reader belongs to a real-time scheduling class, it can spin forever and the kernel will livelock. Fixes: c83f6bf98dc1 ("block: add partition resize function to blkpg ioctl") Cc: Signed-off-by: Ahmed S. Darwish Reviewed-by: Sebastian Andrzej Siewior Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 885237aebb80b80086602f81686531241e028fc0 Author: Al Viro Date: Sun May 17 15:37:50 2020 -0400 sparc64: fix misuses of access_process_vm() in genregs32_[sg]et() [ Upstream commit 142cd25293f6a7ecbdff4fb0af17de6438d46433 ] We do need access_process_vm() to access the target's reg_window. However, access to caller's memory (storing the result in genregs32_get(), fetching the new values in case of genregs32_set()) should be done by normal uaccess primitives. Fixes: ad4f95764040 ([SPARC64]: Fix user accesses in regset code.) Cc: stable@kernel.org Signed-off-by: Al Viro Signed-off-by: Sasha Levin commit a039515ce219ac78d7119e79e295910956de6e7e Author: Lyude Paul Date: Fri Apr 3 15:47:15 2020 -0400 drm/dp_mst: Increase ACT retry timeout to 3s [ Upstream commit 873a95e0d59ac06901ae261dda0b7165ffd002b8 ] Currently we only poll for an ACT up to 30 times, with a busy-wait delay of 100µs between each attempt - giving us a timeout of 2900µs. While this might seem sensible, it would appear that in certain scenarios it can take dramatically longer then that for us to receive an ACT. On one of the EVGA MST hubs that I have available, I observed said hub sometimes taking longer then a second before signalling the ACT. These delays mostly seem to occur when previous sideband messages we've sent are NAKd by the hub, however it wouldn't be particularly surprising if it's possible to reproduce times like this simply by introducing branch devices with large LCTs since payload allocations have to take effect on every downstream device up to the payload's target. So, instead of just retrying 30 times we poll for the ACT for up to 3ms, and additionally use usleep_range() to avoid a very long and rude busy-wait. Note that the previous retry count of 30 appears to have been arbitrarily chosen, as I can't find any mention of a recommended timeout or retry count for ACTs in the DisplayPort 2.0 specification. This also goes for the range we were previously using for udelay(), although I suspect that was just copied from the recommended delay for link training on SST devices. Changes since v1: * Use readx_poll_timeout() instead of open-coding timeout loop - Sean Paul Changes since v2: * Increase poll interval to 200us - Sean Paul * Print status in hex when we timeout waiting for ACT - Sean Paul Signed-off-by: Lyude Paul Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)") Cc: Sean Paul Cc: # v3.17+ Reviewed-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20200406221253.1307209-4-lyude@redhat.com Signed-off-by: Sasha Levin commit bd0fc767970606d51df43e89e849567a040bd08b Author: Jeffle Xu Date: Fri May 22 12:18:44 2020 +0800 ext4: fix partial cluster initialization when splitting extent [ Upstream commit cfb3c85a600c6aa25a2581b3c1c4db3460f14e46 ] Fix the bug when calculating the physical block number of the first block in the split extent. This bug will cause xfstests shared/298 failure on ext4 with bigalloc enabled occasionally. Ext4 error messages indicate that previously freed blocks are being freed again, and the following fsck will fail due to the inconsistency of block bitmap and bg descriptor. The following is an example case: 1. First, Initialize a ext4 filesystem with cluster size '16K', block size '4K', in which case, one cluster contains four blocks. 2. Create one file (e.g., xxx.img) on this ext4 filesystem. Now the extent tree of this file is like: ... 36864:[0]4:220160 36868:[0]14332:145408 51200:[0]2:231424 ... 3. Then execute PUNCH_HOLE fallocate on this file. The hole range is like: .. ext4_ext_remove_space: dev 254,16 ino 12 since 49506 end 49506 depth 1 ext4_ext_remove_space: dev 254,16 ino 12 since 49544 end 49546 depth 1 ext4_ext_remove_space: dev 254,16 ino 12 since 49605 end 49607 depth 1 ... 4. Then the extent tree of this file after punching is like ... 49507:[0]37:158047 49547:[0]58:158087 ... 5. Detailed procedure of punching hole [49544, 49546] 5.1. The block address space: ``` lblk ~49505 49506 49507~49543 49544~49546 49547~ ---------+------+-------------+----------------+-------- extent | hole | extent | hole | extent ---------+------+-------------+----------------+-------- pblk ~158045 158046 158047~158083 158084~158086 158087~ ``` 5.2. The detailed layout of cluster 39521: ``` cluster 39521 <-------------------------------> hole extent <----------------------><-------- lblk 49544 49545 49546 49547 +-------+-------+-------+-------+ | | | | | +-------+-------+-------+-------+ pblk 158084 1580845 158086 158087 ``` 5.3. The ftrace output when punching hole [49544, 49546]: - ext4_ext_remove_space (start 49544, end 49546) - ext4_ext_rm_leaf (start 49544, end 49546, last_extent [49507(158047), 40], partial [pclu 39522 lblk 0 state 2]) - ext4_remove_blocks (extent [49507(158047), 40], from 49544 to 49546, partial [pclu 39522 lblk 0 state 2] - ext4_free_blocks: (block 158084 count 4) - ext4_mballoc_free (extent 1/6753/1) 5.4. Ext4 error message in dmesg: EXT4-fs error (device vdb): mb_free_blocks:1457: group 1, block 158084:freeing already freed block (bit 6753); block bitmap corrupt. EXT4-fs error (device vdb): ext4_mb_generate_buddy:747: group 1, block bitmap and bg descriptor inconsistent: 19550 vs 19551 free clusters In this case, the whole cluster 39521 is freed mistakenly when freeing pblock 158084~158086 (i.e., the first three blocks of this cluster), although pblock 158087 (the last remaining block of this cluster) has not been freed yet. The root cause of this isuue is that, the pclu of the partial cluster is calculated mistakenly in ext4_ext_remove_space(). The correct partial_cluster.pclu (i.e., the cluster number of the first block in the next extent, that is, lblock 49597 (pblock 158086)) should be 39521 rather than 39522. Fixes: f4226d9ea400 ("ext4: fix partial cluster initialization") Signed-off-by: Jeffle Xu Reviewed-by: Eric Whitney Cc: stable@kernel.org # v3.19+ Link: https://lore.kernel.org/r/1590121124-37096-1-git-send-email-jefflexu@linux.alibaba.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit 13f03f2bb77717ba7fcab132284b1e9e0fb847fa Author: Tom Rix Date: Wed Jun 10 14:57:13 2020 -0700 selinux: fix double free commit 65de50969a77509452ae590e9449b70a22b923bb upstream. Clang's static analysis tool reports these double free memory errors. security/selinux/ss/services.c:2987:4: warning: Attempt to free released memory [unix.Malloc] kfree(bnames[i]); ^~~~~~~~~~~~~~~~ security/selinux/ss/services.c:2990:2: warning: Attempt to free released memory [unix.Malloc] kfree(bvalues); ^~~~~~~~~~~~~~ So improve the security_get_bools error handling by freeing these variables and setting their return pointers to NULL and the return len to 0 Cc: stable@vger.kernel.org Signed-off-by: Tom Rix Acked-by: Stephen Smalley Signed-off-by: Paul Moore Signed-off-by: Greg Kroah-Hartman commit 311e2f769e854b50e9843f2eb95087c3b997d060 Author: Huacai Chen Date: Tue Mar 31 14:18:08 2020 +0800 drm/qxl: Use correct notify port address when creating cursor ring commit 80e5f89da3ab949fbbf1cae01dfaea29f5483a75 upstream. The command ring and cursor ring use different notify port addresses definition: QXL_IO_NOTIFY_CMD and QXL_IO_NOTIFY_CURSOR. However, in qxl_device_init() we use QXL_IO_NOTIFY_CMD to create both command ring and cursor ring. This doesn't cause any problems now, because QEMU's behaviors on QXL_IO_NOTIFY_CMD and QXL_IO_NOTIFY_CURSOR are the same. However, QEMU's behavior may be change in future, so let's fix it. P.S.: In the X.org QXL driver, the notify port address of cursor ring is correct. Signed-off-by: Huacai Chen Cc: Link: http://patchwork.freedesktop.org/patch/msgid/1585635488-17507-1-git-send-email-chenhc@lemote.com Signed-off-by: Gerd Hoffmann Signed-off-by: Greg Kroah-Hartman commit 8a654598ee2e4a4f4e036e165c8e599852cb7c03 Author: Lyude Paul Date: Fri Apr 3 14:08:32 2020 -0400 drm/dp_mst: Reformat drm_dp_check_act_status() a bit commit a5cb5fa6c3a5c2cf492db667b8670ee7b044b79f upstream. Just add a bit more line wrapping, get rid of some extraneous whitespace, remove an unneeded goto label, and move around some variable declarations. No functional changes here. Signed-off-by: Lyude Paul [this isn't a fix, but it's needed for the fix that comes after this] Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)") Cc: Sean Paul Cc: # v3.17+ Reviewed-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20200406221253.1307209-3-lyude@redhat.com Signed-off-by: Greg Kroah-Hartman commit 64565a55d5867698a7bbe95da924d15006c8db6d Author: Wolfram Sang Date: Mon Jun 15 09:58:10 2020 +0200 drm: encoder_slave: fix refcouting error for modules [ Upstream commit f78d4032de60f50fd4afaa0fb68ea03b985f820a ] module_put() balances try_module_get(), not request_module(). Fix the error path to match that. Fixes: 2066facca4c7 ("drm/kms: slave encoder interface.") Signed-off-by: Wolfram Sang Reviewed-by: Emil Velikov Acked-by: Daniel Vetter Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin commit d8a71a53366a7be14e73bf5dde57846a23d9fa0d Author: Kai-Heng Feng Date: Wed Jun 3 15:48:19 2020 +0800 libata: Use per port sync for detach [ Upstream commit b5292111de9bb70cba3489075970889765302136 ] Commit 130f4caf145c ("libata: Ensure ata_port probe has completed before detach") may cause system freeze during suspend. Using async_synchronize_full() in PM callbacks is wrong, since async callbacks that are already scheduled may wait for not-yet-scheduled callbacks, causes a circular dependency. Instead of using big hammer like async_synchronize_full(), use async cookie to make sure port probe are synced, without affecting other scheduled PM callbacks. Fixes: 130f4caf145c ("libata: Ensure ata_port probe has completed before detach") Suggested-by: John Garry Signed-off-by: Kai-Heng Feng Tested-by: John Garry BugLink: https://bugs.launchpad.net/bugs/1867983 Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit f9aa90e1b8aa2a133d4046223248ab61688445f5 Author: Jason Yan Date: Tue Jun 16 20:16:55 2020 +0800 block: Fix use-after-free in blkdev_get() [ Upstream commit 2d3a8e2deddea6c89961c422ec0c5b851e648c14 ] In blkdev_get() we call __blkdev_get() to do some internal jobs and if there is some errors in __blkdev_get(), the bdput() is called which means we have released the refcount of the bdev (actually the refcount of the bdev inode). This means we cannot access bdev after that point. But acctually bdev is still accessed in blkdev_get() after calling __blkdev_get(). This results in use-after-free if the refcount is the last one we released in __blkdev_get(). Let's take a look at the following scenerio: CPU0 CPU1 CPU2 blkdev_open blkdev_open Remove disk bd_acquire blkdev_get __blkdev_get del_gendisk bdev_unhash_inode bd_acquire bdev_get_gendisk bd_forget failed because of unhashed bdput bdput (the last one) bdev_evict_inode access bdev => use after free [ 459.350216] BUG: KASAN: use-after-free in __lock_acquire+0x24c1/0x31b0 [ 459.351190] Read of size 8 at addr ffff88806c815a80 by task syz-executor.0/20132 [ 459.352347] [ 459.352594] CPU: 0 PID: 20132 Comm: syz-executor.0 Not tainted 4.19.90 #2 [ 459.353628] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 459.354947] Call Trace: [ 459.355337] dump_stack+0x111/0x19e [ 459.355879] ? __lock_acquire+0x24c1/0x31b0 [ 459.356523] print_address_description+0x60/0x223 [ 459.357248] ? __lock_acquire+0x24c1/0x31b0 [ 459.357887] kasan_report.cold+0xae/0x2d8 [ 459.358503] __lock_acquire+0x24c1/0x31b0 [ 459.359120] ? _raw_spin_unlock_irq+0x24/0x40 [ 459.359784] ? lockdep_hardirqs_on+0x37b/0x580 [ 459.360465] ? _raw_spin_unlock_irq+0x24/0x40 [ 459.361123] ? finish_task_switch+0x125/0x600 [ 459.361812] ? finish_task_switch+0xee/0x600 [ 459.362471] ? mark_held_locks+0xf0/0xf0 [ 459.363108] ? __schedule+0x96f/0x21d0 [ 459.363716] lock_acquire+0x111/0x320 [ 459.364285] ? blkdev_get+0xce/0xbe0 [ 459.364846] ? blkdev_get+0xce/0xbe0 [ 459.365390] __mutex_lock+0xf9/0x12a0 [ 459.365948] ? blkdev_get+0xce/0xbe0 [ 459.366493] ? bdev_evict_inode+0x1f0/0x1f0 [ 459.367130] ? blkdev_get+0xce/0xbe0 [ 459.367678] ? destroy_inode+0xbc/0x110 [ 459.368261] ? mutex_trylock+0x1a0/0x1a0 [ 459.368867] ? __blkdev_get+0x3e6/0x1280 [ 459.369463] ? bdev_disk_changed+0x1d0/0x1d0 [ 459.370114] ? blkdev_get+0xce/0xbe0 [ 459.370656] blkdev_get+0xce/0xbe0 [ 459.371178] ? find_held_lock+0x2c/0x110 [ 459.371774] ? __blkdev_get+0x1280/0x1280 [ 459.372383] ? lock_downgrade+0x680/0x680 [ 459.373002] ? lock_acquire+0x111/0x320 [ 459.373587] ? bd_acquire+0x21/0x2c0 [ 459.374134] ? do_raw_spin_unlock+0x4f/0x250 [ 459.374780] blkdev_open+0x202/0x290 [ 459.375325] do_dentry_open+0x49e/0x1050 [ 459.375924] ? blkdev_get_by_dev+0x70/0x70 [ 459.376543] ? __x64_sys_fchdir+0x1f0/0x1f0 [ 459.377192] ? inode_permission+0xbe/0x3a0 [ 459.377818] path_openat+0x148c/0x3f50 [ 459.378392] ? kmem_cache_alloc+0xd5/0x280 [ 459.379016] ? entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 459.379802] ? path_lookupat.isra.0+0x900/0x900 [ 459.380489] ? __lock_is_held+0xad/0x140 [ 459.381093] do_filp_open+0x1a1/0x280 [ 459.381654] ? may_open_dev+0xf0/0xf0 [ 459.382214] ? find_held_lock+0x2c/0x110 [ 459.382816] ? lock_downgrade+0x680/0x680 [ 459.383425] ? __lock_is_held+0xad/0x140 [ 459.384024] ? do_raw_spin_unlock+0x4f/0x250 [ 459.384668] ? _raw_spin_unlock+0x1f/0x30 [ 459.385280] ? __alloc_fd+0x448/0x560 [ 459.385841] do_sys_open+0x3c3/0x500 [ 459.386386] ? filp_open+0x70/0x70 [ 459.386911] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 459.387610] ? trace_hardirqs_off_caller+0x55/0x1c0 [ 459.388342] ? do_syscall_64+0x1a/0x520 [ 459.388930] do_syscall_64+0xc3/0x520 [ 459.389490] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 459.390248] RIP: 0033:0x416211 [ 459.390720] Code: 75 14 b8 02 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 04 19 00 00 c3 48 83 ec 08 e8 0a fa ff ff 48 89 04 24 b8 02 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 53 fa ff ff 48 89 d0 48 83 c4 08 48 3d 01 [ 459.393483] RSP: 002b:00007fe45dfe9a60 EFLAGS: 00000293 ORIG_RAX: 0000000000000002 [ 459.394610] RAX: ffffffffffffffda RBX: 00007fe45dfea6d4 RCX: 0000000000416211 [ 459.395678] RDX: 00007fe45dfe9b0a RSI: 0000000000000002 RDI: 00007fe45dfe9b00 [ 459.396758] RBP: 000000000076bf20 R08: 0000000000000000 R09: 000000000000000a [ 459.397930] R10: 0000000000000075 R11: 0000000000000293 R12: 00000000ffffffff [ 459.399022] R13: 0000000000000bd9 R14: 00000000004cdb80 R15: 000000000076bf2c [ 459.400168] [ 459.400430] Allocated by task 20132: [ 459.401038] kasan_kmalloc+0xbf/0xe0 [ 459.401652] kmem_cache_alloc+0xd5/0x280 [ 459.402330] bdev_alloc_inode+0x18/0x40 [ 459.402970] alloc_inode+0x5f/0x180 [ 459.403510] iget5_locked+0x57/0xd0 [ 459.404095] bdget+0x94/0x4e0 [ 459.404607] bd_acquire+0xfa/0x2c0 [ 459.405113] blkdev_open+0x110/0x290 [ 459.405702] do_dentry_open+0x49e/0x1050 [ 459.406340] path_openat+0x148c/0x3f50 [ 459.406926] do_filp_open+0x1a1/0x280 [ 459.407471] do_sys_open+0x3c3/0x500 [ 459.408010] do_syscall_64+0xc3/0x520 [ 459.408572] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 459.409415] [ 459.409679] Freed by task 1262: [ 459.410212] __kasan_slab_free+0x129/0x170 [ 459.410919] kmem_cache_free+0xb2/0x2a0 [ 459.411564] rcu_process_callbacks+0xbb2/0x2320 [ 459.412318] __do_softirq+0x225/0x8ac Fix this by delaying bdput() to the end of blkdev_get() which means we have finished accessing bdev. Fixes: 77ea887e433a ("implement in-kernel gendisk events handling") Reported-by: Hulk Robot Signed-off-by: Jason Yan Tested-by: Sedat Dilek Reviewed-by: Jan Kara Reviewed-by: Christoph Hellwig Reviewed-by: Dan Carpenter Cc: Christoph Hellwig Cc: Jens Axboe Cc: Ming Lei Cc: Jan Kara Cc: Dan Carpenter Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 9517bec2c1ff8f223f8f2d28c743731e8f216bbe Author: Zhiqiang Liu Date: Mon Jun 15 00:53:30 2020 +0800 bcache: fix potential deadlock problem in btree_gc_coalesce [ Upstream commit be23e837333a914df3f24bf0b32e87b0331ab8d1 ] coccicheck reports: drivers/md//bcache/btree.c:1538:1-7: preceding lock on line 1417 In btree_gc_coalesce func, if the coalescing process fails, we will goto to out_nocoalesce tag directly without releasing new_nodes[i]->write_lock. Then, it will cause a deadlock when trying to acquire new_nodes[i]-> write_lock for freeing new_nodes[i] before return. btree_gc_coalesce func details as follows: if alloc new_nodes[i] fails: goto out_nocoalesce; // obtain new_nodes[i]->write_lock mutex_lock(&new_nodes[i]->write_lock) // main coalescing process for (i = nodes - 1; i > 0; --i) [snipped] if coalescing process fails: // Here, directly goto out_nocoalesce // tag will cause a deadlock goto out_nocoalesce; [snipped] // release new_nodes[i]->write_lock mutex_unlock(&new_nodes[i]->write_lock) // coalesing succ, return return; out_nocoalesce: btree_node_free(new_nodes[i]) // free new_nodes[i] // obtain new_nodes[i]->write_lock mutex_lock(&new_nodes[i]->write_lock); // set flag for reuse clear_bit(BTREE_NODE_dirty, &ew_nodes[i]->flags); // release new_nodes[i]->write_lock mutex_unlock(&new_nodes[i]->write_lock); To fix the problem, we add a new tag 'out_unlock_nocoalesce' for releasing new_nodes[i]->write_lock before out_nocoalesce tag. If coalescing process fails, we will go to out_unlock_nocoalesce tag for releasing new_nodes[i]->write_lock before free new_nodes[i] in out_nocoalesce tag. (Coly Li helps to clean up commit log format.) Fixes: 2a285686c109816 ("bcache: btree locking rework") Signed-off-by: Zhiqiang Liu Signed-off-by: Coly Li Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit d3e4550ee3eb22f67ae63eeb188c9443cf745f61 Author: Gaurav Singh Date: Mon Jun 8 13:18:17 2020 -0300 perf report: Fix NULL pointer dereference in hists__fprintf_nr_sample_events() [ Upstream commit 11b6e5482e178055ec1f2444b55f2518713809d1 ] The 'evname' variable can be NULL, as it is checked a few lines back, check it before using. Fixes: 9e207ddfa207 ("perf report: Show call graph from reference events") Cc: Adrian Hunter Cc: Alexander Shishkin Cc: Ingo Molnar Cc: Jiri Olsa Cc: Kan Liang Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lore.kernel.org/lkml/ Signed-off-by: Gaurav Singh Signed-off-by: Sasha Levin commit 13af14dfadcb95030dc8e2e0cacbffc1990a9772 Author: Qais Yousef Date: Mon May 18 16:49:31 2020 +0100 usb/ehci-platform: Set PM runtime as active on resume [ Upstream commit 16bdc04cc98ab0c74392ceef2475ecc5e73fcf49 ] Follow suit of ohci-platform.c and perform pm_runtime_set_active() on resume. ohci-platform.c had a warning reported due to the missing pm_runtime_set_active() [1]. [1] https://lore.kernel.org/lkml/20200323143857.db5zphxhq4hz3hmd@e107158-lin.cambridge.arm.com/ Acked-by: Alan Stern Signed-off-by: Qais Yousef CC: Tony Prisk CC: Greg Kroah-Hartman CC: Mathias Nyman CC: Oliver Neukum CC: linux-arm-kernel@lists.infradead.org CC: linux-usb@vger.kernel.org CC: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20200518154931.6144-3-qais.yousef@arm.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 737c975db35b0117fc5c702072ca2df6f2f7eb63 Author: Qais Yousef Date: Mon May 18 16:49:30 2020 +0100 usb/xhci-plat: Set PM runtime as active on resume [ Upstream commit 79112cc3c29f4a8c73a21428fbcbcb0afb005e3e ] Follow suit of ohci-platform.c and perform pm_runtime_set_active() on resume. ohci-platform.c had a warning reported due to the missing pm_runtime_set_active() [1]. [1] https://lore.kernel.org/lkml/20200323143857.db5zphxhq4hz3hmd@e107158-lin.cambridge.arm.com/ Signed-off-by: Qais Yousef CC: Tony Prisk CC: Greg Kroah-Hartman CC: Mathias Nyman CC: Oliver Neukum CC: linux-arm-kernel@lists.infradead.org CC: linux-usb@vger.kernel.org CC: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20200518154931.6144-2-qais.yousef@arm.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 4d046d7147dafed8d40f9bbd52a7f000191b9f7b Author: Christophe JAILLET Date: Sat May 30 10:16:22 2020 +0200 scsi: acornscsi: Fix an error handling path in acornscsi_probe() [ Upstream commit 42c76c9848e13dbe0538d7ae0147a269dfa859cb ] 'ret' is known to be 0 at this point. Explicitly return -ENOMEM if one of the 'ecardm_iomap()' calls fail. Link: https://lore.kernel.org/r/20200530081622.577888-1-christophe.jaillet@wanadoo.fr Fixes: e95a1b656a98 ("[ARM] rpc: acornscsi: update to new style ecard driver") Signed-off-by: Christophe JAILLET Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 7f5c8bd3a29a8a5773f733adb4f45168ac50e42d Author: tannerlove Date: Mon Jun 8 15:37:15 2020 -0400 selftests/net: in timestamping, strncpy needs to preserve null byte [ Upstream commit 8027bc0307ce59759b90679fa5d8b22949586d20 ] If user passed an interface option longer than 15 characters, then device.ifr_name and hwtstamp.ifr_name became non-null-terminated strings. The compiler warned about this: timestamping.c:353:2: warning: ‘strncpy’ specified bound 16 equals \ destination size [-Wstringop-truncation] 353 | strncpy(device.ifr_name, interface, sizeof(device.ifr_name)); Fixes: cb9eff097831 ("net: new user space API for time stamping of incoming and outgoing packets") Signed-off-by: Tanner Love Acked-by: Willem de Bruijn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 7e5c47b8f4e5632f1c0129717dd2251335aa342b Author: Nick Desaulniers Date: Thu Jun 4 16:50:49 2020 -0700 elfnote: mark all .note sections SHF_ALLOC [ Upstream commit 51da9dfb7f20911ae4e79e9b412a9c2d4c373d4b ] ELFNOTE_START allows callers to specify flags for .pushsection assembler directives. All callsites but ELF_NOTE use "a" for SHF_ALLOC. For vdso's that explicitly use ELF_NOTE_START and BUILD_SALT, the same section is specified twice after preprocessing, once with "a" flag, once without. Example: .pushsection .note.Linux, "a", @note ; .pushsection .note.Linux, "", @note ; While GNU as allows this ordering, it warns for the opposite ordering, making these directives position dependent. We'd prefer not to precisely match this behavior in Clang's integrated assembler. Instead, the non __ASSEMBLY__ definition of ELF_NOTE uses __attribute__((section(".note.Linux"))) which is created with SHF_ALLOC, so let's make the __ASSEMBLY__ definition of ELF_NOTE consistent with C and just always use "a" flag. This allows Clang to assemble a working mainline (5.6) kernel via: $ make CC=clang AS=clang Signed-off-by: Nick Desaulniers Signed-off-by: Andrew Morton Reviewed-by: Nathan Chancellor Reviewed-by: Fangrui Song Cc: Jeremy Fitzhardinge Cc: Thomas Gleixner Cc: Vincenzo Frascino Link: https://github.com/ClangBuiltLinux/linux/issues/913 Link: http://lkml.kernel.org/r/20200325231250.99205-1-ndesaulniers@google.com Debugged-by: Ilie Halip Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit b656010d1a06d2f63999148fb0966e2a89dec0a5 Author: Arnd Bergmann Date: Thu Jun 4 16:50:30 2020 -0700 include/linux/bitops.h: avoid clang shift-count-overflow warnings [ Upstream commit bd93f003b7462ae39a43c531abca37fe7073b866 ] Clang normally does not warn about certain issues in inline functions when it only happens in an eliminated code path. However if something else goes wrong, it does tend to complain about the definition of hweight_long() on 32-bit targets: include/linux/bitops.h:75:41: error: shift count >= width of type [-Werror,-Wshift-count-overflow] return sizeof(w) == 4 ? hweight32(w) : hweight64(w); ^~~~~~~~~~~~ include/asm-generic/bitops/const_hweight.h:29:49: note: expanded from macro 'hweight64' define hweight64(w) (__builtin_constant_p(w) ? __const_hweight64(w) : __arch_hweight64(w)) ^~~~~~~~~~~~~~~~~~~~ include/asm-generic/bitops/const_hweight.h:21:76: note: expanded from macro '__const_hweight64' define __const_hweight64(w) (__const_hweight32(w) + __const_hweight32((w) >> 32)) ^ ~~ include/asm-generic/bitops/const_hweight.h:20:49: note: expanded from macro '__const_hweight32' define __const_hweight32(w) (__const_hweight16(w) + __const_hweight16((w) >> 16)) ^ include/asm-generic/bitops/const_hweight.h:19:72: note: expanded from macro '__const_hweight16' define __const_hweight16(w) (__const_hweight8(w) + __const_hweight8((w) >> 8 )) ^ include/asm-generic/bitops/const_hweight.h:12:9: note: expanded from macro '__const_hweight8' (!!((w) & (1ULL << 2))) + \ Adding an explicit cast to __u64 avoids that warning and makes it easier to read other output. Signed-off-by: Arnd Bergmann Signed-off-by: Andrew Morton Acked-by: Christian Brauner Cc: Andy Shevchenko Cc: Rasmus Villemoes Cc: Josh Poimboeuf Cc: Nick Desaulniers Link: http://lkml.kernel.org/r/20200505135513.65265-1-arnd@arndb.de Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit f0db9a64341877c98eb3ed4f42c1a44c755b50a9 Author: Jann Horn Date: Thu Jun 4 16:50:17 2020 -0700 lib/zlib: remove outdated and incorrect pre-increment optimization [ Upstream commit acaab7335bd6f0c0b54ce3a00bd7f18222ce0f5f ] The zlib inflate code has an old micro-optimization based on the assumption that for pre-increment memory accesses, the compiler will generate code that fits better into the processor's pipeline than what would be generated for post-increment memory accesses. This optimization was already removed in upstream zlib in 2016: https://github.com/madler/zlib/commit/9aaec95e8211 This optimization causes UB according to C99, which says in section 6.5.6 "Additive operators": "If both the pointer operand and the result point to elements of the same array object, or one past the last element of the array object, the evaluation shall not produce an overflow; otherwise, the behavior is undefined". This UB is not only a theoretical concern, but can also cause trouble for future work on compiler-based sanitizers. According to the zlib commit, this optimization also is not optimal anymore with modern compilers. Replace uses of OFF, PUP and UP_UNALIGNED with their definitions in the POSTINC case, and remove the macro definitions, just like in the upstream patch. Signed-off-by: Jann Horn Signed-off-by: Andrew Morton Cc: Mikhail Zaslonko Link: http://lkml.kernel.org/r/20200507123112.252723-1-jannh@google.com Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit d9aa44efed5e656f543e6af54f215eadeb33f054 Author: Qiushi Wu Date: Thu May 28 15:13:53 2020 -0500 scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj [ Upstream commit 0267ffce562c8bbf9b57ebe0e38445ad04972890 ] kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Link: https://lore.kernel.org/r/20200528201353.14849-1-wu000273@umn.edu Reviewed-by: Lee Duncan Signed-off-by: Qiushi Wu Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 536fd514b3be22ee6f2261a3905169046aa86794 Author: Bob Peterson Date: Wed Apr 29 08:45:54 2020 -0500 gfs2: Allow lock_nolock mount to specify jid=X [ Upstream commit ea22eee4e6027d8927099de344f7fff43c507ef9 ] Before this patch, a simple typo accidentally added \n to the jid= string for lock_nolock mounts. This made it impossible to mount a gfs2 file system with a journal other than journal0. Thus: mount -tgfs2 -o hostdata="jid=1" Resulted in: mount: wrong fs type, bad option, bad superblock on In most cases this is not a problem. However, for debugging and testing purposes we sometimes want to test the integrity of other journals. This patch removes the unnecessary \n and thus allows lock_nolock users to specify an alternate journal. Signed-off-by: Bob Peterson Signed-off-by: Andreas Gruenbacher Signed-off-by: Sasha Levin commit d9f4137a16019edf7d0e8b07ae83921884b2f4c9 Author: Stafford Horne Date: Wed Apr 22 20:24:11 2020 +0900 openrisc: Fix issue with argument clobbering for clone/fork [ Upstream commit 6bd140e14d9aaa734ec37985b8b20a96c0ece948 ] Working on the OpenRISC glibc port I found that sometimes clone was working strange. That the tls data argument sent in r7 was always wrong. Further investigation revealed that the arguments were getting clobbered in the entry code. This patch removes the code that writes to the argument registers. This was likely due to some old code hanging around. This patch fixes this up for clone and fork. This fork clobber is harmless but also useless so remove. Signed-off-by: Stafford Horne Signed-off-by: Sasha Levin commit 0e8108e0556b6353fd6ea0dda68ccba43d4ce8a2 Author: Xiyu Yang Date: Mon May 25 22:12:46 2020 +0800 ASoC: fsl_asrc_dma: Fix dma_chan leak when config DMA channel failed [ Upstream commit 36124fb19f1ae68a500cd76a76d40c6e81bee346 ] fsl_asrc_dma_hw_params() invokes dma_request_channel() or fsl_asrc_get_dma_channel(), which returns a reference of the specified dma_chan object to "pair->dma_chan[dir]" with increased refcnt. The reference counting issue happens in one exception handling path of fsl_asrc_dma_hw_params(). When config DMA channel failed for Back-End, the function forgets to decrease the refcnt increased by dma_request_channel() or fsl_asrc_get_dma_channel(), causing a refcnt leak. Fix this issue by calling dma_release_channel() when config DMA channel failed. Signed-off-by: Xiyu Yang Signed-off-by: Xin Tan Link: https://lore.kernel.org/r/1590415966-52416-1-git-send-email-xiyuyang19@fudan.edu.cn Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit c90c6ac8fbe9d7b93357fd433d606cf510001bc8 Author: Fedor Tokarev Date: Sat Mar 28 14:56:55 2020 +0300 net: sunrpc: Fix off-by-one issues in 'rpc_ntop6' [ Upstream commit 118917d696dc59fd3e1741012c2f9db2294bed6f ] Fix off-by-one issues in 'rpc_ntop6': - 'snprintf' returns the number of characters which would have been written if enough space had been available, excluding the terminating null byte. Thus, a return value of 'sizeof(scopebuf)' means that the last character was dropped. - 'strcat' adds a terminating null byte to the string, thus if len == buflen, the null byte is written past the end of the buffer. Signed-off-by: Fedor Tokarev Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin commit 4e26dd5e3f6746efbc681824360e680b02b76174 Author: Qiushi Wu Date: Fri May 22 23:06:25 2020 -0500 usb: gadget: fix potential double-free in m66592_probe. [ Upstream commit 44734a594196bf1d474212f38fe3a0d37a73278b ] m66592_free_request() is called under label "err_add_udc" and "clean_up", and m66592->ep0_req is not set to NULL after first free, leading to a double-free. Fix this issue by setting m66592->ep0_req to NULL after the first free. Fixes: 0f91349b89f3 ("usb: gadget: convert all users to the new udc infrastructure") Signed-off-by: Qiushi Wu Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin commit c16f825fb0a34439414aab5b8f4a30b35656300e Author: Colin Ian King Date: Thu May 21 16:13:00 2020 +0100 usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check [ Upstream commit eafa80041645cd7604c4357b1a0cd4a3c81f2227 ] Currently pointer ep is being dereferenced before it is null checked leading to a null pointer dereference issue. Fix this by only assigning pointer udc once ep is known to be not null. Also remove a debug message that requires a valid udc which may not be possible at that point. Addresses-Coverity: ("Dereference before null check") Fixes: 24a28e428351 ("USB: gadget driver for LPC32xx") Signed-off-by: Colin Ian King Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin commit 8537aebb89b68f187f79ceaef8be7ac4315eeab5 Author: Nathan Chancellor Date: Thu Apr 23 09:29:24 2020 -0700 USB: gadget: udc: s3c2410_udc: Remove pointless NULL check in s3c2410_udc_nuke [ Upstream commit 7a0fbcf7c308920bc6116b3a5fb21c8cc5fec128 ] Clang warns: drivers/usb/gadget/udc/s3c2410_udc.c:255:11: warning: comparison of address of 'ep->queue' equal to a null pointer is always false [-Wtautological-pointer-compare] if (&ep->queue == NULL) ~~~~^~~~~ ~~~~ 1 warning generated. It is not wrong, queue is not a pointer so if ep is not NULL, the address of queue cannot be NULL. No other driver does a check like this and this check has been around since the driver was first introduced, presumably with no issues so it does not seem like this check should be something else. Just remove it. Commit afe956c577b2d ("kbuild: Enable -Wtautological-compare") exposed this but it is not the root cause of the warning. Fixes: 3fc154b6b8134 ("USB Gadget driver for Samsung s3c2410 ARM SoC") Link: https://github.com/ClangBuiltLinux/linux/issues/1004 Reviewed-by: Nick Desaulniers Reported-by: kbuild test robot Signed-off-by: Nathan Chancellor Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin commit b952f0537778882d8ef3b1b4ee4fe1d68e6a8d6d Author: Fabrice Gasnier Date: Thu Apr 23 13:55:53 2020 +0200 usb: dwc2: gadget: move gadget resume after the core is in L0 state [ Upstream commit 8c935deacebb8fac8f41378701eb79d12f3c2e2d ] When the remote wakeup interrupt is triggered, lx_state is resumed from L2 to L0 state. But when the gadget resume is called, lx_state is still L2. This prevents the resume callback to queue any request. Any attempt to queue a request from resume callback will result in: - "submit request only in active state" debug message to be issued - dwc2_hsotg_ep_queue() returns -EAGAIN Call the gadget resume routine after the core is in L0 state. Fixes: f81f46e1f530 ("usb: dwc2: implement hibernation during bus suspend/resume") Acked-by: Minas Harutyunyan Signed-off-by: Fabrice Gasnier Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin commit 720e91f8a2a74552d2c3849a9158032345b79200 Author: Stefan Riedmueller Date: Fri Apr 3 15:07:28 2020 +0200 watchdog: da9062: No need to ping manually before setting timeout [ Upstream commit a0948ddba65f4f6d3cfb5e2b84685485d0452966 ] There is actually no need to ping the watchdog before disabling it during timeout change. Disabling the watchdog already takes care of resetting the counter. This fixes an issue during boot when the userspace watchdog handler takes over and the watchdog is already running. Opening the watchdog in this case leads to the first ping and directly after that without the required heartbeat delay a second ping issued by the set_timeout call. Due to the missing delay this resulted in a reset. Signed-off-by: Stefan Riedmueller Reviewed-by: Guenter Roeck Reviewed-by: Adam Thomson Link: https://lore.kernel.org/r/20200403130728.39260-3-s.riedmueller@phytec.de Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Sasha Levin commit 7ad6b32e01ffe5caaf8c7278a14f49c13f5ff276 Author: Marek Szyprowski Date: Tue May 19 12:26:52 2020 +0200 clk: samsung: exynos5433: Add IGNORE_UNUSED flag to sclk_i2s1 [ Upstream commit 25bdae0f1c6609ceaf55fe6700654f0be2253d8e ] Mark the SCLK clock for Exynos5433 I2S1 device with IGNORE_UNUSED flag to match its behaviour with SCLK clock for AUD_I2S (I2S0) device until a proper fix for Exynos I2S driver is ready. This fixes the following synchronous abort issue revealed by the probe order change caused by the commit 93d2e4322aa7 ("of: platform: Batch fwnode parsing when adding all top level devices") Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 50 Comm: kworker/0:1 Not tainted 5.7.0-rc5+ #701 Hardware name: Samsung TM2E board (DT) Workqueue: events deferred_probe_work_func pstate: 60000005 (nZCv daif -PAN -UAO) pc : samsung_i2s_probe+0x768/0x8f0 lr : samsung_i2s_probe+0x688/0x8f0 ... Call trace: samsung_i2s_probe+0x768/0x8f0 platform_drv_probe+0x50/0xa8 really_probe+0x108/0x370 driver_probe_device+0x54/0xb8 __device_attach_driver+0x90/0xc0 bus_for_each_drv+0x70/0xc8 __device_attach+0xdc/0x140 device_initial_probe+0x10/0x18 bus_probe_device+0x94/0xa0 deferred_probe_work_func+0x70/0xa8 process_one_work+0x2a8/0x718 worker_thread+0x48/0x470 kthread+0x134/0x160 ret_from_fork+0x10/0x1c Code: 17ffffaf d503201f f94086c0 91003000 (88dffc00) ---[ end trace ccf721c9400ddbd6 ]--- Signed-off-by: Marek Szyprowski Signed-off-by: Sylwester Nawrocki Signed-off-by: Sasha Levin commit 091f9ba81da94ecd14ede95644a7e42c2e5a8370 Author: Gregory CLEMENT Date: Mon May 18 10:45:13 2020 +0200 tty: n_gsm: Fix bogus i++ in gsm_data_kick [ Upstream commit 4dd31f1ffec6c370c3c2e0c605628bf5e16d5c46 ] When submitting the previous fix "tty: n_gsm: Fix waking up upper tty layer when room available". It was suggested to switch from a while to a for loop, but when doing it, there was a remaining bogus i++. This patch removes this i++ and also reorganizes the code making it more compact. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Signed-off-by: Gregory CLEMENT Link: https://lore.kernel.org/r/20200518084517.2173242-3-gregory.clement@bootlin.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit ec4bff3f0604b6d0134c18244b02ce0309965520 Author: Tang Bin Date: Wed May 13 21:26:47 2020 +0800 USB: host: ehci-mxc: Add error handling in ehci_mxc_drv_probe() [ Upstream commit d49292025f79693d3348f8e2029a8b4703be0f0a ] The function ehci_mxc_drv_probe() does not perform sufficient error checking after executing platform_get_irq(), thus fix it. Fixes: 7e8d5cd93fac ("USB: Add EHCI support for MX27 and MX31 based boards") Signed-off-by: Zhang Shengju Signed-off-by: Tang Bin Reviewed-by: Peter Chen Link: https://lore.kernel.org/r/20200513132647.5456-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 652def4c63b99029fe8b898740f97329c26a2fd3 Author: Qais Yousef Date: Mon May 18 16:49:29 2020 +0100 usb/ohci-platform: Fix a warning when hibernating [ Upstream commit 1cb3b0095c3d0bb96912bfbbce4fc006d41f367c ] The following warning was observed when attempting to suspend to disk using a USB flash as a swap device. [ 111.779649] ------------[ cut here ]------------ [ 111.788382] URB (____ptrval____) submitted while active [ 111.796646] WARNING: CPU: 3 PID: 365 at drivers/usb/core/urb.c:363 usb_submit_urb+0x3d8/0x590 [ 111.805417] Modules linked in: [ 111.808584] CPU: 3 PID: 365 Comm: kworker/3:2 Not tainted 5.6.0-rc6-00002-gdfd1731f9a3e-dirty #545 [ 111.817796] Hardware name: ARM Juno development board (r2) (DT) [ 111.823896] Workqueue: usb_hub_wq hub_event [ 111.828217] pstate: 60000005 (nZCv daif -PAN -UAO) [ 111.833156] pc : usb_submit_urb+0x3d8/0x590 [ 111.837471] lr : usb_submit_urb+0x3d8/0x590 [ 111.841783] sp : ffff800018de38b0 [ 111.845205] x29: ffff800018de38b0 x28: 0000000000000003 [ 111.850682] x27: ffff000970530b20 x26: ffff8000133fd000 [ 111.856159] x25: ffff8000133fd000 x24: ffff800018de3b38 [ 111.861635] x23: 0000000000000004 x22: 0000000000000c00 [ 111.867112] x21: 0000000000000000 x20: 00000000fffffff0 [ 111.872589] x19: ffff0009704e7a00 x18: ffffffffffffffff [ 111.878065] x17: 00000000a7c8f4bc x16: 000000002af33de8 [ 111.883542] x15: ffff8000133fda88 x14: 0720072007200720 [ 111.889019] x13: 0720072007200720 x12: 0720072007200720 [ 111.894496] x11: 0000000000000000 x10: 00000000a5286134 [ 111.899973] x9 : 0000000000000002 x8 : ffff000970c837a0 [ 111.905449] x7 : 0000000000000000 x6 : ffff800018de3570 [ 111.910926] x5 : 0000000000000001 x4 : 0000000000000003 [ 111.916401] x3 : 0000000000000000 x2 : ffff800013427118 [ 111.921879] x1 : 9d4e965b4b7d7c00 x0 : 0000000000000000 [ 111.927356] Call trace: [ 111.929892] usb_submit_urb+0x3d8/0x590 [ 111.933852] hub_activate+0x108/0x7f0 [ 111.937633] hub_resume+0xac/0x148 [ 111.941149] usb_resume_interface.isra.10+0x60/0x138 [ 111.946265] usb_resume_both+0xe4/0x140 [ 111.950225] usb_runtime_resume+0x24/0x30 [ 111.954365] __rpm_callback+0xdc/0x138 [ 111.958236] rpm_callback+0x34/0x98 [ 111.961841] rpm_resume+0x4a8/0x720 [ 111.965445] rpm_resume+0x50c/0x720 [ 111.969049] __pm_runtime_resume+0x4c/0xb8 [ 111.973276] usb_autopm_get_interface+0x28/0x60 [ 111.977948] hub_event+0x80/0x16d8 [ 111.981466] process_one_work+0x2a4/0x748 [ 111.985604] worker_thread+0x48/0x498 [ 111.989387] kthread+0x13c/0x140 [ 111.992725] ret_from_fork+0x10/0x18 [ 111.996415] irq event stamp: 354 [ 111.999756] hardirqs last enabled at (353): [] console_unlock+0x504/0x5b8 [ 112.008441] hardirqs last disabled at (354): [] do_debug_exception+0x1a8/0x258 [ 112.017479] softirqs last enabled at (350): [] __do_softirq+0x4bc/0x568 [ 112.025984] softirqs last disabled at (343): [] irq_exit+0x144/0x150 [ 112.034129] ---[ end trace dc96030b9cf6c8a3 ]--- The problem was tracked down to a missing call to pm_runtime_set_active() on resume in ohci-platform. Link: https://lore.kernel.org/lkml/20200323143857.db5zphxhq4hz3hmd@e107158-lin.cambridge.arm.com/ Acked-by: Alan Stern Signed-off-by: Qais Yousef CC: Tony Prisk CC: Greg Kroah-Hartman CC: Mathias Nyman CC: Oliver Neukum CC: linux-arm-kernel@lists.infradead.org CC: linux-usb@vger.kernel.org CC: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20200518154931.6144-1-qais.yousef@arm.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 2fbc2166f7ed243e9b0e511df2b93380999d71fe Author: Alex Williamson Date: Wed Apr 8 11:45:28 2020 -0600 vfio-pci: Mask cap zero [ Upstream commit bc138db1b96264b9c1779cf18d5a3b186aa90066 ] The PCI Code and ID Assignment Specification changed capability ID 0 from reserved to a NULL capability in the v1.1 revision. The NULL capability is defined to include only the 16-bit capability header, ie. only the ID and next pointer. Unfortunately vfio-pci creates a map of config space, where ID 0 is used to reserve the standard type 0 header. Finding an actual capability with this ID therefore results in a bogus range marked in that map and conflicts with subsequent capabilities. As this seems to be a dummy capability anyway and we already support dropping capabilities, let's hide this one rather than delving into the potentially subtle dependencies within our map. Seen on an NVIDIA Tesla T4. Reviewed-by: Cornelia Huck Signed-off-by: Alex Williamson Signed-off-by: Sasha Levin commit 4d99f432ca2b888503a41133304b610372e0ce91 Author: Geoff Levand Date: Sat May 9 18:58:32 2020 +0000 powerpc/ps3: Fix kexec shutdown hang [ Upstream commit 126554465d93b10662742128918a5fc338cda4aa ] The ps3_mm_region_destroy() and ps3_mm_vas_destroy() routines are called very late in the shutdown via kexec's mmu_cleanup_all routine. By the time mmu_cleanup_all runs it is too late to use udbg_printf, and calling it will cause PS3 systems to hang. Remove all debugging statements from ps3_mm_region_destroy() and ps3_mm_vas_destroy() and replace any error reporting with calls to lv1_panic. With this change builds with 'DEBUG' defined will not cause kexec reboots to hang, and builds with 'DEBUG' defined or not will end in lv1_panic if an error is encountered. Signed-off-by: Geoff Levand Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/7325c4af2b4c989c19d6a26b90b1fec9c0615ddf.1589049250.git.geoff@infradead.org Signed-off-by: Sasha Levin commit aa6849125abc13f771c038aac5d6e238e3557b16 Author: Nicholas Piggin Date: Fri May 8 14:33:58 2020 +1000 powerpc/pseries/ras: Fix FWNMI_VALID off by one [ Upstream commit deb70f7a35a22dffa55b2c3aac71bc6fb0f486ce ] This was discovered developing qemu fwnmi sreset support. This off-by-one bug means the last 16 bytes of the rtas area can not be used for a 16 byte save area. It's not a serious bug, and QEMU implementation has to retain a workaround for old kernels, but it's good to tighten it. Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman Acked-by: Mahesh Salgaonkar Link: https://lore.kernel.org/r/20200508043408.886394-7-npiggin@gmail.com Signed-off-by: Sasha Levin commit b0b95ad66ac27fc88725fcd23800dcfcb90605ce Author: Gregory CLEMENT Date: Tue May 12 13:53:23 2020 +0200 tty: n_gsm: Fix waking up upper tty layer when room available [ Upstream commit 01dbb362f0a114fbce19c8abe4cd6f4710e934d5 ] Warn the upper layer when n_gms is ready to receive data again. Without this the associated virtual tty remains blocked indefinitely. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Signed-off-by: Gregory CLEMENT Link: https://lore.kernel.org/r/20200512115323.1447922-4-gregory.clement@bootlin.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit eeeb7a2b11eb43d6296e3c5d4794bd4c2833d0d4 Author: Gregory CLEMENT Date: Tue May 12 13:53:22 2020 +0200 tty: n_gsm: Fix SOF skipping [ Upstream commit 84d6f81c1fb58b56eba81ff0a36cf31946064b40 ] For at least some modems like the TELIT LE910, skipping SOF makes transfers blocking indefinitely after a short amount of data transferred. Given the small improvement provided by skipping the SOF (just one byte on about 100 bytes), it seems better to completely remove this "feature" than make it optional. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Signed-off-by: Gregory CLEMENT Link: https://lore.kernel.org/r/20200512115323.1447922-3-gregory.clement@bootlin.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 820fd4a6a1ea9b3fda8a94e74c270e271da06354 Author: Tero Kristo Date: Wed Apr 29 16:13:39 2020 +0300 clk: ti: composite: fix memory leak [ Upstream commit c7c1cbbc9217ebb5601b88d138d4a5358548de9d ] The parent_names is never released for a component clock definition, causing some memory leak. Fix by releasing it once it is no longer needed. Reported-by: Tomi Valkeinen Signed-off-by: Tero Kristo Link: https://lkml.kernel.org/r/20200429131341.4697-2-t-kristo@ti.com Acked-by: Tony Lindgren Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin commit 21e382b30138493f1ff3ca760d520c7e4e6b1c5b Author: Arnd Bergmann Date: Thu May 7 23:34:28 2020 +0200 dlm: remove BUG() before panic() [ Upstream commit fe204591cc9480347af7d2d6029b24a62e449486 ] Building a kernel with clang sometimes fails with an objtool error in dlm: fs/dlm/lock.o: warning: objtool: revert_lock_pc()+0xbd: can't find jump dest instruction at .text+0xd7fc The problem is that BUG() never returns and the compiler knows that anything after it is unreachable, however the panic still emits some code that does not get fully eliminated. Having both BUG() and panic() is really pointless as the BUG() kills the current process and the subsequent panic() never hits. In most cases, we probably don't really want either and should replace the DLM_ASSERT() statements with WARN_ON(), as has been done for some of them. Remove the BUG() here so the user at least sees the panic message and we can reliably build randconfig kernels. Fixes: e7fd41792fc0 ("[DLM] The core of the DLM for GFS2/CLVM") Cc: Josh Poimboeuf Cc: clang-built-linux@googlegroups.com Signed-off-by: Arnd Bergmann Signed-off-by: David Teigland Signed-off-by: Sasha Levin commit d7b4327783f64afca0c134edb1994c5351d2b7c3 Author: Suganath Prabu S Date: Fri May 8 07:07:38 2020 -0400 scsi: mpt3sas: Fix double free warnings [ Upstream commit cbbfdb2a2416c9f0cde913cf09670097ac281282 ] Fix following warning from Smatch static analyser: drivers/scsi/mpt3sas/mpt3sas_base.c:5256 _base_allocate_memory_pools() warn: 'ioc->hpr_lookup' double freed drivers/scsi/mpt3sas/mpt3sas_base.c:5256 _base_allocate_memory_pools() warn: 'ioc->internal_lookup' double freed Link: https://lore.kernel.org/r/20200508110738.30732-1-suganath-prabu.subramani@broadcom.com Reported-by: Dan Carpenter Signed-off-by: Suganath Prabu S Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 3e40ef30c08f50225dac881bcaa1ad9a7cc938f6 Author: Dmitry Osipenko Date: Sun Mar 29 18:15:44 2020 +0200 power: supply: smb347-charger: IRQSTAT_D is volatile [ Upstream commit c32ea07a30630ace950e07ffe7a18bdcc25898e1 ] Fix failure when USB cable is connected: smb347 2-006a: reading IRQSTAT_D failed Fixes: 1502cfe19bac ("smb347-charger: Fix battery status reporting logic for charger faults") Tested-by: David Heidelberg Signed-off-by: Dmitry Osipenko Signed-off-by: David Heidelberg Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin commit edbdbc723b4e0a0a9d6b7dd2808fabf4bd6a0e36 Author: Kai-Heng Feng Date: Wed May 6 01:34:21 2020 +0800 PCI/ASPM: Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges [ Upstream commit 66ff14e59e8a30690755b08bc3042359703fb07a ] 7d715a6c1ae5 ("PCI: add PCI Express ASPM support") added the ability for Linux to enable ASPM, but for some undocumented reason, it didn't enable ASPM on links where the downstream component is a PCIe-to-PCI/PCI-X Bridge. Remove this exclusion so we can enable ASPM on these links. The Dell OptiPlex 7080 mentioned in the bugzilla has a TI XIO2001 PCIe-to-PCI Bridge. Enabling ASPM on the link leading to it allows the Intel SoC to enter deeper Package C-states, which is a significant power savings. [bhelgaas: commit log] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207571 Link: https://lore.kernel.org/r/20200505173423.26968-1-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng Signed-off-by: Bjorn Helgaas Reviewed-by: Mika Westerberg Signed-off-by: Sasha Levin commit 3993a8eb1ed00e6e65457cfc5112c61b5853a755 Author: Kuppuswamy Sathyanarayanan Date: Wed Apr 8 14:40:03 2020 -0700 drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a driver developer is foolish [ Upstream commit 388bcc6ecc609fca1b4920de7dc3806c98ec535e ] If platform bus driver registration is failed then, accessing platform bus spin lock (&drv->driver.bus->p->klist_drivers.k_lock) in __platform_driver_probe() without verifying the return value __platform_driver_register() can lead to NULL pointer exception. So check the return value before attempting the spin lock. One such example is below: For a custom usecase, I have intentionally failed the platform bus registration and I expected all the platform device/driver registrations to fail gracefully. But I came across this panic issue. [ 1.331067] BUG: kernel NULL pointer dereference, address: 00000000000000c8 [ 1.331118] #PF: supervisor write access in kernel mode [ 1.331163] #PF: error_code(0x0002) - not-present page [ 1.331208] PGD 0 P4D 0 [ 1.331233] Oops: 0002 [#1] PREEMPT SMP [ 1.331268] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 5.6.0-00049-g670d35fb0144 #165 [ 1.331341] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [ 1.331406] RIP: 0010:_raw_spin_lock+0x15/0x30 [ 1.331588] RSP: 0000:ffffc9000001be70 EFLAGS: 00010246 [ 1.331632] RAX: 0000000000000000 RBX: 00000000000000c8 RCX: 0000000000000001 [ 1.331696] RDX: 0000000000000001 RSI: 0000000000000092 RDI: 0000000000000000 [ 1.331754] RBP: 00000000ffffffed R08: 0000000000000501 R09: 0000000000000001 [ 1.331817] R10: ffff88817abcc520 R11: 0000000000000670 R12: 00000000ffffffed [ 1.331881] R13: ffffffff82dbc268 R14: ffffffff832f070a R15: 0000000000000000 [ 1.331945] FS: 0000000000000000(0000) GS:ffff88817bd80000(0000) knlGS:0000000000000000 [ 1.332008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.332062] CR2: 00000000000000c8 CR3: 000000000681e001 CR4: 00000000003606e0 [ 1.332126] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1.332189] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1.332252] Call Trace: [ 1.332281] __platform_driver_probe+0x92/0xee [ 1.332323] ? rtc_dev_init+0x2b/0x2b [ 1.332358] cmos_init+0x37/0x67 [ 1.332396] do_one_initcall+0x7d/0x168 [ 1.332428] kernel_init_freeable+0x16c/0x1c9 [ 1.332473] ? rest_init+0xc0/0xc0 [ 1.332508] kernel_init+0x5/0x100 [ 1.332543] ret_from_fork+0x1f/0x30 [ 1.332579] CR2: 00000000000000c8 [ 1.332616] ---[ end trace 3bd87f12e9010b87 ]--- [ 1.333549] note: swapper/0[1] exited with preempt_count 1 [ 1.333592] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 1.333736] Kernel Offset: disabled Note, this can only be triggered if a driver errors out from this call, which should never happen. If it does, the driver needs to be fixed. Signed-off-by: Kuppuswamy Sathyanarayanan Link: https://lore.kernel.org/r/20200408214003.3356-1-sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 428006b4573b0a8da191f66b19c9fa1303a6a8cb Author: John Stultz Date: Tue Apr 28 18:40:50 2020 +0000 serial: amba-pl011: Make sure we initialize the port.lock spinlock [ Upstream commit 8508f4cba308f785b2fd4b8c38849c117b407297 ] Valentine reported seeing: [ 3.626638] INFO: trying to register non-static key. [ 3.626639] the code is fine but needs lockdep annotation. [ 3.626640] turning off the locking correctness validator. [ 3.626644] CPU: 7 PID: 51 Comm: kworker/7:1 Not tainted 5.7.0-rc2-00115-g8c2e9790f196 #116 [ 3.626646] Hardware name: HiKey960 (DT) [ 3.626656] Workqueue: events deferred_probe_work_func [ 3.632476] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes) [ 3.640220] Call trace: [ 3.640225] dump_backtrace+0x0/0x1b8 [ 3.640227] show_stack+0x20/0x30 [ 3.640230] dump_stack+0xec/0x158 [ 3.640234] register_lock_class+0x598/0x5c0 [ 3.640235] __lock_acquire+0x80/0x16c0 [ 3.640236] lock_acquire+0xf4/0x4a0 [ 3.640241] _raw_spin_lock_irqsave+0x70/0xa8 [ 3.640245] uart_add_one_port+0x388/0x4b8 [ 3.640248] pl011_register_port+0x70/0xf0 [ 3.640250] pl011_probe+0x184/0x1b8 [ 3.640254] amba_probe+0xdc/0x180 [ 3.640256] really_probe+0xe0/0x338 [ 3.640257] driver_probe_device+0x60/0xf8 [ 3.640259] __device_attach_driver+0x8c/0xd0 [ 3.640260] bus_for_each_drv+0x84/0xd8 [ 3.640261] __device_attach+0xe4/0x140 [ 3.640263] device_initial_probe+0x1c/0x28 [ 3.640265] bus_probe_device+0xa4/0xb0 [ 3.640266] deferred_probe_work_func+0x7c/0xb8 [ 3.640269] process_one_work+0x2c0/0x768 [ 3.640271] worker_thread+0x4c/0x498 [ 3.640272] kthread+0x14c/0x158 [ 3.640275] ret_from_fork+0x10/0x1c Which seems to be due to the fact that after allocating the uap structure, nothing initializes the spinlock. Its a little confusing, as uart_port_spin_lock_init() is one place where the lock is supposed to be initialized, but it has an exception for the case where the port is a console. This makes it seem like a deeper fix is needed to properly register the console, but I'm not sure what that entails, and Andy suggested that this approach is less invasive. Thus, this patch resolves the issue by initializing the spinlock in the driver, and resolves the resulting warning. Cc: Andy Shevchenko Cc: Russell King Cc: Jiri Slaby Cc: linux-serial@vger.kernel.org Reported-by: Valentin Schneider Reviewed-by: Andy Shevchenko Signed-off-by: John Stultz Reviewed-and-tested-by: Valentin Schneider Link: https://lore.kernel.org/r/20200428184050.6501-1-john.stultz@linaro.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 31fe262ad0d5326f7b38a91ebb95e68599e0d4fd Author: Russell King Date: Mon Apr 27 19:49:22 2020 +0100 i2c: pxa: fix i2c_pxa_scream_blue_murder() debug output [ Upstream commit 88b73ee7ca4c90baf136ed5a8377fc5a9b73ac08 ] The IRQ log output is supposed to appear on a single line. However, commit 3a2dc1677b60 ("i2c: pxa: Update debug function to dump more info on error") resulted in it being printed one-entry-per-line, which is excessively long. Fixing this is not a trivial matter; using pr_cont() doesn't work as the previous dev_dbg() may not have been compiled in, or may be dynamic. Since the rest of this function output is at error level, and is also debug output, promote this to error level as well to avoid this problem. Reduce the number of always zero prefix digits to save screen real- estate. Signed-off-by: Russell King Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin commit e806b55b72d6cdce86d33a8d455b9fc12fc0abc6 Author: Matej Dujava Date: Thu Apr 30 22:09:24 2020 +0200 staging: sm750fb: add missing case while setting FB_VISUAL [ Upstream commit fa90133377f4a7f15a937df6ad55133bb57c5665 ] Switch statement does not contain all cases: 8, 16, 24, 32. This patch will add missing one (24) Fixes: 81dee67e215b ("staging: sm750fb: add sm750 to staging") Signed-off-by: Matej Dujava Link: https://lore.kernel.org/r/1588277366-19354-2-git-send-email-mdujava@kocurkovo.cz Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit ba3badce3e0581ad6bb726f6a586625c622ec6c5 Author: Raghavendra Rao Ananta Date: Mon Apr 27 20:26:01 2020 -0700 tty: hvc: Fix data abort due to race in hvc_open [ Upstream commit e2bd1dcbe1aa34ff5570b3427c530e4332ecf0fe ] Potentially, hvc_open() can be called in parallel when two tasks calls open() on /dev/hvcX. In such a scenario, if the hp->ops->notifier_add() callback in the function fails, where it sets the tty->driver_data to NULL, the parallel hvc_open() can see this NULL and cause a memory abort. Hence, serialize hvc_open and check if tty->private_data is NULL before proceeding ahead. The issue can be easily reproduced by launching two tasks simultaneously that does nothing but open() and close() on /dev/hvcX. For example: $ ./simple_open_close /dev/hvc0 & ./simple_open_close /dev/hvc0 & Signed-off-by: Raghavendra Rao Ananta Link: https://lore.kernel.org/r/20200428032601.22127-1-rananta@codeaurora.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 4e22955825919d871f5d70bbbfe6f50dc89550a8 Author: Julian Wiedmann Date: Thu Apr 9 09:59:39 2020 +0200 s390/qdio: put thinint indicator after early error [ Upstream commit 75e82bec6b2622c6f455b7a543fb5476a5d0eed7 ] qdio_establish() calls qdio_setup_thinint() via qdio_setup_irq(). If the subsequent qdio_establish_thinint() fails, we miss to put the DSCI again. Thus the DSCI isn't available for re-use. Given enough of such errors, we could end up with having only the shared DSCI available. Merge qdio_setup_thinint() into qdio_establish_thinint(), and deal with such an error internally. Fixes: 779e6e1c724d ("[S390] qdio: new qdio driver.") Signed-off-by: Julian Wiedmann Reviewed-by: Benjamin Block Signed-off-by: Vasily Gorbik Signed-off-by: Sasha Levin commit 02c56650f3c118d3752122996d96173d26bb13aa Author: Alexander Tsoy Date: Fri Apr 24 05:24:48 2020 +0300 ALSA: usb-audio: Improve frames size computation [ Upstream commit f0bd62b64016508938df9babe47f65c2c727d25c ] For computation of the the next frame size current value of fs/fps and accumulated fractional parts of fs/fps are used, where values are stored in Q16.16 format. This is quite natural for computing frame size for asynchronous endpoints driven by explicit feedback, since in this case fs/fps is a value provided by the feedback endpoint and it's already in the Q format. If an error is accumulated over time, the device can adjust fs/fps value to prevent buffer overruns/underruns. But for synchronous endpoints the accuracy provided by these computations is not enough. Due to accumulated error the driver periodically produces frames with incorrect size (+/- 1 audio sample). This patch fixes this issue by implementing a different algorithm for frame size computation. It is based on accumulating of the remainders from division fs/fps and it doesn't accumulate errors over time. This new method is enabled for synchronous and adaptive playback endpoints. Signed-off-by: Alexander Tsoy Link: https://lore.kernel.org/r/20200424022449.14972-1-alexander@tsoy.me Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 281bef843ee742469e23c9be0e857a468a52e87c Author: Tyrel Datwyler Date: Wed Jun 3 15:36:32 2020 -0500 scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM [ Upstream commit 4919b33b63c8b69d8dcf2b867431d0e3b6dc6d28 ] The adapter info MAD is used to send the client info and receive the host info as a response. A persistent buffer is used and as such the client info is overwritten after the response. During the course of a normal adapter reset the client info is refreshed in the buffer in preparation for sending the adapter info MAD. However, in the special case of LPM where we reenable the CRQ instead of a full CRQ teardown and reset we fail to refresh the client info in the adapter info buffer. As a result, after Live Partition Migration (LPM) we erroneously report the host's info as our own. [mkp: typos] Link: https://lore.kernel.org/r/20200603203632.18426-1-tyreld@linux.ibm.com Signed-off-by: Tyrel Datwyler Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 27a7c9b66b77e82bb45dce337a5a374f5b3e20b5 Author: Simon Arlott Date: Sat May 30 18:59:44 2020 +0100 scsi: sr: Fix sr_probe() missing deallocate of device minor [ Upstream commit 6555781b3fdec5e94e6914511496144241df7dee ] If the cdrom fails to be registered then the device minor should be deallocated. Link: https://lore.kernel.org/r/072dac4b-8402-4de8-36bd-47e7588969cd@0882a8b5-c6c3-11e9-b005-00805fc181fe Signed-off-by: Simon Arlott Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 025c48a5eb0f4e2763644d715e0040c644d7d531 Author: ashimida Date: Tue Jun 2 15:45:17 2020 +0800 mksysmap: Fix the mismatch of '.L' symbols in System.map [ Upstream commit 72d24accf02add25e08733f0ecc93cf10fcbd88c ] When System.map was generated, the kernel used mksysmap to filter the kernel symbols, but all the symbols with the second letter 'L' in the kernel were filtered out, not just the symbols starting with 'dot + L'. For example: ashimida@ubuntu:~/linux$ cat System.map |grep ' .L' ashimida@ubuntu:~/linux$ nm -n vmlinux |grep ' .L' ffff0000088028e0 t bLength_show ...... ffff0000092e0408 b PLLP_OUTC_lock ffff0000092e0410 b PLLP_OUTA_lock The original intent should be to filter out all local symbols starting with '.L', so the dot should be escaped. Fixes: 00902e984732 ("mksysmap: Add h8300 local symbol pattern") Signed-off-by: ashimida Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin commit 9f34721c28ebf58389e5fb138a7f11e6a4144977 Author: Wang Hai Date: Thu Jun 4 20:18:51 2020 +0800 yam: fix possible memory leak in yam_init_driver [ Upstream commit 98749b7188affbf2900c2aab704a8853901d1139 ] If register_netdev(dev) fails, free_netdev(dev) needs to be called, otherwise a memory leak will occur. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot Signed-off-by: Wang Hai Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 94feb3b5641132f370aa71bde8ac70d35fd19b8e Author: Pingfan Liu Date: Wed Apr 1 22:00:44 2020 +0800 powerpc/crashkernel: Take "mem=" option into account [ Upstream commit be5470e0c285a68dc3afdea965032f5ddc8269d7 ] 'mem=" option is an easy way to put high pressure on memory during some test. Hence after applying the memory limit, instead of total mem, the actual usable memory should be considered when reserving mem for crashkernel. Otherwise the boot up may experience OOM issue. E.g. it would reserve 4G prior to the change and 512M afterward, if passing crashkernel="2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G", and mem=5G on a 256G machine. This issue is powerpc specific because it puts higher priority on fadump and kdump reservation than on "mem=". Referring the following code: if (fadump_reserve_mem() == 0) reserve_crashkernel(); ... /* Ensure that total memory size is page-aligned. */ limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE); memblock_enforce_memory_limit(limit); While on other arches, the effect of "mem=" takes a higher priority and pass through memblock_phys_mem_size() before calling reserve_crashkernel(). Signed-off-by: Pingfan Liu Reviewed-by: Hari Bathini Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/1585749644-4148-1-git-send-email-kernelfans@gmail.com Signed-off-by: Sasha Levin commit f5a50e848e4509448b8b91536b5d421722bf154b Author: Xiyu Yang Date: Mon May 25 22:15:41 2020 +0800 nfsd: Fix svc_xprt refcnt leak when setup callback client failed [ Upstream commit a4abc6b12eb1f7a533c2e7484cfa555454ff0977 ] nfsd4_process_cb_update() invokes svc_xprt_get(), which increases the refcount of the "c->cn_xprt". The reference counting issue happens in one exception handling path of nfsd4_process_cb_update(). When setup callback client failed, the function forgets to decrease the refcnt increased by svc_xprt_get(), causing a refcnt leak. Fix this issue by calling svc_xprt_put() when setup callback client failed. Signed-off-by: Xiyu Yang Signed-off-by: Xin Tan Signed-off-by: J. Bruce Fields Signed-off-by: Sasha Levin commit de8acbd41c207d15d5bb056a353ed36e4eaa4f26 Author: Xiyu Yang Date: Mon May 25 22:16:24 2020 +0800 scsi: lpfc: Fix lpfc_nodelist leak when processing unsolicited event [ Upstream commit 7217e6e694da3aae6d17db8a7f7460c8d4817ebf ] In order to create or activate a new node, lpfc_els_unsol_buffer() invokes lpfc_nlp_init() or lpfc_enable_node() or lpfc_nlp_get(), all of them will return a reference of the specified lpfc_nodelist object to "ndlp" with increased refcnt. When lpfc_els_unsol_buffer() returns, local variable "ndlp" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one exception handling path of lpfc_els_unsol_buffer(). When "ndlp" in DEV_LOSS, the function forgets to decrease the refcnt increased by lpfc_nlp_init() or lpfc_enable_node() or lpfc_nlp_get(), causing a refcnt leak. Fix this issue by calling lpfc_nlp_put() when "ndlp" in DEV_LOSS. Link: https://lore.kernel.org/r/1590416184-52592-1-git-send-email-xiyuyang19@fudan.edu.cn Reviewed-by: Daniel Wagner Reviewed-by: James Smart Signed-off-by: Xiyu Yang Signed-off-by: Xin Tan Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit f188af0ff63f7f3aa5d939a7bc78fd5a34a40296 Author: Marek Szyprowski Date: Mon Apr 27 09:48:29 2020 +0200 mfd: wm8994: Fix driver operation if loaded as modules [ Upstream commit d4f9b5428b53dd67f49ee8deed8d4366ed6b1933 ] WM8994 chip has built-in regulators, which might be used for chip operation. They are controlled by a separate wm8994-regulator driver, which should be loaded before this driver calls regulator_get(), because that driver also provides consumer-supply mapping for the them. If that driver is not yet loaded, regulator core substitute them with dummy regulator, what breaks chip operation, because the built-in regulators are never enabled. Fix this by annotating this driver with MODULE_SOFTDEP() "pre" dependency to "wm8994_regulator" module. Signed-off-by: Marek Szyprowski Acked-by: Charles Keepax Signed-off-by: Lee Jones Signed-off-by: Sasha Levin commit 90168376586697d471f26515b38a36bbcc4c2d10 Author: Qian Cai Date: Sun May 10 12:16:56 2020 -0400 vfio/pci: fix memory leaks in alloc_perm_bits() [ Upstream commit 3e63b94b6274324ff2e7d8615df31586de827c4e ] vfio_pci_disable() calls vfio_config_free() but forgets to call free_perm_bits() resulting in memory leaks, unreferenced object 0xc000000c4db2dee0 (size 16): comm "qemu-kvm", pid 4305, jiffies 4295020272 (age 3463.780s) hex dump (first 16 bytes): 00 00 ff 00 ff ff ff ff ff ff ff ff ff ff 00 00 ................ backtrace: [<00000000a6a4552d>] alloc_perm_bits+0x58/0xe0 [vfio_pci] [<00000000ac990549>] vfio_config_init+0xdf0/0x11b0 [vfio_pci] init_pci_cap_msi_perm at drivers/vfio/pci/vfio_pci_config.c:1125 (inlined by) vfio_msi_cap_len at drivers/vfio/pci/vfio_pci_config.c:1180 (inlined by) vfio_cap_len at drivers/vfio/pci/vfio_pci_config.c:1241 (inlined by) vfio_cap_init at drivers/vfio/pci/vfio_pci_config.c:1468 (inlined by) vfio_config_init at drivers/vfio/pci/vfio_pci_config.c:1707 [<000000006db873a1>] vfio_pci_open+0x234/0x700 [vfio_pci] [<00000000630e1906>] vfio_group_fops_unl_ioctl+0x8e0/0xb84 [vfio] [<000000009e34c54f>] ksys_ioctl+0xd8/0x130 [<000000006577923d>] sys_ioctl+0x28/0x40 [<000000006d7b1cf2>] system_call_exception+0x114/0x1e0 [<0000000008ea7dd5>] system_call_common+0xf0/0x278 unreferenced object 0xc000000c4db2e330 (size 16): comm "qemu-kvm", pid 4305, jiffies 4295020272 (age 3463.780s) hex dump (first 16 bytes): 00 ff ff 00 ff ff ff ff ff ff ff ff ff ff 00 00 ................ backtrace: [<000000004c71914f>] alloc_perm_bits+0x44/0xe0 [vfio_pci] [<00000000ac990549>] vfio_config_init+0xdf0/0x11b0 [vfio_pci] [<000000006db873a1>] vfio_pci_open+0x234/0x700 [vfio_pci] [<00000000630e1906>] vfio_group_fops_unl_ioctl+0x8e0/0xb84 [vfio] [<000000009e34c54f>] ksys_ioctl+0xd8/0x130 [<000000006577923d>] sys_ioctl+0x28/0x40 [<000000006d7b1cf2>] system_call_exception+0x114/0x1e0 [<0000000008ea7dd5>] system_call_common+0xf0/0x278 Fixes: 89e1f7d4c66d ("vfio: Add PCI device driver") Signed-off-by: Qian Cai [aw: rolled in follow-up patch] Signed-off-by: Alex Williamson Signed-off-by: Sasha Levin commit 844810b092ed2014794b62eee8f199c06baf0033 Author: Emmanuel Nicolet Date: Sat May 9 18:58:32 2020 +0000 ps3disk: use the default segment boundary [ Upstream commit 720bc316690bd27dea9d71510b50f0cd698ffc32 ] Since commit dcebd755926b ("block: use bio_for_each_bvec() to compute multi-page bvec count"), the kernel will bug_on on the PS3 because bio_split() is called with sectors == 0: kernel BUG at block/bio.c:1853! Oops: Exception in kernel mode, sig: 5 [#1] BE PAGE_SIZE=4K MMU=Hash PREEMPT SMP NR_CPUS=8 NUMA PS3 Modules linked in: firewire_sbp2 rtc_ps3(+) soundcore ps3_gelic(+) \ ps3rom(+) firewire_core ps3vram(+) usb_common crc_itu_t CPU: 0 PID: 97 Comm: blkid Not tainted 5.3.0-rc4 #1 NIP: c00000000027d0d0 LR: c00000000027d0b0 CTR: 0000000000000000 REGS: c00000000135ae90 TRAP: 0700 Not tainted (5.3.0-rc4) MSR: 8000000000028032 CR: 44008240 XER: 20000000 IRQMASK: 0 GPR00: c000000000289368 c00000000135b120 c00000000084a500 c000000004ff8300 GPR04: 0000000000000c00 c000000004c905e0 c000000004c905e0 000000000000ffff GPR08: 0000000000000000 0000000000000001 0000000000000000 000000000000ffff GPR12: 0000000000000000 c0000000008ef000 000000000000003e 0000000000080001 GPR16: 0000000000000100 000000000000ffff 0000000000000000 0000000000000004 GPR20: c00000000062fd7e 0000000000000001 000000000000ffff 0000000000000080 GPR24: c000000000781788 c00000000135b350 0000000000000080 c000000004c905e0 GPR28: c00000000135b348 c000000004ff8300 0000000000000000 c000000004c90000 NIP [c00000000027d0d0] .bio_split+0x28/0xac LR [c00000000027d0b0] .bio_split+0x8/0xac Call Trace: [c00000000135b120] [c00000000027d130] .bio_split+0x88/0xac (unreliable) [c00000000135b1b0] [c000000000289368] .__blk_queue_split+0x11c/0x53c [c00000000135b2d0] [c00000000028f614] .blk_mq_make_request+0x80/0x7d4 [c00000000135b3d0] [c000000000283a8c] .generic_make_request+0x118/0x294 [c00000000135b4b0] [c000000000283d34] .submit_bio+0x12c/0x174 [c00000000135b580] [c000000000205a44] .mpage_bio_submit+0x3c/0x4c [c00000000135b600] [c000000000206184] .mpage_readpages+0xa4/0x184 [c00000000135b750] [c0000000001ff8fc] .blkdev_readpages+0x24/0x38 [c00000000135b7c0] [c0000000001589f0] .read_pages+0x6c/0x1a8 [c00000000135b8b0] [c000000000158c74] .__do_page_cache_readahead+0x118/0x184 [c00000000135b9b0] [c0000000001591a8] .force_page_cache_readahead+0xe4/0xe8 [c00000000135ba50] [c00000000014fc24] .generic_file_read_iter+0x1d8/0x830 [c00000000135bb50] [c0000000001ffadc] .blkdev_read_iter+0x40/0x5c [c00000000135bbc0] [c0000000001b9e00] .new_sync_read+0x144/0x1a0 [c00000000135bcd0] [c0000000001bc454] .vfs_read+0xa0/0x124 [c00000000135bd70] [c0000000001bc7a4] .ksys_read+0x70/0xd8 [c00000000135be20] [c00000000000a524] system_call+0x5c/0x70 Instruction dump: 7fe3fb78 482e30dc 7c0802a6 482e3085 7c9e2378 f821ff71 7ca42b78 7d3e00d0 7c7d1b78 79290fe0 7cc53378 69290001 <0b090000> 81230028 7bca0020 7929ba62 [ end trace 313fec760f30aa1f ]--- The problem originates from setting the segment boundary of the request queue to -1UL. This makes get_max_segment_size() return zero when offset is zero, whatever the max segment size. The test with BLK_SEG_BOUNDARY_MASK fails and 'mask - (mask & offset) + 1' overflows to zero in the return statement. Not setting the segment boundary and using the default value (BLK_SEG_BOUNDARY_MASK) fixes the problem. Signed-off-by: Emmanuel Nicolet Signed-off-by: Geoff Levand Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/060a416c43138f45105c0540eff1a45539f7e2fc.1589049250.git.geoff@infradead.org Signed-off-by: Sasha Levin commit d6503bd6a24c7875d56aa2be44eb9dd5542f0406 Author: Oliver Neukum Date: Thu May 7 10:58:06 2020 +0200 usblp: poison URBs upon disconnect [ Upstream commit 296a193b06120aa6ae7cf5c0d7b5e5b55968026e ] syzkaller reported an URB that should have been killed to be active. We do not understand it, but this should fix the issue if it is real. Signed-off-by: Oliver Neukum Reported-by: syzbot+be5b5f86a162a6c281e6@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200507085806.5793-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit bc601c4642fc69d36439d67c0237719b6a3b84d9 Author: Russell King Date: Wed May 6 10:36:38 2020 +0100 i2c: pxa: clear all master action bits in i2c_pxa_stop_message() [ Upstream commit e81c979f4e071d516aa27cf5a0c3939da00dc1ca ] If we timeout during a message transfer, the control register may contain bits that cause an action to be set. Read-modify-writing the register leaving these bits set may trigger the hardware to attempt one of these actions unintentionally. Always clear these bits when cleaning up after a message or after a timeout. Signed-off-by: Russell King Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin commit f876da3fd44c12e5c63a7a27bc11fbeb3b9cdf25 Author: Viacheslav Dubeyko Date: Wed Apr 22 13:55:52 2020 +0300 scsi: qla2xxx: Fix issue with adapter's stopping state [ Upstream commit 803e45550b11c8e43d89812356fe6f105adebdf9 ] The goal of the following command sequence is to restart the adapter. However, the tgt_stop flag remains set, indicating that the adapter is still in stopping state even after re-enabling it. echo 0x7fffffff > /sys/module/qla2xxx/parameters/logging modprobe target_core_mod modprobe tcm_qla2xxx mkdir /sys/kernel/config/target/qla2xxx mkdir /sys/kernel/config/target/qla2xxx/ mkdir /sys/kernel/config/target/qla2xxx//tpgt_1 echo 1 > /sys/kernel/config/target/qla2xxx//tpgt_1/enable echo 0 > /sys/kernel/config/target/qla2xxx//tpgt_1/enable echo 1 > /sys/kernel/config/target/qla2xxx//tpgt_1/enable kernel: PID 1396:qla_target.c:1555 qlt_stop_phase1(): tgt_stop 0x0, tgt_stopped 0x0 kernel: qla2xxx [0001:00:02.0]-e803:1: PID 1396:qla_target.c:1567: Stopping target for host 1(c0000000033557e8) kernel: PID 1396:qla_target.c:1579 qlt_stop_phase1(): tgt_stop 0x1, tgt_stopped 0x0 kernel: PID 1396:qla_target.c:1266 qlt_schedule_sess_for_deletion(): tgt_stop 0x1, tgt_stopped 0x0 kernel: qla2xxx [0001:00:02.0]-e801:1: PID 1396:qla_target.c:1316: Scheduling sess c00000002d5cd800 for deletion 21:00:00:24:ff:7f:35:c7 kernel: qla2xxx [0001:00:02.0]-290a:1: PID 340:qla_target.c:1187: qlt_unreg_sess sess c00000002d5cd800 for deletion 21:00:00:24:ff:7f:35:c7 kernel: qla2xxx [0001:00:02.0]-f801:1: PID 340:qla_target.c:1145: Unregistration of sess c00000002d5cd800 21:00:00:24:ff:7f:35:c7 finished fcp_cnt 0 kernel: PID 340:qla_target.c:1155 qlt_free_session_done(): tgt_stop 0x1, tgt_stopped 0x0 kernel: qla2xxx [0001:00:02.0]-4807:1: PID 346:qla_os.c:6329: ISP abort scheduled. kernel: qla2xxx [0001:00:02.0]-28f1:1: PID 346:qla_os.c:3956: Mark all dev lost kernel: PID 346:qla_target.c:1266 qlt_schedule_sess_for_deletion(): tgt_stop 0x1, tgt_stopped 0x0 kernel: qla2xxx [0001:00:02.0]-4808:1: PID 346:qla_os.c:6338: ISP abort end. kernel: PID 1396:qla_target.c:6812 qlt_enable_vha(): tgt_stop 0x1, tgt_stopped 0x0 kernel: qla2xxx [0001:00:02.0]-4807:1: PID 346:qla_os.c:6329: ISP abort scheduled. kernel: qla2xxx [0001:00:02.0]-4808:1: PID 346:qla_os.c:6338: ISP abort end. qlt_handle_cmd_for_atio() rejects the request to send commands because the adapter is in the stopping state: kernel: PID 0:qla_target.c:4442 qlt_handle_cmd_for_atio(): tgt_stop 0x1, tgt_stopped 0x0 kernel: qla2xxx [0001:00:02.0]-3861:1: PID 0:qla_target.c:4447: New command while device c000000005314600 is shutting down kernel: qla2xxx [0001:00:02.0]-e85f:1: PID 0:qla_target.c:5728: qla_target: Unable to send command to target This patch calls qla_stop_phase2() in addition to qlt_stop_phase1() in tcm_qla2xxx_tpg_enable_store() and tcm_qla2xxx_npiv_tpg_enable_store(). The qlt_stop_phase1() marks adapter as stopping (tgt_stop == 0x1, tgt_stopped == 0x0) but qlt_stop_phase2() marks adapter as stopped (tgt_stop == 0x0, tgt_stopped == 0x1). Link: https://lore.kernel.org/r/52be1e8a3537f6c5407eae3edd4c8e08a9545ea5.camel@yadro.com Reviewed-by: Roman Bolshakov Reviewed-by: Himanshu Madhani Signed-off-by: Viacheslav Dubeyko Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit f4ea855de425162d20e5a45b4a29e220dfa67877 Author: Dan Carpenter Date: Fri May 1 12:40:11 2020 +0300 ALSA: isa/wavefront: prevent out of bounds write in ioctl [ Upstream commit 7f0d5053c5a9d23fe5c2d337495a9d79038d267b ] The "header->number" comes from the ioctl and it needs to be clamped to prevent out of bounds writes. Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20200501094011.GA960082@mwanda Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 9ec09642f5cd064102ad2ffe2037c07771fd0bb4 Author: Bryan O'Donoghue Date: Sun Mar 29 13:41:16 2020 +0100 clk: qcom: msm8916: Fix the address location of pll->config_reg [ Upstream commit f47ab3c2f5338828a67e89d5f688d2cef9605245 ] During the process of debugging a processor derived from the msm8916 which we found the new processor was not starting one of its PLLs. After tracing the addresses and writes that downstream was doing and comparing to upstream it became obvious that we were writing to a different register location than downstream when trying to configure the PLL. This error is also present in upstream msm8916. As an example clk-pll.c::clk_pll_recalc_rate wants to write to pll->config_reg updating the bit-field POST_DIV_RATIO. That bit-field is defined in PLL_USER_CTL not in PLL_CONFIG_CTL. Taking the BIMC PLL as an example lm80-p0436-13_c_qc_snapdragon_410_processor_hrd.pdf 0x01823010 GCC_BIMC_PLL_USER_CTL 0x01823014 GCC_BIMC_PLL_CONFIG_CTL This pattern is repeated for gpll0, gpll1, gpll2 and bimc_pll. This error is likely not apparent since the bootloader will already have initialized these PLLs. This patch corrects the location of config_reg from PLL_CONFIG_CTL to PLL_USER_CTL for all relevant PLLs on msm8916. Fixes commit 3966fab8b6ab ("clk: qcom: Add MSM8916 Global Clock Controller support") Cc: Georgi Djakov Cc: Andy Gross Cc: Bjorn Andersson Cc: Michael Turquette Cc: Stephen Boyd Signed-off-by: Bryan O'Donoghue Link: https://lkml.kernel.org/r/20200329124116.4185447-1-bryan.odonoghue@linaro.org Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin commit adcd53860d5bf1c19e209079b7e3b371666b7398 Author: Adam Honse Date: Fri Apr 10 15:48:44 2020 -0500 i2c: piix4: Detect secondary SMBus controller on AMD AM4 chipsets [ Upstream commit f27237c174fd9653033330e4e532cd9d153ce824 ] The AMD X370 and other AM4 chipsets (A/B/X 3/4/5 parts) and Threadripper equivalents have a secondary SMBus controller at I/O port address 0x0B20. This bus is used by several manufacturers to control motherboard RGB lighting via embedded controllers. I have been using this bus in my OpenRGB project to control the Aura RGB on many motherboards and ASRock also uses this bus for their Polychrome RGB controller. I am not aware of any CZ-compatible platforms which do not have the second SMBus channel. All of AMD's AM4- and Threadripper- series chipsets that OpenRGB users have tested appear to have this secondary bus. I also noticed this secondary bus is present on older AMD platforms including my FM1 home server. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202587 Signed-off-by: Adam Honse Reviewed-by: Jean Delvare Reviewed-by: Sebastian Reichel Tested-by: Sebastian Reichel Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin commit 55597918d5226ac2f2c8c235e270c79b846c415f Author: Rikard Falkeborn Date: Tue Mar 17 22:13:32 2020 +0100 clk: sunxi: Fix incorrect usage of round_down() [ Upstream commit ee25d9742dabed3fd18158b518f846abeb70f319 ] round_down() can only round to powers of 2. If round_down() is asked to round to something that is not a power of 2, incorrect results are produced. The incorrect results can be both too large and too small. Instead, use rounddown() which can round to any number. Fixes: 6a721db180a2 ("clk: sunxi: Add A31 clocks support") Signed-off-by: Rikard Falkeborn Signed-off-by: Maxime Ripard Signed-off-by: Sasha Levin commit 52a238a13ae0edd4d510e84da5ad68d40b74d249 Author: Dmitry V. Levin Date: Tue Jun 2 21:00:51 2020 +0300 s390: fix syscall_get_error for compat processes commit b3583fca5fb654af2cfc1c08259abb9728272538 upstream. If both the tracer and the tracee are compat processes, and gprs[2] is assigned a value by __poke_user_compat, then the higher 32 bits of gprs[2] are cleared, IS_ERR_VALUE() always returns false, and syscall_get_error() always returns 0. Fix the implementation by sign-extending the value for compat processes the same way as x86 implementation does. The bug was exposed to user space by commit 201766a20e30f ("ptrace: add PTRACE_GET_SYSCALL_INFO request") and detected by strace test suite. This change fixes strace syscall tampering on s390. Link: https://lkml.kernel.org/r/20200602180051.GA2427@altlinux.org Fixes: 753c4dd6a2fa2 ("[S390] ptrace changes") Cc: Elvira Khabirova Cc: stable@vger.kernel.org # v2.6.28+ Signed-off-by: Dmitry V. Levin Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik Signed-off-by: Greg Kroah-Hartman